Skip to contentSkip to conversation

DHCP/BOOP command behavior

U-Boot Brian S. Park 2 participants 2 messages Dec 19, 2008

lore
Share & tools
lore
#0 lore raw

Hi all,
I'm migrating from u-boot 1.0.0 to 1.3.4 and noticed that the behavior of bootp/dhcp command has changed.
In 1.0.0, bootp/dhcp would just get IP setting. But in 1.3.4, they try to download the boot image using tftp after acquiring the ip from the dhcp server. How can I make it behave the old way?

Thanks.

Brian

#1 lore raw

Make sure to set your autostart environment variable to no

example:

setenv autostart no
saveenv

Quoted 15 lines · Brian S. Park

Hi all,
I'm migrating from u-boot 1.0.0 to 1.3.4 and noticed that the behavior of bootp/dhcp command has changed.
In 1.0.0, bootp/dhcp would just get IP setting. But in 1.3.4, they try to download the boot image using tftp after acquiring the ip from the dhcp server. How can I make it behave the old way?

Thanks.

Brian
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot