Skip to contentSkip to conversation

muas3001: added support for the LM75 sensor.

U-Boot Applied Heiko Schocher 2 participants 2 messages Sep 8, 2008 – Sep 10, 2008

lore
Share & tools
lore
#0 lore raw

[POWERPC] 82xx: added support for the LM75 Temp.
sensor on the muas3001 board.

---
 include/configs/muas3001.h |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)
include/configs/muas3001.h +10 -0
index 55f7b1e..bc085b8 100644
@@ -127,6 +127,7 @@
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_DTT
 #define CONFIG_CMD_ECHO
 #define CONFIG_CMD_IMMAP
 #define CONFIG_CMD_MII
@@ -240,6 +241,15 @@
 #define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 
+#define	CFG_EEPROM_PAGE_WRITE_ENABLE
+#define	CFG_EEPROM_PAGE_WRITE_BITS 3
+/* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
+#define	CONFIG_DTT_LM75		1	/* ON Semi's LM75               */
+#define	CONFIG_DTT_SENSORS	{0}	/* Sensor addresses             */
+#define	CFG_DTT_MAX_TEMP	70
+#define	CFG_DTT_LOW_TEMP	-30
+#define	CFG_DTT_HYSTERESIS	3
+
 #define CFG_IMMR		0xF0000000
 #define CFG_DEFAULT_IMMR	0x0F010000
 
Signature · 5 lines
1.5.6.1

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#1 lore raw

Dear Heiko Schocher,

Quoted 7 lines · In message <[email protected]> you wrote:

[POWERPC] 82xx: added support for the LM75 Temp.
sensor on the muas3001 board.

---
 include/configs/muas3001.h |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Monday is an awful way to spend one seventh of your life.