Skip to contentSkip to conversation

More things for writing new CPU ports.

DISCUSSION Meng Sun 2 participants 2 messages Sep 17, 2008 – Sep 22, 2008

lore
Share & tools
lore

Meng Sun

author
#0 lore raw

Hi all,

What should I do for implement Linux kernel on a new CPU and target board? I just read FAQ but it's just general information. Could you please tell me which documents(except CPU datasheets and target board documents) I should read?

Cheers,

#1 lore raw
Quoted 8 lines · Meng Sun

Hi all,

What should I do for implement Linux kernel on a new CPU and target board? I just read FAQ but it's just general information. Could you please tell me which documents(except CPU datasheets and target board documents) I should read?

Cheers,

That depends on what you mean by new CPU.

1) Your new CPU is an ASIC variant of an existing one. That is, it has a different part number, but is based on a supported processor core, e.g. MIPS, ARM, etc. In this case, you add a new board directory in arch/YourProc/. If the processor architecture has ASIC variant support, use it to cover the stuff internal to the ASIC.

2) Your new CPU is an extension or modification of an existing processor core. You have already updated GCC to support the extensions and now want kernel support for the OS relevant ones.
In this case, you probably need to update the CPU common files files in arch/YourProc, as well as create a board file for your target board.

3) You have designed a completely new processor core from scratch. You have implemented support for this core in GNU binutils, GCC, etc. You have ported a bootloader and now want Linux on your new system.
In this case, you create your own processor directory in arch/ and implement the primitives, probably using an existing similar architecture as a template. That directory is all yours, so you may decide using board or ASIC subdirectories.

In other words, the kernel is fairly modular and there is a good chance that you new CPU is already 90% supported.

Kind regards,

Iwo