Skip to contentSkip to conversation

hifn_7955 and Linux

DISCUSSION Andreas Gerlich 2 participants 2 messages Oct 31, 2008 1 message not in the archive Crypto API

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hello,

I have following hardware:

net5501 - Board of Soekris with AMD GoedeLX Processor 500 MHz vpn1401 - PCI-Card with HIFN 7955 Crypto acceleration chip also
from Soekris.

I'am use Debian Lenny/sid on this board. It works fine.
I can also use the geode-aes engine for encryption partiions on the HD. But I can only use 128 bit keysize with this engine.

So I bougth the vpn1401 card with the HIFN 7955 Chip. I tought that this Chip is fully supported by the hifn_795x module which is included in the kernel 2.6.27 of Lenny/sid.
But it doesn't work. I get errors when I try tu use the AES-engine of the hifn_795x/Chip/Module.

Can you tell me what the parameters are nessesary for cryptsetup to use the hifn_7955?

I try with cryptsetup: aes-cbc-essiv:sha256, keysize=256 but that doesn't work.

Regards
Andreas Gerlich

Signature · 2 lines
Andreas Gerlich, University of Ulm, Germany
open source project --> http://yaze-ag.de/ (Yet Another Z80 Emulator)
#2 lore raw

Hi.

Quoted 5 lines · Andreas Gerlich

But it doesn't work. I get errors when I try tu use the AES-engine of the hifn_795x/Chip/Module.

Can you tell me what the parameters are nessesary for cryptsetup to use the hifn_7955?

Please show the dmesg output for the failed command and optionally (but very helpful) enable debug and send us its output.

Signature · 1 line
	Evgeniy Polyakov