S/PDIF-Out on Asus M3A-H/HDMI with ALC1200

Hi,

i am looking for a way to make Digital-Audio work with the external and internal S/PDIF-Output of my Motherboard Asus M3A-H/HDMI with ALC1200 Soundard. I use the latest unstable snapshot and i can´t make it work at the same time.

On the external S/PDIF-Output is my Digital Receiver connected, on the internal one my GeForce 8500GT to get sound over HDMI on my LCT-TV.

When i load the driver without any model-options my Soundcard is detected as Asus P5Q-EM HDMI

ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:2716:
hda_codec: model 'asus-p5q' is selected for config 1043:82fe (Asus P5Q-EM HDMI)

[ 6.721700] ALSA 
/usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
find slave Headphone Playback Volume, skipped
[ 6.721714] ALSA 
/usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
find slave Speaker Playback Volume, skipped
[ 6.721716] ALSA 
/usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
find slave Mono Playback Volume, skipped
[ 6.721719] ALSA 
/usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
find slave Line-Out Playback Volume, skipped
[ 6.721721] ALSA 
/usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
find slave PCM Playback Volume, skipped
[ 6.721729] ALSA 
/usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
find slave Speaker Playback Switch, skipped
[ 6.721731] ALSA 

/usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Mono Playback Switch, skipped

Now i have sound on my LCD-TV over HDMI (internal S/PDIF-Out)

When i load the driver with model=6stack-dig i have sound on my Digital-Receiver (external S/PDIF-Out).

In the mailinglist-archive or in the doku i have seen, that the only difference
between this models is the DIGOUT_NID

asus-p5q = 0x10
6stack-dig = 0x06

I there a way to get both output to work at the same time so i have sound on my LCD-TV and my Digital-Receiver ?

Regards

Thomas
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Hi,

here is the output from alsa-info.sh

http://www.alsa-project.org/db/?f=8282910dc807e1f141896886cd5f8fd574117000

I found another small mistake. In the Mixer my Soundcard is shown as "Realtek ALC888". When i switch this to lines in patch_realtek.c then it is shown as "Realtek ALC1200".

static struct hda_codec_preset snd_hda_preset_realtek[] = {
......

    { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 },
    { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
      .patch = patch_alc883 },

.....

Quoted 10 lines · Thomas Schneider

Hi,

here is the output from alsa-info.sh

http://www.alsa-project.org/db/?f=8282910dc807e1f141896886cd5f8fd574117000

I found another small mistake. In the Mixer my Soundcard is shown as "Realtek ALC888". When i switch this to lines in patch_realtek.c then it is shown as "Realtek ALC1200".

Quoted 8 lines

static struct hda_codec_preset snd_hda_preset_realtek[] = {
......

    { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 },
    { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
      .patch = patch_alc883 },

.....

Good catch!

Reversing the order should fix the name.

Thanks,
Fengguang
---
hda - fix name for ALC1200

Move the more specific preset for ALC1200 above the general one for ALC888, so that it will have the chance to get matched and selected.

Reported-by Thomas Schneider <[email protected]>

Signed-off-by Wu Fengguang <[email protected]>

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

sound/pci/hda/patch_realtek.c +1 -1

@@ -16638,9 +16638,9 @@ static struct hda_codec_preset snd_hda_p
 	  .patch = patch_alc882 }, /* should be patch_alc883() in future */
 	{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
 	{ .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc883 },
-	{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 },
 	{ .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
 	  .patch = patch_alc883 },
+	{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 },
 	{ .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc883 },
 	{} /* terminator */
 };

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel