support the Pentium M (Dothan) boot on U-boot?
I will development the embedded system based on Intel Pentium M (Dothan). On U-boot x86, it is support the pentium M (Dothan) CPU?
Hi Yongda,
Quoted 2 lines · Yongda Shin
I will development the embedded system based on Intel Pentium M (Dothan). On U-boot x86, it is support the pentium M (Dothan) CPU?
U-Boot has generic x86 (486+) so there is no reason why it would not work on a Pentium M CPU. I don't know if the Dothan has hyperthreading or dual core, but the x86 port of U-Boot does not include multiple CPU support. I doubt this will be a problem though, it will just use the first core
Quoted 6 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Yongda Shin,
Quoted 2 lines · In message <[email protected]> you wrote:
I will development the embedded system based on Intel Pentium M (Dothan). On U-boot x86, it is support the pentium M (Dothan) CPU?
Not yet, you have a lot of work in front of you when you attempt such a port.
Good luck!
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "He was so narrow minded he could see through a keyhole with both eyes ..."