HVR-4000 need to switch 19/14V
Dear All,
I run a HVR 4000 in Hong Kong and try to make it run with ALIGA2 on a 'so called' cheap Sat in my rented flat. Problem:
When I run the scan <myaligaconfig> no result come out.
I double check with my dreambox - its working
different between dreambox<>HVR4000 dreambox set 19V on the LNB HVR only 17,8V.
I google around a bit and found a thread where someone set a extra bit in the registry (win32) to make the card set to 19/14V.
Can someone give me a hint which register affected here on the cx88??? code - to make it possible for me testing/patching.
thank you.
Chris
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 8 lines · Chris Ruehl
Dear All,
I run a HVR 4000 in Hong Kong and try to make it run with ALIGA2 on a 'so called' cheap Sat in my rented flat. Problem:
When I run the scan <myaligaconfig> no result come out.
I double check with my dreambox - its working
different between dreambox<>HVR4000 dreambox set 19V on the LNB HVR only 17,8V.
Quoted 9 lines
I google around a bit and found a thread where someone set a extra bit in the registry (win32) to make the card set to 19/14V.
Can someone give me a hint which register affected here on the cx88??? code - to make it possible for me testing/patching.
thank you.
Chris
BTW: The info I found while search the WWW.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HCW88BDA\Parameters] "LNBVoltage_Ctrl"=dword:00000005
; Bit 0: (+1) - disables dynamic current limiting
; Bit 1: (+2) - makes output voltage 13/18V instead of 14/19V ; Bit 2: (+4) - prevents LNB power from being disabled
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list