Skip to contentSkip to conversation

cfi: make flash_get_info() non static

U-Boot Applied Heiko Schocher 2 participants 2 messages Feb 10, 2009 – Feb 11, 2009 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

If on your board is more than one flash, you must know the size of every single flash, for example, for updating the DTS before booting Linux. So make this function flash_get_info() extern, and you can have all info about your flashes.

---
 drivers/mtd/cfi_flash.c |    2 +-
 include/flash.h         |    3 +++
 2 files changed, 4 insertions(+), 1 deletions(-)
drivers/mtd/cfi_flash.c +1 -1
index 84ff7e8..16e1429 100644
@@ -273,7 +273,7 @@ u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64")));
 /*-----------------------------------------------------------------------
  */
 #if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
-static flash_info_t *flash_get_info(ulong base)
+flash_info_t *flash_get_info(ulong base)
 {
 	int i;
 	flash_info_t * info = 0;
include/flash.h +3 -0
index 6e2981c..7f4b466 100644
@@ -124,6 +124,9 @@ extern int jedec_flash_match(flash_info_t *info, ulong base);
 #define CFI_CMDSET_AMD_LEGACY		0xFFF0
 #endif
 
+#if defined(CONFIG_SYS_FLASH_CFI)
+extern flash_info_t *flash_get_info(ulong base);
+#endif
 
 /*-----------------------------------------------------------------------
  * return codes from flash_write():
Signature · 5 lines
1.6.0.6

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Applied
#1 lore raw
Quoted 7 lines · Heiko Schocher

If on your board is more than one flash, you must know the size of every single flash, for example, for updating the DTS before booting Linux. So make this function flash_get_info() extern, and you can have all info about your flashes.

Applied to cfi-flash/master. Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================