Skip to contentSkip to conversation

sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp

PATCH In review Nobuhiro Iwamatsu 2 participants 3 messages Mar 17, 2009 SuperH

lore
Share & tools
lore

Nobuhiro Iwamatsu

author
#0 lore raw

PATCH 1/1 sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp

IRQ for sh_eth of sh7763rdp became multi handling. Therefore, the IRQ number of sh_eth is changed, too.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>
---
 arch/sh/boards/mach-sh7763rdp/setup.c |   10 +++++++---
 1 files changed, 7 insertions(+), 3 deletions(-)
arch/sh/boards/mach-sh7763rdp/setup.c +7 -3
index 6f926fd..27d1c9e 100644
@@ -63,15 +63,19 @@ static struct platform_device sh7763rdp_nor_flash_device = {
 	},
 };
 
-/* SH-Ether */
+/*
+ * SH-Ether
+ *
+ * SH Ether of SH7763 has multi IRQ handling.
+ * (57,58,59 -> 57)
+ */
 static struct resource sh_eth_resources[] = {
 	{
 		.start  = 0xFEE00800,   /* use eth1 */
 		.end    = 0xFEE00F7C - 1,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.start  = 58,   /* irq number */
-		.end    = 58,
+		.start  = 57,   /* irq number */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
Signature · 1 line
1.6.2
#1 lore raw
Quoted 4 lines · Nobuhiro Iwamatsu

IRQ for sh_eth of sh7763rdp became multi handling. Therefore, the IRQ number of sh_eth is changed, too.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>
Quoted 4 lines · Nobuhiro Iwamatsu

Espt-giga is the board which used SH7763. This supports serial, Gigabit ether, USB host and MTD.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>

I've rolled the defconfig patch in with the board patch and checked these in, thanks.

author
#2 lore raw
In reply to Nobuhiro Iwamatsu
Quoted 6 lines · Paul Mundt
Quoted 4 lines · Nobuhiro Iwamatsu

IRQ for sh_eth of sh7763rdp became multi handling. Therefore, the IRQ number of sh_eth is changed, too.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>
Quoted 9 lines
Quoted 4 lines · Nobuhiro Iwamatsu

Espt-giga is the board which used SH7763. This supports serial, Gigabit ether, USB host and MTD.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>

I've rolled the defconfig patch in with the board patch and checked these in, thanks.

OK, thank you a lot.

Best regards,
Nobuhiro