83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
PATCH v4 6/7 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
old code implemented the QE_ENET10 errata only for Silicon Revision 2.0. New code reads now the Silicon Revision register and sets dependend on the Silicon Revision the values as advised in the QE_ENET10 errata.
Signed-off-by Heiko Schocher <[email protected]>
--- board/keymile/kmeter1/kmeter1.c | 20 ++++++++++++-------- 1 files changed, 12 insertions(+), 8 deletions(-)
board/keymile/kmeter1/kmeter1.c +12 -8
@@ -24,6 +24,7 @@#include <miiphy.h> #include <asm/io.h> #include <asm/mmu.h> +#include <asm/processor.h> #include <pci.h> #include <libfdt.h>
@@ -80,19 +81,22 @@ static int board_init_i2c_busses (void)int board_early_init_r (void ) { -void *reg = (void *)(CONFIG_SYS_IMMR +0x14a8 ); -u32 val; +unsigned short svid;/* * Because of errata in the UCCs, we have to write to the reserved * registers to slow the clocks down. */ - val =in_be32 (reg); -/* UCC1 */ - val |=0x00003000 ; -/* UCC2 */ - val |=0x0c000000 ; -out_be32 (reg, val); + svid =SVR_REV (mfspr (SVR )); +switch (svid) { +case 0x0020 : +setbits_be32 ((void *)(CONFIG_SYS_IMMR +0x14a8 ),0x0c003000 ); +break ; +case 0x0021 : +clrsetbits_be32 ((void *)(CONFIG_SYS_IMMR +0x14ac ), +0x00000050 ,0x000000a0 ); +break ; + }/* enable the PHY on the PIGGY */ setbits (8 , (void *)(CONFIG_SYS_PIGGY_BASE +0x10003 ),0x01 );
Signature · 5 lines
1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany