Skip to contentSkip to conversation

MPIC Timers as clocksource

DISCUSSION Régis Odeyé 2 participants 4 messages Jan 28, 2009

lore
Share & tools
lore
#0 lore raw

Hi everybody,
Is there anyone who implemented a clocksource driver (drivers/clocksource) to deal with the MPIC timers especially with 86xx and 85xx soc's ? Regards.

Signature · 6 lines
Régis ODEYE

Kontron Modular Computers SA
150, rue M. Berthelot / ZI Toulon Est / BP 244 / Fr 83078 TOULON Cedex 9
Phone: (33) 4 98 16 34 86           Fax: (33) 4 98 16 34 01
E-mail: [email protected]  Web : www.kontron.com
#1 lore raw
Quoted 7 lines · On Jan 28, 2009, at 8:38 AM, R=E9gis Odey=E9 wrote:

Hi everybody,
Is there anyone who implemented a clocksource driver (drivers/=20 clocksource) to deal with the MPIC timers especially with 86xx and =20 85xx soc's ?
Regards.

--=20

We have some code for using the timers but not as a clocksource.. Out =20=

of interest why do want this?

- k=

#2 lore raw
Quoted 7 lines · Kumar Gala
Quoted 4 lines · Régis Odeyé

Hi everybody,
Is there anyone who implemented a clocksource driver (drivers/clocksource) to deal with the MPIC timers especially with 86xx and 85xx soc's ? Regards.

Quoted 5 lines
Quoted 1 line

--

We have some code for using the timers but not as a clocksource.. Out of interest why do want this?

- k

We have a plan to use an external clock signal to drive those timers. This signal is common with other boards in a same enclosure so we could synchronize our boards with those timers. Could you point me out to the related code even if there is some adaptations to get a clocksource driver.
Regards.

Signature · 6 lines
Régis ODEYE

Kontron Modular Computers SA
150, rue M. Berthelot / ZI Toulon Est / BP 244 / Fr 83078 TOULON Cedex 9
Phone: (33) 4 98 16 34 86           Fax: (33) 4 98 16 34 01
E-mail: [email protected]  Web : www.kontron.com
#3 lore raw
Quoted 16 lines · On Jan 28, 2009, at 12:14 PM, R=E9gis Odey=E9 wrote:
Quoted 15 lines · Kumar Gala
Quoted 8 lines · On Jan 28, 2009, at 8:38 AM, R=E9gis Odey=E9 wrote:

Hi everybody,
Is there anyone who implemented a clocksource driver (drivers/=20 clocksource) to deal with the MPIC timers especially with 86xx and =20=

85xx soc's ?
Regards.

--

We have some code for using the timers but not as a clocksource.. =20 Out of interest why do want this?

Quoted 7 lines
Quoted 1 line

- k

We have a plan to use an external clock signal to drive those =20 timers. This signal is common with other boards in a same enclosure =20=

so we could synchronize our boards with those timers. Could you point me out to the related code even if there is some =20 adaptations to get a clocksource driver.

I'll post some code.

As for clocksource.. last time I looked at that it was more about =20 using a timer as the single kernel reference clock.

- k=