Skip to contentSkip to conversation

AutoFS5 for 2.6.27.x?

DISCUSSION Carsten Aulbert 3 participants 7 messages Nov 3, 2008 – Nov 4, 2008 Kernel automounter

lore
Share & tools
lore
#0 lore raw

Hi all,

I'm reading/skimming this list for quite a bit of time, but somehow I lost track. In the mainline kernel 2.6.27.4 there seems to be only autofs4 not autofs5, right? At least I'm only seeing CONFIG_AUTOFS_FS and CONFIG_AUTOFS4_FS.

On the ftp server of kernel.org I found 5.0.3 patches from January, but that seems quite old to me. The golden question: Is this the correct tarball to use or is there some git repo were I should pull the patches
- and how?

Sorry if this question is dump :(

Cheers

Carsten

#1 lore raw
Quoted 11 lines · Carsten Aulbert

Hi all,

I'm reading/skimming this list for quite a bit of time, but somehow I lost track. In the mainline kernel 2.6.27.4 there seems to be only autofs4 not autofs5, right? At least I'm only seeing CONFIG_AUTOFS_FS and CONFIG_AUTOFS4_FS.

On the ftp server of kernel.org I found 5.0.3 patches from January, but that seems quite old to me. The golden question: Is this the correct tarball to use or is there some git repo were I should pull the patches
- and how?

The kernel module is named autofs4 for reasons I won't get into. The latest userspace package is autofs version 5. The autofs4 kernel modules speaks the autofs version 5 protocol.

In short, you want the autofs version 5 userspace packages.

Cheers,

Jeff

#2 lore raw

Hi Jeff,

Quoted 6 lines · Jeff Moyer

The kernel module is named autofs4 for reasons I won't get into. The latest userspace package is autofs version 5. The autofs4 kernel modules speaks the autofs version 5 protocol.

In short, you want the autofs version 5 userspace packages.

Ah thanks, I should pay closer attention to the list as this distinction slipped by.

Thanks!

Carsten

#3 lore raw
In reply to Jeff Moyer

Hi all

Quoted 5 lines · Jeff Moyer

The kernel module is named autofs4 for reasons I won't get into. The latest userspace package is autofs version 5. The autofs4 kernel modules speaks the autofs version 5 protocol.

In short, you want the autofs version 5 userspace packages.

Jumping up and down too early I guess:

I've userland autofs5 version 5.0.3 installed, the kernel 2.6.27.2 has AUTOFS4 set

$ zgrep AUTOFS /proc/config.gz
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y

and when starting autofs it complains about wrong kernel protocol version:

/etc/init.d/autofs restart
Stopping automount: done.
Starting automount: /usr/sbin/automount: kernel protocol version 5.00 or above required.
no valid automount entries defined.

auto.master only has a single line:
/atlas/data yp:auto.data --timeout=5

and ypcat yields:

$ ypcat auto.data
-fstype=nfs,nfsvers=3,hard,rsize=32768,wsize=32768,tcp,rw       &:/data/

Something's wrong here but I can't spot it.

Cheers

Carsten

#4 lore raw
Quoted 9 lines · Carsten Aulbert

Hi all

Quoted 5 lines · Jeff Moyer

The kernel module is named autofs4 for reasons I won't get into. The latest userspace package is autofs version 5. The autofs4 kernel modules speaks the autofs version 5 protocol.

In short, you want the autofs version 5 userspace packages.

Quoted 7 lines

Jumping up and down too early I guess:

I've userland autofs5 version 5.0.3 installed, the kernel 2.6.27.2 has AUTOFS4 set

$ zgrep AUTOFS /proc/config.gz
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y

Don't build them both into the kernel. Ian, we should see if there's a way to disallow that.

You want:

CONFIG_AUOTFS_FS=n
CONFIG_AUTOFS4_FS=m

Cheers,

Jeff

maintainer
#5 lore raw
Quoted 13 lines · Jeff Moyer
Quoted 11 lines · Carsten Aulbert

Hi all

Quoted 5 lines · Jeff Moyer

The kernel module is named autofs4 for reasons I won't get into. The latest userspace package is autofs version 5. The autofs4 kernel modules speaks the autofs version 5 protocol.

In short, you want the autofs version 5 userspace packages.

Jumping up and down too early I guess:

Quoted 8 lines
Quoted 5 lines

I've userland autofs5 version 5.0.3 installed, the kernel 2.6.27.2 has AUTOFS4 set

$ zgrep AUTOFS /proc/config.gz
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y

Don't build them both into the kernel. Ian, we should see if there's a way to disallow that.

Yeah, that does seem sensible these days.
Mmmm ... I've not really needed to do anything in the kernel build system before, so I'm not sure either!

Quoted 14 lines

You want:

CONFIG_AUOTFS_FS=n
CONFIG_AUTOFS4_FS=m

Cheers,

Jeff

_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs

maintainer
#6 lore raw
In reply to Carsten Aulbert
Quoted 6 lines · Carsten Aulbert

Hi all,

I'm reading/skimming this list for quite a bit of time, but somehow I lost track. In the mainline kernel 2.6.27.4 there seems to be only autofs4 not autofs5, right? At least I'm only seeing CONFIG_AUTOFS_FS and CONFIG_AUTOFS4_FS.

Like Jeff says, you need autofs4.

You should make sure that the autofs4 module is being loaded, not the autofs module. If your using a later init script it will explicitly load the module, but only if one isn't already present (so rmmod autofs before startup should make things work). Another way to prevent being caught is to "alias autofs autofs4" in your modules configuration (at least I think that's the order, it's been a while since we've had this problem reported).

Quoted 5 lines

On the ftp server of kernel.org I found 5.0.3 patches from January, but that seems quite old to me. The golden question: Is this the correct tarball to use or is there some git repo were I should pull the patches
- and how?

The version 5 patch series is located at:
http://www.kernel.org/pub/linux/daemons/autofs/v5.

See patch_order-5.0.3 also. The patch list is quite large.

The git repo is at:
git clone git://git.kernel.org/pub/scm/linux/storage/autofs/autofs.git

The kernel patches in the repo are usually not up to date but, as I'm wanting to release 5.0.4, they are at the moment.

Ian