Skip to contentSkip to conversation

SCSI reference

DISCUSSION Jonathan Nell 3 participants 3 messages Sep 1, 2009 SCSI

lore
Share & tools
lore
#0 lore raw

I'm new to this scsi stuff. Is there any good online reference where I can look up CDBs and the format of responses etc.
For e.g. I know that 0x43 is READ_TOC but I have no idea how to construct the CDB and what format to response is.

#1 lore raw

I'm new to this scsi stuff. Is there any good online reference where I can look up CDBs and the format of responses etc.
For e.g. I know that 0x43 is READ_TOC but I have no idea how to construct the CDB and what format to response is.

You should look into t10.org to get SAM SPC SBC specs first , All SCSI command
& response format could be found there , or you just look the kernel source in driver/scsi

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw

jack wang wrote:
[Jonathan Nell wrote]

Quoted 7 lines
Quoted 4 lines

I'm new to this scsi stuff. Is there any good online reference where I can look up CDBs and the format of responses etc.
For e.g. I know that 0x43 is READ_TOC but I have no idea how to construct the CDB and what format to response is.

You should look into t10.org to get SAM SPC SBC specs first , All SCSI command & response format could be found there

[...]

To add to that: If you are not quite satisfied with what you can find at http://www.t10.org/ftp/t10/drafts/ nowadays, have a look at http://web.archive.org/web/*/http://www.t10.org/ftp/t10/drafts/.

Signature · 3 lines
Stefan Richter
-=====-==--= =--= ----=
http://arcgraph.de/sr/