8xx, mgsuvd: rename board to a more generic name
PATCH 2/3 8xx, mgsuvd: rename board to a more generic name
renaming the "mgsuvd" board port into "km8xx", because there come more similar boards from keymile. Compiling the mgsuvd board with "make mgsuvd_config" remains.
---
Makefile | 2 +-
board/keymile/{mgsuvd => km8xx}/Makefile | 2 +-
board/keymile/{mgsuvd => km8xx}/config.mk | 0
board/keymile/{mgsuvd/mgsuvd.c => km8xx/km8xx.c} | 0
.../mgsuvd_hdlc_enet.c => km8xx/km8xx_hdlc_enet.c} | 0
board/keymile/{mgsuvd => km8xx}/u-boot.lds | 0
include/configs/km8xx.h | 312 ++++++++++++++++++++
include/configs/mgsuvd.h | 281 +-----------------
8 files changed, 316 insertions(+), 281 deletions(-)
rename board/keymile/{mgsuvd => km8xx}/Makefile (98%)
rename board/keymile/{mgsuvd => km8xx}/config.mk (100%)
rename board/keymile/{mgsuvd/mgsuvd.c => km8xx/km8xx.c} (100%)
rename board/keymile/{mgsuvd/mgsuvd_hdlc_enet.c => km8xx/km8xx_hdlc_enet.c} (100%)
rename board/keymile/{mgsuvd => km8xx}/u-boot.lds (100%)
create mode 100644 include/configs/km8xx.hMakefile +1 -1
@@ -938,7 +938,7 @@ MBX860T_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx mgsuvd_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile + @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile MHPC_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
board/keymile/km8xx/Makefile renamed from board/keymile/mgsuvd/Makefile +1 -1
@@ -29,7 +29,7 @@ endif LIB = $(obj)lib$(BOARD).a COBJS = $(BOARD).o ../common/common.o ../common/keymile_hdlc_enet.o \ - mgsuvd_hdlc_enet.o + km8xx_hdlc_enet.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))
board/keymile/km8xx/config.mk renamed from board/keymile/mgsuvd/config.mk +0 -0
board/keymile/km8xx/km8xx.c renamed from board/keymile/mgsuvd/mgsuvd.c +0 -0
board/keymile/km8xx/km8xx_hdlc_enet.c renamed from board/keymile/mgsuvd/mgsuvd_hdlc_enet.c +0 -0
board/keymile/km8xx/u-boot.lds renamed from board/keymile/mgsuvd/u-boot.lds +0 -0
include/configs/km8xx.h new file +312 -0
312 lines not on this page · raw message
include/configs/mgsuvd.h +2 -279
289 lines not on this page · raw message
Signature · 5 lines
1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 2/3 8xx, mgsuvd: rename board to a more generic name
Dear Heiko Schocher,
Quoted 6 lines · In message <[email protected]> you wrote:
renaming the "mgsuvd" board port into "km8xx", because there come more similar boards from keymile. Compiling the mgsuvd board with "make
mgsuvd_config" remains.Signed-off-by Heiko Schocher <[email protected]>
Parts of this change are also mixed in into the next patch ([PATCH 3/3] 8xx: add support for new keymile kmsupx4 board) - please clean up.
...
Quoted 4 lines
new file mode 100644
index 0000000..1cb7756include/configs/km8xx.h new file +0
-0
...
Quoted 1 line
+#define
CONFIG_MPC8661 /* This is a MPC866 CPU */
Line length.
include/configs/km8xx.h line 50
Quoted 2 lines
include/configs/km8xx.h new file +2
-0+#define CONFIG_SYS_CPM_BOOTCOUNT_ADDR 0x1eb0/* In case of SMC relocation, the +* default value is not working */
Line length.
Quoted 1 line
+#define
CONFIG_TIMESTAMP/* but print image timestmps */
Line length.
include/configs/km8xx.h line 98
Quoted 3 lines
include/configs/km8xx.h new file +3
-0+#define CONFIG_SYS_INIT_RAM_END 0x2F00/* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 64/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
Line length.
include/configs/km8xx.h line 110
Quoted 3 lines
include/configs/km8xx.h new file +3
-0+#define CONFIG_SYS_MONITOR_LEN (384 << 10)/* Reserve 384 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MALLOC_LEN (256 << 10)/* Reserve 256 kB for malloc() */
Line length.
and so on.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Sometimes a man will tell his bartender things he'll never tell his doctor. -- Dr. Phillip Boyce, "The Menagerie" ("The Cage"), stardate unknown.
PATCH 2/3 8xx, mgsuvd: rename board to a more generic name
In reply to Heiko SchocherQuoted 2 lines · On Wed, 11 Mar 2009 09:04:45 +0100 Heiko Schocher <[email protected]> wrote:
Compiling the mgsuvd board with "make
mgsuvd_config" remains.
Why?
Kim
PATCH 2/3 8xx, mgsuvd: rename board to a more generic name
Quoted 5 lines · On Wed, 11 Mar 2009 13:06:27 -0500 Kim Phillips <[email protected]>…
Quoted 3 lines
Compiling the mgsuvd board with "make
mgsuvd_config" remains.Why?
nm, I see why - later on in the patchseries you add another 8xx based board.
Kim