Skip to contentSkip to conversation

new (common) WARNING message?

DISCUSSION Mike Travis 3 participants 4 messages Jan 16, 2009

lore
Share & tools
lore
#0 lore raw

Hi Thomas,

I've been seeing these on and off for a while now. They don't seem to affect anything but perhaps I should track them down?

Do you know what it means? (I'm asking you because evidently debugobjects.c is from you? I read the good explanation in the changelog of 3ac7fe5a, but it didn't clue me into what's going on. ;-)

Thanks,
Mike
--

[ 1294.973592] ODEBUG: object is on stack, but not annotated
[ 1294.974067] ------------[ cut here ]------------
[ 1294.974067] WARNING: at /mdata/lwork/polaris3/travis/workareas/ingo-latest/linux-2.6-for-ingo/lib/debugobjects.c:253 __debug_object_init+0x27c/0x2f0()
[ 1294.974067] Hardware name: X7DBT
[ 1294.974067] Pid: 4150, comm: offline-test Tainted: G        W  2.6.29-rc1-4k-defconfig.01151634-00255-gc99dbbe-dirty #89
[ 1294.974067] Call Trace:
[ 1294.974067]  [<ffffffff81047e3f>] warn_slowpath+0xd3/0xf2
[ 1294.974067]  [<ffffffff8106c64f>] ? trace_hardirqs_off+0xd/0xf
[ 1294.974067]  [<ffffffff815ca6ac>] ? _spin_unlock_irqrestore+0x3d/0x4c
[ 1294.974067]  [<ffffffff8125bebe>] ? __debug_check_no_obj_freed+0xf6/0x14c
[ 1294.974067]  [<ffffffff81048d3c>] ? printk+0x6c/0x6e
[ 1294.974067]  [<ffffffff8125c449>] ? __debug_object_init+0xf9/0x2f0
[ 1294.974067]  [<ffffffff8125b3ae>] ? _raw_spin_unlock+0xc7/0xf6
[ 1294.974067]  [<ffffffff8125c5cc>] __debug_object_init+0x27c/0x2f0
[ 1294.974067]  [<ffffffff8125c66d>] debug_object_init+0x14/0x17
[ 1294.974067]  [<ffffffff81052320>] init_timer+0x1d/0x2a
[ 1294.974067]  [<ffffffff81025077>] hpet_cpuhp_notify+0xad/0x124
[ 1294.974067]  [<ffffffff81025233>] ? hpet_work+0x0/0x21a
[ 1294.974067]  [<ffffffff81062057>] notifier_call_chain+0x33/0x5b
[ 1294.974067]  [<ffffffff810620ad>] __raw_notifier_call_chain+0xe/0x10
[ 1294.974067]  [<ffffffff810620c3>] raw_notifier_call_chain+0x14/0x16
[ 1294.974067]  [<ffffffff815c5190>] _cpu_up+0x115/0x155
[ 1294.974067]  [<ffffffff815c527c>] cpu_up+0x65/0x73
[ 1294.974067]  [<ffffffff815ac21d>] store_online+0x52/0x7b
[ 1294.974067]  [<ffffffff812ff775>] sysdev_store+0x20/0x22
[ 1294.974067]  [<ffffffff81134f6b>] sysfs_write_file+0xe9/0x11e
[ 1294.974067]  [<ffffffff810e0da5>] vfs_write+0xea/0x148
[ 1294.974067]  [<ffffffff810e0ec7>] sys_write+0x4c/0x72
[ 1294.974067]  [<ffffffff8100c6cb>] system_call_fastpath+0x16/0x1b
[ 1294.974067] ---[ end trace 4eaa2a86a8e2da24 ]---
#1 lore raw
Quoted 42 lines · Mike Travis

I've been seeing these on and off for a while now. They don't seem to affect anything but perhaps I should track them down?

