Pull request: u-boot-video
Dear Wolfgang,
The following changes since commit bd76729bcbfd64b5d016a9b936f058931fc06eaf:
Becky Bruce (1):
MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
are available in the git repository at:
git://git.denx.de/u-boot-video.git master
Guennadi Liakhovetski (7):
i.MX31: fix SPI driver for shorter than 32 bit i.MX31: add a simple gpio driver
i.MX31: support GPIO as a chip-select in the mxc_spi driver A driver for the S6E63D6 SPI display controller from Samsung
LCD: support 8bpp BMPs on 16bpp displays
video: add an i.MX31 framebuffer driver
ARM: add an "eet" variant of the imx31_phycore board
Mark Jackson (1):
Add 16bpp BMP support
Makefile | 6 +- board/imx31_phycore/imx31_phycore.c | 57 +++ common/lcd.c | 100 +++-- drivers/gpio/Makefile | 3 +- drivers/gpio/mx31_gpio.c | 73 +++ drivers/spi/mxc_spi.c | 93 +++- drivers/video/Makefile | 2 + drivers/video/mx3fb.c | 856 +++++++++++++++++++++++++++++++++ drivers/video/s6e63d6.c | 76 +++ include/asm-arm/arch-mx31/mx31-regs.h | 16 + include/asm-arm/arch-mx31/mx31.h | 20 + include/configs/imx31_phycore.h | 23 + include/lcd.h | 21 +- include/s6e63d6.h | 37 ++ 14 files changed, 1325 insertions(+), 58 deletions(-) create mode 100644 drivers/gpio/mx31_gpio.c create mode 100644 drivers/video/mx3fb.c create mode 100644 drivers/video/s6e63d6.c create mode 100644 include/s6e63d6.h
Best regards,
Anatolij
Wolfgang Denk
AppliedDear Anatolij Gustschin,
Quoted 33 lines · In message <[email protected]> you wrote:
Dear Wolfgang,
The following changes since commit
bd76729bcbfd64b5d016a9b936f058931fc06eaf:
Becky Bruce (1):
MPC86xx: setCONFIG_MAX_MEM_MAPPEDto 2G by defaultare available in the git repository at:
git://git.denx.de/u-boot-video.gitmasterGuennadi Liakhovetski (7):
i.MX31: fix SPI driver for shorter than 32 bit i.MX31: add a simple gpio driver
i.MX31: support GPIO as a chip-select in themxc_spidriver A driver for the S6E63D6 SPI display controller from Samsung
LCD: support 8bpp BMPs on 16bpp displays
video: add an i.MX31 framebuffer driver
ARM: add an "eet" variant of theimx31_phycoreboardMark Jackson (1):
Add 16bpp BMP supportMakefile | 6 +- board/imx31_phycore/imx31_phycore.c | 57 +++ common/lcd.c | 100 +++-- drivers/gpio/Makefile | 3 +- drivers/gpio/mx31_gpio.c | 73 +++ drivers/spi/mxc_spi.c | 93 +++- drivers/video/Makefile | 2 + drivers/video/mx3fb.c | 856 +++++++++++++++++++++++++++++++++ drivers/video/s6e63d6.c | 76 +++ include/asm-arm/arch-mx31/mx31-regs.h | 16 + include/asm-arm/arch-mx31/mx31.h | 20 +
Quoted 8 lines
include/configs/imx31_phycore.h | 23 + include/lcd.h | 21 +- include/s6e63d6.h | 37 ++ 14 files changed, 1325 insertions(+), 58 deletions(-) create mode 100644 drivers/gpio/mx31_gpio.c create mode 100644 drivers/video/mx3fb.c create mode 100644 drivers/video/s6e63d6.c create mode 100644 include/s6e63d6.h
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If the hours are long enough and the pay is short enough, someone will say it's women's work.