Skip to contentSkip to conversation

avr32: lbipthread problem

Buildroot Bernhard Gödel 3 participants 3 messages Dec 23, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

I'm trying to build a toolchain based on uClibc for the AVR32. I'm using
buildroot-20081120 (as I had problems with binutils in newer
snapshots). I've configured threading support to NPTL, don't know whether the compile error below happens also with other configurations.

I'm experiencing the following issues:

1. The file tls.h is missing.
In order to overcome a problem with the missing tls.h I created an empty file named tls.h in /buildroot/toolchain_build_avr32/uClibc-0.9.29-avr32-2.1.5/include

2. __THROW undefined in pt-machine.h /libpthread/linuxthreads/sysdeps/avr32/pt-machine.h:16: error: expected ',' or ';' before '{' token

Reason for that was obviously that the __THROW definition was missing in this file. I simply defined it as blank in the same file because I didn't figure out where the original definition of this preprocessor macro is.

3. The file sysdep-cancel.h is missing
I created an empty file in /buildroot/toolchain_build_avr32/uClibc-0.9.29-avr32-2.1.5/libpthread/linuxthreads to overcome this problem.

4. finally I'm stuck with this one:
configure: error: Pthreads are required to build libgomp make[2]: *** [configure-target-libgomp] Error 1

Any suggestions are welcome :-)

Bernhard

#1 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Bernhard" == Bernhard G?del <[email protected]> writes:

Bernhard> Hi,
Bernhard> I'm trying to build a toolchain based on uClibc for the AVR32. I'm using
Bernhard> buildroot-20081120 (as I had problems with binutils in newer
Bernhard> snapshots). I've configured threading support to NPTL, don't know Bernhard> whether the compile error below happens also with other configurations.

Don't do that. I'm pretty sure avr32/uclibc 0.9.29 doesn't support NTPL.

Signature · 1 line
Bye, Peter Korsgaard
#2 lore raw

Correct, AVR32 does not support NPTL.

Sorry for top quoting, I'm on vacation and using MS Exchange web interface. Free beer to anybody telling me how to get a proper editor...

-----Opprinnelig melding-----
Fra: buildroot-bounces at busybox.net p? vegne av Peter Korsgaard
Sendt: ti 2008-12-23 16:18
Til: Bernhard G?del
Kopi: buildroot at uclibc.org
Emne: Re: [Buildroot] avr32: lbipthread problem

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Bernhard" == Bernhard G?del <[email protected]> writes:

Bernhard> Hi,
Bernhard> I'm trying to build a toolchain based on uClibc for the AVR32. I'm using
Bernhard> buildroot-20081120 (as I had problems with binutils in newer
Bernhard> snapshots). I've configured threading support to NPTL, don't know Bernhard> whether the compile error below happens also with other configurations.

Don't do that. I'm pretty sure avr32/uclibc 0.9.29 doesn't support NTPL.

Signature · 9 lines
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.busybox.net/pipermail/buildroot/attachments/20081223/8b490285/attachment.htm