Skip to contentSkip to conversation

HVR4000 can't tune

DISCUSSION Chris Ruehl 1 participant 1 message Dec 8, 2008 Media (V4L/DVB)

lore
Share & tools
lore

Chris Ruehl

author
#0 lore raw

Hi all,

I still stuck in the problem that I can't tune to the
AGILA2 KU-Band sat using the HVR4000 - cx24116_load_firmware: FW version 1.22.82.0 .

I sure the Dish is working properly (have my Dreambox running on it and use the Frequencies where I got a good signal)

Someone any successions?

Thanx
Chris

my scan file:
#AGILA2
S 12501000 H 30002000 3/4

cx24116 log:

Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend: DVB-S delivery system selected
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_inversion(0)
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_fec(0x00,0x03)
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_lookup_fecmod(0x00,0x03)
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_fec() mask/val = 0x08/0x30
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_symbolrate(30002000)
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_symbolrate() symbol_rate = 30002000
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:   modulation  = 0
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:   frequency   = 1900000
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:   pilot       = 0 (val = 0x00)
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:   retune      = 1
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:   rolloff     = 0 (val = 0x02)
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:   symbol_rate = 30002000
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:   FEC         = 3 (mask/val = 0x08/0x30)
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:   Inversion   = 0 (val = 0x00)
Dec  8 17:34:26 vbox kernel: cx24116: cx24116_cmd_execute()

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list