powerpc: 83xx: add support for the 8360 based kmeter1 board.
v3 cover powerpc: 83xx: add support for the 8360 based kmeter1 board.
This patch series adds support for the keymile board kmeter1 based on a MPC8360 CPU from freescale.
The patches 1/4 - 2/4 are adding the basic support for this board. The patches 3/4 and 4/4 do some cleanups for the keymile boards.
changes since v2:
- [PATCH 1/4 v3] powerpc: net: support for the SMSC LAN8700 PHY added comments from Kim Philips
- [PATCH 2/5 v2] powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines aplied to "u-boot-mpc83xx master" -> no longer in this patch series
- [PATCH 2/4 v3] powerpc: 83xx: add support for the kmeter1 board added comments from Kim Philips
added doc/README.kmeter1
- [PATCH 3/4 v3] powerpc: keymile: Add a check for the PIGGY debug board added comments from Ben Warren
- [PATCH 4/4 v3] powerpc, keymile boards: extract identical config options just rebased
bye
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
v3 cover powerpc: 83xx: add support for the 8360 based kmeter1 board.
Quoted 11 lines · On Thu, 20 Nov 2008 09:56:25 +0100 Heiko Schocher <[email protected]> wrote:
This patch series adds support for the keymile board kmeter1 based on a MPC8360 CPU from freescale.
The patches 1/4 - 2/4 are adding the basic support for this board. The patches 3/4 and 4/4 do some cleanups for the keymile boards.
changes since v2:
- [PATCH 1/4 v3] powerpc: net: support for the SMSC LAN8700 PHY added comments from Kim Philips
applied 2, v4 of 3, and 4/4 to u-boot-mpc83xx.git next branch.
left 1/4 for Ben.
Thanks everyone,
Kim