Skip to contentSkip to conversation

>2.6.27 dies at cardbus init on laptop

BUG David Pflug 2 participants 2 messages Feb 17, 2009 – Feb 19, 2009 ACPI

lore
Share & tools
lore
#0 lore raw

While trying to boot kernels greater than 2.6.27 on this Toshiba Satellite 1135-S155, it freezes while initializing Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50]. However, it boots with pci=noacpi. The IRQ of the cardbus is shared by one of the USB controllers and the IDE controller.

Identical symptoms on 2.6.29rc5.

Last few messages with default kernel line:
pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x0000004bffffff
pci 0000:02:02.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11

dmesg with acpi=off:
http://dpaste.com/hold/121766/

Kernel config:
http://dpaste.com/hold/121721/

lspci output:
http://dpaste.com/hold/121768/

Is there anything else I can do to help debug?

--
David Pflug

#1 lore raw

(cc linux-acpi)

Quoted 15 lines · On Tue, 17 Feb 2009 14:28:23 -0500 David Pflug <[email protected]> wrote:

While trying to boot kernels greater than 2.6.27 on this Toshiba Satellite 1135-S155, it freezes while initializing Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50]. However, it boots with pci=noacpi. The IRQ of the cardbus is shared by one of the USB controllers and the IDE controller.

Identical symptoms on 2.6.29rc5.

Last few messages with default kernel line:
pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x0000004bffffff
pci 0000:02:02.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11

Quoted 8 lines

dmesg with acpi=off:
http://dpaste.com/hold/121766/

Kernel config:
http://dpaste.com/hold/121721/

lspci output:
http://dpaste.com/hold/121768/

presumably an acpi-related thing.

Quoted 1 line

Is there anything else I can do to help debug?

Best to raise a report against acpi at bugzilla.kernel.org, please.

Often it's better to report kernel bugs via email, but acpi is exceptional in that regard. It's all a bit confusing.