i2c: Fix help text for i2c reset command.
Signed-off-by Heiko Schocher <[email protected]>
---
This Patch fixes a typo in Patch:
http://lists.denx.de/pipermail/u-boot/2008-October/041807.html
[U-Boot] [PATCH v2 02/16] [PATCH] I2C: add new command i2c reset.
common/cmd_i2c.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
common/cmd_i2c.c +1 -1
@@ -1322,7 +1322,7 @@ U_BOOT_CMD("i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n" "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" "i2c probe - show devices on the I2C bus\n" -"i2c reset - reinit the I2C Controller\n" +"i2c reset - re-init the I2C Controller\n" "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"#if defined(CONFIG_CMD_SDRAM )"i2c sdram chip - print SDRAM configuration information\n"
Signature · 5 lines
1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Wolfgang Denk
AppliedDear Heiko Schocher,
Quoted 8 lines · In message <[email protected]> you wrote:
---
This Patch fixes a typo in Patch:
http://lists.denx.de/pipermail/u-boot/2008-October/041807.html
[U-Boot] [PATCH v2 02/16] [PATCH] I2C: add new command i2c reset.common/cmd_i2c.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
Applied to "next" branch - will merge this into the "I2C: add new command i2c reset." commit upon next rebase of this branch.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Honest error is to be pitied, not ridiculed.
-- Philip Earl of Chesterfield