Skip to contentSkip to conversation

sound broken on Creative Labs SB Audigy

2.6.29-rc7 etienne 2 participants 3 messages Mar 8, 2009

lore
Share & tools
lore

etienne

author
#0 lore raw

Hi Takashi,

on 2.6.29-rc7 my sound card Creative Labs SB Audigy doesn't work anymore it worked in the previous -rc i tested (rc5)

dmesg
EMU10K1_Audigy 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Installing spdif_bug patch: SB Audigy 2 ZS [SB0353]

cat /proc/asound/cards
0 [Audigy2 ]: Audigy2 - SB Audigy 2 ZS [SB0353]

                      SB Audigy 2 ZS [SB0353] (rev.4, serial:0x10031102) at 0xcc80, irq 16

lscpi
03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
lspci -vvv
03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
Subsystem: Creative Labs Device 1003
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at cc80 [size=64]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1

i've use alsa-info.sh, my info is stored at
http://www.alsa-project.org/db/?f=4460e77670d538196e11ae5e61e9b1f86fb9669b

if I revert the following commit, it works again

commit 1f9da5544073d38e05139f8ce9da24e78653c73e

Author: Takashi Iwai <[email protected]>
Date:   Tue Feb 24 15:31:02 2009 +0100

ALSA: emu10k1 - Fix digital/analog switch on audigy2 ZS

Fix the inverted logic of shared spdif switch.

Reference: Novell bnc#478496
https://bugzilla.novell.com/show_bug.cgi?id=478496

thanks,
Etienne

#1 lore raw

At Sun, 08 Mar 2009 12:43:01 +0100,

Quoted 40 lines · etienne

Hi Takashi,

on 2.6.29-rc7 my sound card Creative Labs SB Audigy doesn't work anymore it worked in the previous -rc i tested (rc5)

dmesg
EMU10K1_Audigy 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Installing spdif_bug patch: SB Audigy 2 ZS [SB0353]

cat /proc/asound/cards
0 [Audigy2 ]: Audigy2 - SB Audigy 2 ZS [SB0353]

                      SB Audigy 2 ZS [SB0353] (rev.4, serial:0x10031102) at 0xcc80, irq 16

lscpi
03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
lspci -vvv
03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
Subsystem: Creative Labs Device 1003
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at cc80 [size=64]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1

i've use alsa-info.sh, my info is stored at
http://www.alsa-project.org/db/?f=4460e77670d538196e11ae5e61e9b1f86fb9669b

if I revert the following commit, it works again

commit 1f9da5544073d38e05139f8ce9da24e78653c73e

Author: Takashi Iwai <[email protected]>
Date:   Tue Feb 24 15:31:02 2009 +0100
Quoted 8 lines

ALSA: emu10k1 - Fix digital/analog switch on audigy2 ZS

Fix the inverted logic of shared spdif switch.

Reference: Novell bnc#478496
https://bugzilla.novell.com/show_bug.cgi?id=478496

Check "Audigy Analog/Digital Output Jack" switch. This must be *off* to output from the analog jacks.

Before the patch, it was wrongly implemented and the patch fixes the (long-standing wrong) logic.

Takashi

author
#2 lore raw
Quoted 48 lines · Takashi Iwai

At Sun, 08 Mar 2009 12:43:01 +0100,

Quoted 46 lines · etienne

Hi Takashi,

on 2.6.29-rc7 my sound card Creative Labs SB Audigy doesn't work anymore it worked in the previous -rc i tested (rc5)

dmesg
EMU10K1_Audigy 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Installing spdif_bug patch: SB Audigy 2 ZS [SB0353]

cat /proc/asound/cards
0 [Audigy2 ]: Audigy2 - SB Audigy 2 ZS [SB0353]

                      SB Audigy 2 ZS [SB0353] (rev.4, serial:0x10031102) at 0xcc80, irq 16

lscpi
03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
lspci -vvv
03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
Subsystem: Creative Labs Device 1003
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at cc80 [size=64]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1

i've use alsa-info.sh, my info is stored at
http://www.alsa-project.org/db/?f=4460e77670d538196e11ae5e61e9b1f86fb9669b

if I revert the following commit, it works again

commit 1f9da5544073d38e05139f8ce9da24e78653c73e

Author: Takashi Iwai <[email protected]>
Date:   Tue Feb 24 15:31:02 2009 +0100

ALSA: emu10k1 - Fix digital/analog switch on audigy2 ZS

Fix the inverted logic of shared spdif switch.

Reference: Novell bnc#478496
https://bugzilla.novell.com/show_bug.cgi?id=478496

Quoted 8 lines
Quoted 1 line

Check "Audigy Analog/Digital Output Jack" switch. This must be *off* to output from the analog jacks.

Before the patch, it was wrongly implemented and the patch fixes the (long-standing wrong) logic.

thanks, that works

Etienne