Skip to contentSkip to conversation

updates for mgcoge, mgsuvd.

PATCH New Heiko Schocher 2 participants 2 messages Oct 15, 2008

lore
Share & tools
lore
#0 lore raw

v2 cover updates for mgcoge, mgsuvd.

The following patchseries updates the mgcoge
and mgsuvd board with new features:

- fixes some codingstyle issues
- add I2C support
- add LM75, EEprom support
- uses I2C Multibus feature
- add new I2C Bus command for adding new I2C
busses behind 1..n I2C mux(es).
- This Manufacturer uses a I2C deblocking
mechanism, which was developed with Atmel.
This patchseries introduce this as a
boardspecific deblocking algorithm. Maybe
it is good for a common deblocking mechanism?
- analyse some information contained in the
EEProm and saves this information in hush shell
variables.
- adds bootcount feature

Also I did a lot of rework of the patches, because my First post of this patchseries was not optimal.

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#1 lore raw

v2 cover updates for mgcoge, mgsuvd.

Dear Heiko Schocher,

Quoted 19 lines · In message <[email protected]> you wrote:

The following patchseries updates the mgcoge
and mgsuvd board with new features:

- fixes some codingstyle issues
- add I2C support
- add LM75, EEprom support
- uses I2C Multibus feature
- add new I2C Bus command for adding new I2C
busses behind 1..n I2C mux(es).
- This Manufacturer uses a I2C deblocking
mechanism, which was developed with Atmel.
This patchseries introduce this as a
boardspecific deblocking algorithm. Maybe
it is good for a common deblocking mechanism?
- analyse some information contained in the
EEProm and saves this information in hush shell
variables.
- adds bootcount feature

Quoted 4 lines

Also I did a lot of rework of the patches, because my First post of this patchseries was not optimal.

All patches applied to "next" branch.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I know engineers. They love to change things.             - Dr. McCoy