2.6.27 gspca driver fails with Trust WB-1400T
Hi
i have a Trust 1400T perfectly working on 2.6.26 using external module (media-video/gspcav1-20071224 is the gentoo version so it's that day snapshot.)
Upgrading to 2.6.27 kernel, using integrated kernel driver
i get:
gspca: main v2.2.0
registered
usbcore: registered new interface driver
conex
conex:
registered
usbcore: registered new interface driver
etoms
etoms:
registered
usbcore: registered new interface driver
mars
mars:
registered
usbcore: registered new interface driver
ov519
ov519:
registered
usbcore: registered new interface driver
pac207
pac207:
registered
usbcore: registered new interface driver
pac7311
pac7311:
registered
usbcore: registered new interface driver
sonixb
sonixb:
registered
usbcore: registered new interface driver
sonixj
sonixj:
registered
usbcore: registered new interface driver
spca500
spca500:
registered
usbcore: registered new interface driver
spca501
spca501:
registered
usbcore: registered new interface driver
spca505
spca505:
registered
usbcore: registered new interface driver
spca506
spca506:
registered
usbcore: registered new interface driver
spca508
spca508:
registered
usbcore: registered new interface driver
spca561
spca561:
registered
usbcore: registered new interface driver
sunplus
sunplus:
registered
usbcore: registered new interface driver
stk014
stk014:
registered
usbcore: registered new interface driver
t613
t613:
registered
usbcore: registered new interface driver
tv8532
tv8532:
registered
usbcore: registered new interface driver
vc032x
vc032x:
registered
usbcore: registered new interface driver
zc3xx
zc3xx: registered
gspca: probing
093a:2468
pac207: Pixart Sensor ID 0x27 Chips ID0x08
pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2468)
gspca: probe ok
i have node device created, but picture is totally corrupted, with skype (sorry!) i have a green and black window,
with mplayer or kopete i have a black one, while before with old driver it was working perfectly.
Any hints?
lsusb
Bus 002 Device 002: ID 093a:2468 Pixart Imaging, Inc. Easy Snap Snake Eye WebCam
Here i read my device works, but it's not my case.
https://fedoraproject.org/wiki/Features/BetterWebcamSupport
i'm running a core2 in 64bit mode.
Please CC me i'm not subscribed
---
Patrizio Bassi
www.patriziobassi.it
man, 13 10 2008 kl. 22:19 +0200, skrev Patrizio Bassi:
Quoted 8 lines
Hi
i have a Trust 1400T perfectly working on 2.6.26 using external module (media-video/gspcav1-20071224 is the gentoo version so it's that day snapshot.)
Upgrading to 2.6.27 kernel, using integrated kernel driver
Does the following text explain it (imagine the text being at the front page of [2])?
"Historically, there has been a number of different projects ([1], ...), providing v4l drivers outside of the mainline Linux kernel. If you are migrating from drivers by such projects, you might need to know a few things. The drivers provided by this project do not do various color conversion routines in the kernel, but in a userspace library that we also provide [3].
This means that programs that use v4l and v4l2 must either be
- able to do the necessary color conversion themselves,
- link against our userspace library that provides these conversions, or
- be loaded using an appropriately set LD_PRELOAD environment variable."
[1] http://mxhaard.free.fr/
[2] http://linuxtv.org/v4lwiki/index.php/Main_Page
[3] http://linuxtv.org/hg/~hgoede/v4l-dvb
Simon Holm Thøgersen
2008/10/13 Simon Holm Thøgersen <[email protected]>>> man, 13 10 2008 kl. 22:19 +0200, skrev Patrizio Bassi:> > Hi> >> > i have a Trust 1400T perfectly working on 2.6.26 using external module> > (media-video/gspcav1-20071224 is the gentoo version so it's that day> > snapshot.)> >> > Upgrading to 2.6.27 kernel, using integrated kernel driver> >> Does the following text explain it (imagine the text being at the front> page of [2])?>> "Historically, there has been a number of different projects ([1], ...),> providing v4l drivers outside of the mainline Linux kernel. If you are> migrating from drivers by such projects, you might need to know a few> things. The drivers provided by this project do not do various color> conversion routines in the kernel, but in a userspace library that we> also provide [3].>> This means that programs that use v4l and v4l2 must either be> - able to do the necessary color conversion themselves,> - link against our userspace library that provides these> conversions, or> - be loaded using an appropriately set LD_PRELOAD environment> variable.">> [1] http://mxhaard.free.fr/> [2] http://linuxtv.org/v4lwiki/index.php/Main_Page> [3] http://linuxtv.org/hg/~hgoede/v4l-dvb>>> Simon Holm Thøgersen>
ok, it sounds i need to read some wikis...i'll come back to you wheni'm done with the result
--Patrizio Bassiwww.patriziobassi.it���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m����������?�I�
2008/10/14 Patrizio Bassi <[email protected]>>> 2008/10/13 Simon Holm Thøgersen <[email protected]>> >> > man, 13 10 2008 kl. 22:19 +0200, skrev Patrizio Bassi:> > > Hi> > >> > > i have a Trust 1400T perfectly working on 2.6.26 using external module> > > (media-video/gspcav1-20071224 is the gentoo version so it's that day> > > snapshot.)> > >> > > Upgrading to 2.6.27 kernel, using integrated kernel driver> > >> > Does the following text explain it (imagine the text being at the front> > page of [2])?> >> > "Historically, there has been a number of different projects ([1], ...),> > providing v4l drivers outside of the mainline Linux kernel. If you are> > migrating from drivers by such projects, you might need to know a few> > things. The drivers provided by this project do not do various color> > conversion routines in the kernel, but in a userspace library that we> > also provide [3].> >> > This means that programs that use v4l and v4l2 must either be> > - able to do the necessary color conversion themselves,> > - link against our userspace library that provides these> > conversions, or> > - be loaded using an appropriately set LD_PRELOAD environment> > variable."> >> > [1] http://mxhaard.free.fr/> > [2] http://linuxtv.org/v4lwiki/index.php/Main_Page> > [3] http://linuxtv.org/hg/~hgoede/v4l-dvb> >> >> > Simon Holm Thøgersen> >>> ok, it sounds i need to read some wikis...i'll come back to you when> i'm done with the result>
Hi Simon,
with the v4llib it looks much better, even if colors are not real as before.I think i need to tune it a little bit.
In the driver homepage it seems they suggest to continue using the olddriver with kernelspace decode for desktop or fast machines, butunfortunatly it doesn't even compile with 2.6.27. --Patrizio Bassiwww.patriziobassi.it���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m����������?�I