Skip to contentSkip to conversation

Can I have a backup boot option ?

U-Boot Mark Jackson 2 participants 3 messages Nov 24, 2008

lore
Share & tools
lore
#0 lore raw

Our current system works fine (booting from flash or nfs), but I'd also like to add a "recovery" feature.

If an end-user inserts an MMC card containing some "magic marker" files, the target will detect these and boot from the MMC card instead of using the standard boot option.

For portability, I guess I could use the Hush option and construct some big if..else..fi statement to check for the MMC card files and boot accordingly. Is this a simple-ish task ?

An easier, but less portable, way would be to hard-code the checks in the startup code before the standard boot process.

I've done a quick check of the README and the source code, but nothing else seems to stand out as a possible solution.

Anyone got any ideas ?

Thanks
Mark

#1 lore raw

Dear Mark,

Quoted 2 lines · In message <[email protected]> you wrote:

If an end-user inserts an MMC card containing some "magic marker" files, the target will detect these and boot from the MMC card instead of using the standard boot option.

...

Quoted 1 line

I've done a quick check of the README and the source code, but nothing else seems to stand out as a possible solution.

Note: please restrict your line lenght to some 70 or so characters.

There are several auto-update / recovery solutions available in current source code. Just look around - search for file names that contain auto_update or fwupdate, and/or read doc/README.update

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Sorry, but my karma just ran over your dogma.
#2 lore raw
Quoted 8 lines · Wolfgang Denk

Dear Mark,

Quoted 1 line · In message <[email protected]> you wrote:

If an end-user inserts an MMC card containing some "magic marker" ...

...

Quoted 1 line

I've done a quick check of the README and the source code, but ...

Note: please restrict your line lenght to some 70 or so characters.

Hmmm ... I'm sure I'd already done that ... Thunderbird must have reset itself ??

Quoted 3 lines

There are several auto-update / recovery solutions available in current source code. Just look around - search for file names that contain auto_update or fwupdate, and/or read doc/README.update

Ah, excellent. Thanks for the pointers.

Quoted 4 lines

Best regards,

Wolfgang Denk