Do you know what it means? (I'm asking you because evidently debugobjects.c is from you? I read the good explanation in the changelog of 3ac7fe5a, but it didn't clue me into what's going on. ;-)

Thanks,
Mike
--

[ 1294.973592] ODEBUG: object is on stack, but not annotated
[ 1294.974067] ------------[ cut here ]------------
[ 1294.974067] WARNING: at /mdata/lwork/polaris3/travis/workareas/ingo-latest/linux-2.6-for-ingo/lib/debugobjects.c:253 __debug_object_init+0x27c/0x2f0()
[ 1294.974067] Hardware name: X7DBT
[ 1294.974067] Pid: 4150, comm: offline-test Tainted: G        W  2.6.29-rc1-4k-defconfig.01151634-00255-gc99dbbe-dirty #89
[ 1294.974067] Call Trace:
[ 1294.974067]  [<ffffffff81047e3f>] warn_slowpath+0xd3/0xf2
[ 1294.974067]  [<ffffffff8106c64f>] ? trace_hardirqs_off+0xd/0xf
[ 1294.974067]  [<ffffffff815ca6ac>] ? _spin_unlock_irqrestore+0x3d/0x4c
[ 1294.974067]  [<ffffffff8125bebe>] ? __debug_check_no_obj_freed+0xf6/0x14c
[ 1294.974067]  [<ffffffff81048d3c>] ? printk+0x6c/0x6e
[ 1294.974067]  [<ffffffff8125c449>] ? __debug_object_init+0xf9/0x2f0
[ 1294.974067]  [<ffffffff8125b3ae>] ? _raw_spin_unlock+0xc7/0xf6
[ 1294.974067]  [<ffffffff8125c5cc>] __debug_object_init+0x27c/0x2f0
[ 1294.974067]  [<ffffffff8125c66d>] debug_object_init+0x14/0x17
[ 1294.974067]  [<ffffffff81052320>] init_timer+0x1d/0x2a
[ 1294.974067]  [<ffffffff81025077>] hpet_cpuhp_notify+0xad/0x124
[ 1294.974067]  [<ffffffff81025233>] ? hpet_work+0x0/0x21a
[ 1294.974067]  [<ffffffff81062057>] notifier_call_chain+0x33/0x5b
[ 1294.974067]  [<ffffffff810620ad>] __raw_notifier_call_chain+0xe/0x10
[ 1294.974067]  [<ffffffff810620c3>] raw_notifier_call_chain+0x14/0x16
[ 1294.974067]  [<ffffffff815c5190>] _cpu_up+0x115/0x155
[ 1294.974067]  [<ffffffff815c527c>] cpu_up+0x65/0x73
[ 1294.974067]  [<ffffffff815ac21d>] store_online+0x52/0x7b
[ 1294.974067]  [<ffffffff812ff775>] sysdev_store+0x20/0x22
[ 1294.974067]  [<ffffffff81134f6b>] sysfs_write_file+0xe9/0x11e
[ 1294.974067]  [<ffffffff810e0da5>] vfs_write+0xea/0x148
[ 1294.974067]  [<ffffffff810e0ec7>] sys_write+0x4c/0x72
[ 1294.974067]  [<ffffffff8100c6cb>] system_call_fastpath+0x16/0x1b
[ 1294.974067] ---[ end trace 4eaa2a86a8e2da24 ]---
Quoted 1 line

--

The warning tells us that arch/x86/kernel/hpet.c::hpet_cpuhp_notify() allocates a timer on the stack. In particular, it allocates a struct hpet_work_struct on the stack which incorporates a timer.

Now, a timer instance on a stack would be wrong if the function which defined that timer exits too early. But in case of hpet_cpuhp_notify(), this is OK since
- it waits for the work be done,
- the work does not rearm itself.
IOW the work and thus the timer won't be accessed anymore when hpet_cpuhp_notify() returns.

So, hpet_cpuhp_notify() apparently needs a variant of INIT_DELAYED_WORK which uses init_timer_on_stack instead of init_timer, to say "trust me, I know what I'm doing".

Signature · 3 lines
Stefan Richter
-=====-==--= ---= =----
http://arcgraph.de/sr/
#2 lore raw
Quoted 57 lines · Stefan Richter
Quoted 42 lines · Mike Travis

I've been seeing these on and off for a while now. They don't seem to affect anything but perhaps I should track them down?

