SISUSB2VGA driver add 0x0711, 0x0903
Sorry, but since it was so an "easy" patch I thought it was not needed :P
I add some more information;
This adds a new device I bought some time ago from www.compatible.eu, but Its produced by Startech (www.startech.com).
Looking the device VID and PID it seems the normal evolution of the previous products supported by the linux driver sisusb2vga.
It permits to add an external display using a normal usb2 port to your computer. Up to 16 displays connected to the usb (in theory) with a maximum resolution of 1280x1024 and 32bits. The only problem is the lack of acceleration and the poor refresh rate, but it works quite well for mostly static display (for example your mail software). I've been using it for nearly a year without any problem using xinerama configuration on xorg.
I've had had also reports from some people using it without problems (see http://www.sidux.com/index.php?module=pnWikka&tag=usb2vga ).
For more information and pictures just have a look at; http://www.comerma.net/usb2vga_en.html
Albert
En/na Andrew Morton ha escrit:
Quoted 26 lines
Quoted 11 lines · On Tue, 04 Nov 2008 16:42:55 +0100 Albert Comerma <[email protected]> wrote:
After some comments (thanks a lot) I resend the patch, hoping now it reaches the adequate person.
Signed-off-by Albert Comerma <[email protected]>[sisusb.patch text/x-diff (565B)]
diff -r -ulinux-2.6.27.4/drivers/usb/misc/sisusbvga/sisusb.clinux-2.6.27.4-new/drivers/usb/misc/sisusbvga/sisusb.cdrivers/usb/misc/sisusbvga/sisusb.c line 3276
Quoted 7 lines
drivers/usb/misc/sisusbvga/sisusb.c +1
-0@@ -3270,6 +3270,7 @@ { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, { USB_DEVICE(0x0711, 0x0902) }, + { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) },Could we please have some description of this patch? What device are we supporting here? Manufacturer/model/etc? Something. Anything!
As this has come up. Has anyone had any luck with the version with vid and pid0x0711, 0x0914?
The good old add the id and cross your fingers fails with a Failed to early initialize device
message.
--
Jonathan
Quoted 58 lines
Sorry, but since it was so an "easy" patch I thought it was not needed :P I add some more information;
This adds a new device I bought some time ago from www.compatible.eu, but Its produced by Startech (www.startech.com).
Looking the device VID and PID it seems the normal evolution of the previous products supported by the linux driver sisusb2vga. It permits to add an external display using a normal usb2 port to your computer. Up to 16 displays connected to the usb (in theory) with a maximum resolution of 1280x1024 and 32bits. The only problem is the lack of acceleration and the poor refresh rate, but it works quite well for mostly static display (for example your mail software). I've been using it for nearly a year without any problem using xinerama configuration on xorg.
I've had had also reports from some people using it without problems (see http://www.sidux.com/index.php?module=pnWikka&tag=usb2vga ). For more information and pictures just have a look at;
http://www.comerma.net/usb2vga_en.htmlAlbert
En/na Andrew Morton ha escrit:
Quoted 30 lines
Quoted 15 lines · On Tue, 04 Nov 2008 16:42:55 +0100 Albert Comerma <[email protected]> wrote:
After some comments (thanks a lot) I resend the patch, hoping now it reaches the adequate person.
Signed-off-by Albert Comerma <[email protected]>[sisusb.patch text/x-diff (565B)]
diff -r -ulinux-2.6.27.4/drivers/usb/misc/sisusbvga/sisusb.clinux-2.6.27.4-new/drivers/usb/misc/sisusbvga/sisusb.c
---linux-2.6.27.4/drivers/usb/misc/sisusbvga/sisusb.c2008-10-26
00:05:07.000000000 +0200
+++linux-2.6.27.4-new/drivers/usb/misc/sisusbvga/sisusb.c2008-11-03 15:21:03.000000000 +0100Review line 3276
Quoted 7 lines
(quoted diff) +1
-0@@ -3270,6 +3270,7 @@ { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, { USB_DEVICE(0x0711, 0x0902) }, + { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) },Could we please have some description of this patch? What device are we supporting here? Manufacturer/model/etc? Something. Anything!
Signature · 5 lines
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/