2.6.28-git forcedeth dead interface and nvidia problems
2.6.28 works fine. 2.6.28-git1/3 only eth0 nVidia Corporation MCP55 Ethernet (rev a2) connected, using forcedeth driver, no light from the card/switch. Checking ifconfig and route -n says the network is correctly configured. In order to get the network back, I have to power off/on and boot up 2.6.28. It seems to leave a permanent condition, so a reboot to 2.6.28 does not get it working again.
Except for the additional config changes/options presented in 2.6.28-git, the kernels are configured the same, no network config changes made.
Using openSUSE 11.2 Alpha0 x86_64 dual-core 6000+.
JUST FOR INFORMATION, but I'd be surprised if the two problems aren't linked in some way.
=====================
The NVidia driver 180.18 works fine with 2.6.28, but fails with 2.6.28-git. The module builds and installs fine, Xorg.0.log says:- (II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(EE) NVIDIA(0): Failed to allocate video memory
(EE) NVIDIA(0): *** Aborting ***
Fatal server error:
AddScreen/ScreenInit failed for driver 0
Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Quoted 9 lines · Sid Boyce
The NVidia driver 180.18 works fine with 2.6.28, but fails with 2.6.28-git. The module builds and installs fine, Xorg.0.log says:- (II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(EE) NVIDIA(0): Failed to allocate video memory
(EE) NVIDIA(0): *** Aborting ***Fatal server error:
AddScreen/ScreenInit failed for driver 0
A posting on the NVidia forums indicates that booting with 'nopat' or building a kernel with CONFIG_X86_PAT=n works.
Quoted 9 lines · [email protected] wrote:
Quoted 7 lines · Sid Boyce
The NVidia driver 180.18 works fine with 2.6.28, but fails with 2.6.28-git. The module builds and installs fine, Xorg.0.log says:- (II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(EE) NVIDIA(0): Failed to allocate video memory
(EE) NVIDIA(0): *** Aborting ***
Quoted 5 lines
Quoted 2 lines
Fatal server error:
AddScreen/ScreenInit failed for driver 0A posting on the NVidia forums indicates that booting with 'nopat' or building a kernel with
CONFIG_X86_PAT=nworks.
Thanks, I verified that "nopat" works and I've rebuilt the kernel with CONFIG_X86_PAT=n waiting for a reboot.
Thanks and Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks