Skip to contentSkip to conversation

SkyStar2 not able to tune in 2.6.29 (2.6.27.12 works)

linux-dvb Felix Kaechele 2 participants 2 messages Feb 16, 2009 – Feb 17, 2009 1 message not in the archive Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi there!

I've recently installed Fedora 11 (Rawhide) on my VDR machine. However my SkyStar2 (Rev 2.6B) is unable to sucessfully gain lock on any of the channels I choose. When I start the machine with the stock Fedora 10 2.6.27.12 kernel everything works out as expected.

Is this a known bug?
Please help me by telling me which information you need to further investigate.

Thank you,
Felix

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

Dear Felix Kaechele

I'm usinf SkyStar2 Revisions 2.3, 2.6 and 2.8 all togheter on SuSE 11.1 and no problem found. please send me your kernel mesages. (kernel messages can be obtained using dmesg command)

2009/2/17 Felix Kaechele <[email protected]>

Quoted 12 lines

Hi there!

I've recently installed Fedora 11 (Rawhide) on my VDR machine. However my SkyStar2 (Rev 2.6B) is unable to sucessfully gain lock on any of the channels I choose. When I start the machine with the stock Fedora 10 2.6.27.12 kernel everything works out as expected.

Is this a known bug?
Please help me by telling me which information you need to further investigate.

Quoted 8 lines

Thank you,
Felix

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

--
Best Regards
Mehran

Softnhard = Software & Hardware expert

Signature · 4 lines
Best Regards
Mehran

Softnhard = Software & Hardware expert