Skip to contentSkip to conversation

some (MPC8313) Freescale patches not in latest kernel

DISCUSSION Norbert van Bolhuis 2 participants 2 messages Dec 10, 2008

lore
Share & tools
lore
#0 lore raw

I'm preparing the latest (2.6.28-rc7) linux kernel for an MPC8313 based project that's about to start.

Things seems to work great with the base 2.6.28-rc7 kernel. On our MPC8313E-RDB the kernel boots without problems, ethernet (with eTSEC2/eth1) works and even eTSEC1/eth0 has a 1gbit link. Most other peripherals seems to work as well, I never really tried them though.

However, the Freescale MPC8313 BSP (and http://www.bitshrine.org/gpp/) includes a few patches which I believe I need and/or are useful, for instance:
linux-fsl-2.6.23-MPC8313ERDB-ETSEC27-errata-workaround.patch linux-fsl-2.6.23-MPC8313ERDB-IEEE-1588.patch linux-fsl-2.6.23-GIANFAR_PARAMETER_ADJUST.patch linux-fsl-2.6.23-GIANFAR_SKB_BUFFER_RECYCLING_SUPPORT.patch linux-fsl-2.6.23-GIANFAR_SKB_BUFFER_RECYCLING_SUPPORT-2.patch

These patches are not in the latest (2.6.28-rc7) linux kernel nor in any of the powerpc devlopment trees
(e.g. git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git)
Of course users like me can simply check out the patches and apply them if needed for the project.
Before I do that I would just like to understand why they're not in. They're not MPC8313(-RDB) specific and they seem very useful to me.

Is it lack of time/importance ?

#1 lore raw
Quoted 25 lines · Norbert van Bolhuis

I'm preparing the latest (2.6.28-rc7) linux kernel for an MPC8313 based project that's about to start.

Things seems to work great with the base 2.6.28-rc7 kernel. On our MPC8313E-RDB the kernel boots without problems, ethernet (with eTSEC2/eth1) works and even eTSEC1/eth0 has a 1gbit link. Most other peripherals seems to work as well, I never really tried them though.

However, the Freescale MPC8313 BSP (and http://www.bitshrine.org/gpp/) includes a few patches which I believe I need and/or are useful, for instance:
linux-fsl-2.6.23-MPC8313ERDB-ETSEC27-errata-workaround.patch linux-fsl-2.6.23-MPC8313ERDB-IEEE-1588.patch linux-fsl-2.6.23-GIANFAR_PARAMETER_ADJUST.patch linux-fsl-2.6.23-GIANFAR_SKB_BUFFER_RECYCLING_SUPPORT.patch linux-fsl-2.6.23-GIANFAR_SKB_BUFFER_RECYCLING_SUPPORT-2.patch

These patches are not in the latest (2.6.28-rc7) linux kernel nor in any of the powerpc devlopment trees
(e.g. git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git)
Of course users like me can simply check out the patches and apply them if needed for the project.
Before I do that I would just like to understand why they're not in. They're not MPC8313(-RDB) specific and they seem very useful to me.

Quoted 1 line

Is it lack of time/importance ?

Simply put the reason is that some of these patches have never been posted to the open source for acceptance into the kernel. I would suggest requesting that of Freescale through whatever sales contact you have.

- k