Skip to contentSkip to conversation

ads7846: Pin change interrupt support

PATCH New Michael Roth 1 participant 1 message Jan 17, 2009 Input drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ads7846: Pin change interrupt support

Some SoC supports only pin change interrupts on GPIO pins used as irq lines.

The ads7846 core is not affected from the additional irqs on the rising edge because the code accounts touch bounce anyway by kicking in a timer and disabling the irq after the first request and reenabling the irq after a timeout when there is no longer pen down detected.

---

drivers/input/touchscreen/ads7846.c 2009-01-17 00:40:15.000000000 +0100 renamed from drivers/input/touchscreen/ads7846.c 2008-12-25 00:26:37.000000000 +0100 +8 -3
diff -ur linux-2.6.28/drivers/input/touchscreen/ads7846.c linux-2.6.28-work/drivers/input/touchscreen/ads7846.c
@@ -1131,9 +1131,14 @@
 
        if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
                        spi->dev.driver->name, ts)) {
-               dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
-               err = -EBUSY;
-               goto err_free_gpio;
+               dev_info(&spi->dev, "trying pin change workaround on irq %d\n", spi->irq);
+               if (request_irq(spi->irq, ads7846_irq,
+                               IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+                               spi->dev.driver->name, ts)) {
+                       dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
+                       err = -EBUSY;
+                       goto err_free_gpio;
+               }
        }
 
        err = ads784x_hwmon_register(spi, ts);