Skip to contentSkip to conversation

EDK10.1 and emaclite

DISCUSSION Georg Schardt 2 participants 2 messages Sep 8, 2008

lore
Share & tools
lore
#0 lore raw

Hi all,

im trying to use the emaclite core which comes with the EDK10.1 with the 2.6.26 kernel from git.xilinx.com on virtex4fx12 minimodul. the emac is detect by the kernel:

xilinx_emaclite xilinx_emaclite.0: MAC address is now 2: 0: 0: 0: 0: 0 xilinx_emaclite xilinx_emaclite.0: using fifo mode.
xilinx_emaclite xilinx_emaclite.0: Xilinx EMACLite at 0x81000000 mapped to 0xC5060000, irq=0

i can change the mac-address with ifconfig and i can give an ip-address to the device, but a ping is not possible and arp is not working. i think that the phy is not working right.

has someone others the same problem ? what can i changed ? i have tried out all possible phy driver in the linux kernel

a setup with the lltemac is working fine, but i want to use the emaclite

thanks
regards
georg

#1 lore raw

Hi Georg,

I don't really know much about the state of the emac lite driver in the Git tree. I inherited the Git tree with some stuff already in it.

I test the LL TEMAC driver, but haven't had the bandwidth and priority to do any emac lite testing.

Thanks,
John

Quoted 2 lines

-----Original Message-----
From: [email protected]

[mailto:linuxppc-embedded-

Quoted 10 lines

[email protected]] On Behalf Of Georg Schardt
Sent: Monday, September 08, 2008 10:30 AM
To: [email protected]
Subject: EDK10.1 and emaclite
=

Hi all,
=

im trying to use the emaclite core which comes with the EDK10.1 with

the

Quoted 1 line

2.6.26 kernel from git.xilinx.com on virtex4fx12 minimodul. the emac

is

Quoted 4 lines

detect by the kernel:
=

xilinx_emaclite xilinx_emaclite.0: MAC address is now 2: 0: 0: 0: 0:

0

Quoted 2 lines

xilinx_emaclite xilinx_emaclite.0: using fifo mode. xilinx_emaclite xilinx_emaclite.0: Xilinx EMACLite at 0x81000000

mapped

Quoted 4 lines

to 0xC5060000, irq=3D0
=

i can change the mac-address with ifconfig and i can give an

ip-address

Quoted 2 lines

to the device,
but a ping is not possible and arp is not working. i think that the

phy

Quoted 4 lines

is not working right.
=

has someone others the same problem ? what can i changed ? i have

tried

Quoted 4 lines

out all possible phy driver in the linux kernel
=

a setup with the lltemac is working fine, but i want to use the

emaclite

Quoted 11 lines

=

thanks
regards
georg
=

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

This email and any attachments are intended for the sole use of the named r= ecipient(s) and contain(s) confidential information that may be proprietary= , privileged or copyrighted under applicable law. If you are not the intend= ed recipient, do not read, copy, or forward this email message or any attac= hments. Delete this email message and any attachments immediately.