Skip to contentSkip to conversation

sata_svw breakage

DISCUSSION Alex Howells 2 participants 4 messages Dec 5, 2008

lore
Share & tools
lore
#0 lore raw

Afternoon Gents (and Ladies),

I'm setting an interesting problem with the sata_svw driver on a fairly new (in terms of model) blade server from HP, a BL495c.

[    3.462135] PCI: setting IRQ 14 as level-triggered
[    3.462142] sata_svw 0000:01:0e.0: PCI INT A -> Link[ISF0] -> GSI 14
(level,
low) -> IRQ 14
[    3.465367] sata_svw 0000:01:0e.0: PCI INT A disabled
[    3.467302] sata_svw: probe of 0000:01:0e.0 failed with error -16

Having trouble tracking down what 'error -16' might imply, any pointers for what the root cause may be and how to address it?

Regards,
Alex

#1 lore raw
Quoted 12 lines · Alex Howells

Afternoon Gents (and Ladies),

I'm setting an interesting problem with the sata_svw driver on a fairly new (in terms of model) blade server from HP, a BL495c.

[    3.462135] PCI: setting IRQ 14 as level-triggered
[    3.462142] sata_svw 0000:01:0e.0: PCI INT A -> Link[ISF0] -> GSI 14
(level,
low) -> IRQ 14
[    3.465367] sata_svw 0000:01:0e.0: PCI INT A disabled
[    3.467302] sata_svw: probe of 0000:01:0e.0 failed with error -16
Quoted 2 lines

Having trouble tracking down what 'error -16' might imply, any pointers for what the root cause may be and how to address it?

I should have noted this happens in the latest -stable and the problem appears to persist if I go back a couple of versions to 2.6.25, etc.

Kernel config is over at:

    http://havok.aeode.net/~ahowells/2.6.27.7-config

Cheers,
Alex

#2 lore raw
In reply to Alex Howells
Quoted 12 lines · Alex Howells

Afternoon Gents (and Ladies),

I'm setting an interesting problem with the sata_svw driver on a fairly new (in terms of model) blade server from HP, a BL495c.

[    3.462135] PCI: setting IRQ 14 as level-triggered
[    3.462142] sata_svw 0000:01:0e.0: PCI INT A -> Link[ISF0] -> GSI 14
(level,
low) -> IRQ 14
[    3.465367] sata_svw 0000:01:0e.0: PCI INT A disabled
[    3.467302] sata_svw: probe of 0000:01:0e.0 failed with error -16
Quoted 2 lines

Having trouble tracking down what 'error -16' might imply, any pointers for what the root cause may be and how to address it?

That's the EBUSY error (include/asm-generic/errno-base.h).

What kernel? I don't see a 'probe of ... failed' message in drivers/ata nor drivers/pci.

Jeff

#3 lore raw
Quoted 13 lines · Jeff Garzik
Quoted 12 lines · Alex Howells

Afternoon Gents (and Ladies),

I'm setting an interesting problem with the sata_svw driver on a fairly new (in terms of model) blade server from HP, a BL495c.

[    3.462135] PCI: setting IRQ 14 as level-triggered
[    3.462142] sata_svw 0000:01:0e.0: PCI INT A -> Link[ISF0] -> GSI 14
(level,
low) -> IRQ 14
[    3.465367] sata_svw 0000:01:0e.0: PCI INT A disabled
[    3.467302] sata_svw: probe of 0000:01:0e.0 failed with error -16
Quoted 7 lines
Quoted 2 lines

Having trouble tracking down what 'error -16' might imply, any pointers for what the root cause may be and how to address it?

That's the EBUSY error (include/asm-generic/errno-base.h).

What kernel? I don't see a 'probe of ... failed' message in drivers/ata nor drivers/pci.

It's running on 2.6.27.7 at the moment...