Correct error handling in rtcan_ixxat_pci.c if card has wrong sub_sys_id
PATCH 1/1 Correct error handling in rtcan_ixxat_pci.c if card has wrong sub_sys_id
Hi,
the subject says it all. The patch is only compile-tested.
Signature · 1 line
Sebastian
drivers/can/sja1000/rtcan_ixxat_pci.c +4 -2
@@ -223,8 +223,10 @@ static int __devinit ixxat_pci_init_oneRTCAN_DBG ("%s: Initializing device %04x:%04x:%04x\n" ,RTCAN_DRV_NAME , pdev->vendor, pdev->device, sub_sys_id); -if (sub_sys_id !=IXXAT_PCI_SUB_SYS_ID ) -return -ENODEV ; +if (sub_sys_id !=IXXAT_PCI_SUB_SYS_ID ) { + ret = -ENODEV ; + goto failure_release_pci; + }/* Enable memory and I/O space */ if ((ret =pci_write_config_word (pdev,0x04 ,0x3 )))