alsa kernel module versioning problem]

Hello,

I am experiencing the same problem as described in the link below. How does one play with the #ifdefs in the compat.h file to negate these errors?

http://www.linuxtv.org/pipermail/linux-dvb/2006-September/012747.html

Thanks in advance.

Best Regards,

------------------------------------------------------------------------

Subject:
[Alsa-user] alsa kernel module versioning problem From:
Robert Vincent Krakora <[email protected]> Date:
Tue, 23 Sep 2008 16:01:55 -0400
To:
[email protected], [email protected]

To:
[email protected], [email protected]

I am running alsa on CentOS5 and get the following errors from em28xx_audio:

How can this be resolved?

em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device (2040:6513): interface 0, class 255
em28xx: device is attached to a USB 2.0 bus
em28xx: you're using the experimental/unstable tree from mcentral.de
em28xx: there's also a stable tree available but which is limited to
em28xx: linux <=2.6.19.2
em28xx: it's fine to use this driver but keep in mind that it will move
em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's
em28xx: proved to be stable
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
attach_inform: eeprom detected.
em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 13 65 d0 12 5c 03 82 1e 6a 18 em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 01 01 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 em28xx #0: i2c eeprom 70: 32 00 38 00 35 00 33 00 34 00 37 00 37 00 37 00 em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 38 00 30 00 00 00 em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85 em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 f9 8f em28xx #0: i2c eeprom c0: 1e f0 74 02 01 00 01 79 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85 em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 f9 8f em28xx #0: i2c eeprom f0: 1e f0 74 02 01 00 01 79 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a
Vendor/Product ID= 2040:6513
AC97 audio (5 sample rates)
500mA max power
Table at 0x24, strings=0x1e82, 0x186a, 0x0000
tveeprom 2-0050: Hauppauge model 65201, rev A1C0, serial# 2002937 tveeprom 2-0050: tuner model is Xceive XC3028 (idx 120, type 71) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
tveeprom 2-0050: audio processor is None (idx 0)
tveeprom 2-0050: has radio
tuner 2-0061: chip found @ 0xc2 (em28xx #0)
attach inform (default): detected I2C address c2 /home/silentm/MessageNet/v4l-dvb-kernel-cd030297f684/v4l/tuner-core.c:
setting tuner callback
tuner 0x61: Configuration acknowledged /home/silentm/MessageNet/v4l-dvb-kernel-cd030297f684/v4l/tuner-core.c:
setting tuner callback /home/silentm/MessageNet/v4l-dvb-kernel-cd030297f684/v4l/xc3028-tuner.c:
attach request! /home/silentm/MessageNet/v4l-dvb-kernel-cd030297f684/v4l/tuner-core.c:
xc3028 tuner successfully loaded
attach_inform: tvp5150 detected.
tvp5150 2-005c: tvp5150am1 detected.
Loading base firmware: xc3028_init0.i2c.fw
Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw xc3028-tuner.c: firmware 2.7
ANALOG TV REQUEST
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Hauppauge WinTV HVR 950
usbcore: registered new driver em28xx
em28xx_audio: disagrees about version of symbol snd_pcm_new
em28xx_audio: Unknown symbol snd_pcm_new
em28xx_audio: disagrees about version of symbol snd_card_register
em28xx_audio: Unknown symbol snd_card_register
em28xx_audio: disagrees about version of symbol snd_card_free
em28xx_audio: Unknown symbol snd_card_free
em28xx_audio: disagrees about version of symbol snd_card_new
em28xx_audio: Unknown symbol snd_card_new
em28xx_audio: disagrees about version of symbol snd_pcm_lib_ioctl
em28xx_audio: Unknown symbol snd_pcm_lib_ioctl
em28xx_audio: disagrees about version of symbol snd_pcm_set_ops
em28xx_audio: Unknown symbol snd_pcm_set_ops
em28xx_audio: disagrees about version of symbol snd_pcm_hw_constraint_integer
em28xx_audio: Unknown symbol snd_pcm_hw_constraint_integer
em28xx_audio: disagrees about version of symbol snd_pcm_period_elapsed
em28xx_audio: Unknown symbol snd_pcm_period_elapsed em2880-dvb.c: DVB Init
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading default dtv settings: xc3028_DTV8_2633.i2c.fw xc3028-tuner.c: firmware 2.7
Sending extra call for Digital TV! /home/silentm/MessageNet/v4l-dvb-kernel-cd030297f684/v4l/xc3028-tuner.c:
attach request!
DVB: registering new adapter (em2880 DVB-T)
DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
Em28xx: Initialized (Em2880 DVB Extension) extension
[