Skip to contentSkip to conversation

PCA9665 controller

DISCUSSION Marco Aurelio da Costa 2 participants 3 messages Sep 16, 2008 2 messages not in the archive I2C subsystem host drivers

lore
Share & tools
lore
#2 lore raw
In reply to a message not in the archive

Hello Marco,

Quoted 2 lines · Marco Aurelio da Costa

Is someone working on a driver for the PCA9665?
If not, I will start working on it.

You probably already found that yourself, I just want to make sure; there already is a pca-platform-driver and a pca-algorithm. They should be useful for you...

All the best,

Wolfram

Signature · 2 lines
  Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry

_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c

author
#4 lore raw
In reply to a message not in the archive

Hello Wolfram,

Quoted 8 lines · Wolfram Sang
Quoted 3 lines

Is someone working on a driver for the PCA9665?
If not, I will start working on it.

You probably already found that yourself, I just want to make sure; there already is a pca-platform-driver and a pca-algorithm. They should be useful for you...

Thanks, I noticed that. The PCA driver is written for the PCA9564. There are some differences between the 9665 and the 9564, that is why this driver cannot be used as is, but still they are very similar, and I will try to reuse as much code as possible.

Regards,

Marco

_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c