Do you know what it means? (I'm asking you because evidently debugobjects.c is from you? I read the good explanation in the changelog of 3ac7fe5a, but it didn't clue me into what's going on. ;-)

Thanks,
Mike
--

[ 1294.973592] ODEBUG: object is on stack, but not annotated
[ 1294.974067] ------------[ cut here ]------------
[ 1294.974067] WARNING: at /mdata/lwork/polaris3/travis/workareas/ingo-latest/linux-2.6-for-ingo/lib/debugobjects.c:253 __debug_object_init+0x27c/0x2f0()
[ 1294.974067] Hardware name: X7DBT
[ 1294.974067] Pid: 4150, comm: offline-test Tainted: G        W  2.6.29-rc1-4k-defconfig.01151634-00255-gc99dbbe-dirty #89
[ 1294.974067] Call Trace:
[ 1294.974067]  [<ffffffff81047e3f>] warn_slowpath+0xd3/0xf2
[ 1294.974067]  [<ffffffff8106c64f>] ? trace_hardirqs_off+0xd/0xf
[ 1294.974067]  [<ffffffff815ca6ac>] ? _spin_unlock_irqrestore+0x3d/0x4c
[ 1294.974067]  [<ffffffff8125bebe>] ? __debug_check_no_obj_freed+0xf6/0x14c
[ 1294.974067]  [<ffffffff81048d3c>] ? printk+0x6c/0x6e
[ 1294.974067]  [<ffffffff8125c449>] ? __debug_object_init+0xf9/0x2f0
[ 1294.974067]  [<ffffffff8125b3ae>] ? _raw_spin_unlock+0xc7/0xf6
[ 1294.974067]  [<ffffffff8125c5cc>] __debug_object_init+0x27c/0x2f0
[ 1294.974067]  [<ffffffff8125c66d>] debug_object_init+0x14/0x17
[ 1294.974067]  [<ffffffff81052320>] init_timer+0x1d/0x2a
[ 1294.974067]  [<ffffffff81025077>] hpet_cpuhp_notify+0xad/0x124
[ 1294.974067]  [<ffffffff81025233>] ? hpet_work+0x0/0x21a
[ 1294.974067]  [<ffffffff81062057>] notifier_call_chain+0x33/0x5b
[ 1294.974067]  [<ffffffff810620ad>] __raw_notifier_call_chain+0xe/0x10
[ 1294.974067]  [<ffffffff810620c3>] raw_notifier_call_chain+0x14/0x16
[ 1294.974067]  [<ffffffff815c5190>] _cpu_up+0x115/0x155
[ 1294.974067]  [<ffffffff815c527c>] cpu_up+0x65/0x73
[ 1294.974067]  [<ffffffff815ac21d>] store_online+0x52/0x7b
[ 1294.974067]  [<ffffffff812ff775>] sysdev_store+0x20/0x22
[ 1294.974067]  [<ffffffff81134f6b>] sysfs_write_file+0xe9/0x11e
[ 1294.974067]  [<ffffffff810e0da5>] vfs_write+0xea/0x148
[ 1294.974067]  [<ffffffff810e0ec7>] sys_write+0x4c/0x72
[ 1294.974067]  [<ffffffff8100c6cb>] system_call_fastpath+0x16/0x1b
[ 1294.974067] ---[ end trace 4eaa2a86a8e2da24 ]---
Quoted 1 line

--

The warning tells us that arch/x86/kernel/hpet.c::hpet_cpuhp_notify() allocates a timer on the stack. In particular, it allocates a struct hpet_work_struct on the stack which incorporates a timer.

Now, a timer instance on a stack would be wrong if the function which defined that timer exits too early. But in case of hpet_cpuhp_notify(), this is OK since
- it waits for the work be done,
- the work does not rearm itself.
IOW the work and thus the timer won't be accessed anymore when hpet_cpuhp_notify() returns.

Quoted 3 lines

So, hpet_cpuhp_notify() apparently needs a variant of INIT_DELAYED_WORK which uses init_timer_on_stack instead of init_timer, to say "trust me, I know what I'm doing".

that's already fixed in tip/timers/urgent and queued up for Linus:

6d612b0: locking, hpet: annotate false positive warning

Ingo

#3 lore raw
In reply to Stefan Richter
Quoted 57 lines · Stefan Richter
Quoted 42 lines · Mike Travis

I've been seeing these on and off for a while now. They don't seem to affect anything but perhaps I should track them down?

