PowerPC: MPC85xx: TQM85xx: add i2c device nodes for LM75
Subsystems (2)
PATCH 1/1 PowerPC: MPC85xx: TQM85xx: add i2c device nodes for LM75
Automatic I2C device probing is not done any more. Therefore we need proper DTS device node definitions for the I2C LM75 thermal sensor on the TQM85xx modules.
Signed-off-by Wolfgang Grandegger <[email protected]>
--- arch/powerpc/boot/dts/tqm8540.dts | 5 +++++ arch/powerpc/boot/dts/tqm8541.dts | 5 +++++ arch/powerpc/boot/dts/tqm8548-bigflash.dts | 5 +++++ arch/powerpc/boot/dts/tqm8548.dts | 5 +++++ arch/powerpc/boot/dts/tqm8555.dts | 5 +++++ arch/powerpc/boot/dts/tqm8560.dts | 5 +++++ 6 files changed, 30 insertions(+)
arch/powerpc/boot/dts/tqm8548.dts +5 -0
@@ -85,6 +85,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>;
arch/powerpc/boot/dts/tqm8540.dts +5 -0
@@ -84,6 +84,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>;
arch/powerpc/boot/dts/tqm8541.dts +5 -0
@@ -83,6 +83,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>;
arch/powerpc/boot/dts/tqm8548-bigflash.dts +5 -0
@@ -85,6 +85,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>;
arch/powerpc/boot/dts/tqm8555.dts +5 -0
@@ -83,6 +83,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>;
arch/powerpc/boot/dts/tqm8560.dts +5 -0
@@ -85,6 +85,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>;
Kumar Gala
AppliedQuoted 5 lines · Wolfgang Grandegger
Automatic I2C device probing is not done any more. Therefore we need proper DTS device node definitions for the I2C LM75 thermal sensor on the TQM85xx modules.
Signed-off-by Wolfgang Grandegger <[email protected]>
Quoted 8 lines
---
arch/powerpc/boot/dts/tqm8540.dts | 5 +++++ arch/powerpc/boot/dts/tqm8541.dts | 5 +++++ arch/powerpc/boot/dts/tqm8548-bigflash.dts | 5 +++++ arch/powerpc/boot/dts/tqm8548.dts | 5 +++++ arch/powerpc/boot/dts/tqm8555.dts | 5 +++++ arch/powerpc/boot/dts/tqm8560.dts | 5 +++++ 6 files changed, 30 insertions(+)
applied to next
- k