Do you know what it means? (I'm asking you because evidently debugobjects.c is from you? I read the good explanation in the changelog of 3ac7fe5a, but it didn't clue me into what's going on. ;-)

Thanks,
Mike
--

[ 1294.973592] ODEBUG: object is on stack, but not annotated
[ 1294.974067] ------------[ cut here ]------------
[ 1294.974067] WARNING: at /mdata/lwork/polaris3/travis/workareas/ingo-latest/linux-2.6-for-ingo/lib/debugobjects.c:253 __debug_object_init+0x27c/0x2f0()
[ 1294.974067] Hardware name: X7DBT
[ 1294.974067] Pid: 4150, comm: offline-test Tainted: G        W  2.6.29-rc1-4k-defconfig.01151634-00255-gc99dbbe-dirty #89
[ 1294.974067] Call Trace:
[ 1294.974067]  [<ffffffff81047e3f>] warn_slowpath+0xd3/0xf2
[ 1294.974067]  [<ffffffff8106c64f>] ? trace_hardirqs_off+0xd/0xf
[ 1294.974067]  [<ffffffff815ca6ac>] ? _spin_unlock_irqrestore+0x3d/0x4c
[ 1294.974067]  [<ffffffff8125bebe>] ? __debug_check_no_obj_freed+0xf6/0x14c
[ 1294.974067]  [<ffffffff81048d3c>] ? printk+0x6c/0x6e
[ 1294.974067]  [<ffffffff8125c449>] ? __debug_object_init+0xf9/0x2f0
[ 1294.974067]  [<ffffffff8125b3ae>] ? _raw_spin_unlock+0xc7/0xf6
[ 1294.974067]  [<ffffffff8125c5cc>] __debug_object_init+0x27c/0x2f0
[ 1294.974067]  [<ffffffff8125c66d>] debug_object_init+0x14/0x17
[ 1294.974067]  [<ffffffff81052320>] init_timer+0x1d/0x2a
[ 1294.974067]  [<ffffffff81025077>] hpet_cpuhp_notify+0xad/0x124
[ 1294.974067]  [<ffffffff81025233>] ? hpet_work+0x0/0x21a
[ 1294.974067]  [<ffffffff81062057>] notifier_call_chain+0x33/0x5b
[ 1294.974067]  [<ffffffff810620ad>] __raw_notifier_call_chain+0xe/0x10
[ 1294.974067]  [<ffffffff810620c3>] raw_notifier_call_chain+0x14/0x16
[ 1294.974067]  [<ffffffff815c5190>] _cpu_up+0x115/0x155
[ 1294.974067]  [<ffffffff815c527c>] cpu_up+0x65/0x73
[ 1294.974067]  [<ffffffff815ac21d>] store_online+0x52/0x7b
[ 1294.974067]  [<ffffffff812ff775>] sysdev_store+0x20/0x22
[ 1294.974067]  [<ffffffff81134f6b>] sysfs_write_file+0xe9/0x11e
[ 1294.974067]  [<ffffffff810e0da5>] vfs_write+0xea/0x148
[ 1294.974067]  [<ffffffff810e0ec7>] sys_write+0x4c/0x72
[ 1294.974067]  [<ffffffff8100c6cb>] system_call_fastpath+0x16/0x1b
[ 1294.974067] ---[ end trace 4eaa2a86a8e2da24 ]---
Quoted 1 line

--

The warning tells us that arch/x86/kernel/hpet.c::hpet_cpuhp_notify() allocates a timer on the stack. In particular, it allocates a struct hpet_work_struct on the stack which incorporates a timer.

Now, a timer instance on a stack would be wrong if the function which defined that timer exits too early. But in case of hpet_cpuhp_notify(), this is OK since
- it waits for the work be done,
- the work does not rearm itself.
IOW the work and thus the timer won't be accessed anymore when hpet_cpuhp_notify() returns.

Quoted 3 lines

So, hpet_cpuhp_notify() apparently needs a variant of INIT_DELAYED_WORK which uses init_timer_on_stack instead of init_timer, to say "trust me, I know what I'm doing".

Hi Stefan,

Thanks for the great explanation!

Cheers,
Mike