Skip to contentSkip to conversation

access problem

DISCUSSION Leonardo Carneiro 2 participants 3 messages Mar 17, 2009 – May 26, 2009

lore
Share & tools
lore
#0 lore raw

Hi Paulo,

tks for the tip, i already have a internal DNS, but i don't have a external one =/

anyother ideas?

paulobruck1 escreveu:

Quoted 74 lines

Em Seg, 2009-03-16 às 16:41 -0300, Leonardo Carneiro escreveu:

Quoted 2 lines

Hi everyone.

Hi Leonardo

Quoted 4 lines

I'm new in the list and hope have a nice time here. First of all, sorry about my poor enlgish, i'm from Brasil.

welcome...80)

Quoted 11 lines

I've got a standard scenario with a private network (192.168.1.0/24) beeing natted by a internet server (192.168.1.1) running iptables 1.3.0.

In the private network I have a application server (192.168.1.2) running a service on port 5222. The port is properly forwarded in internet server, and users across the internet can access the service through the public IP of the internet server.

Users on the private network can access the service through the private IP of the server, but cannot access using the public ip. Accessing using the public ip would be very usefull, since lots of users have notebooks and they access the service inside and outside the private network

those are interface infos and the rules forwarding the port to the application server:
eth0: public IP
eth1: private network, 192.168.1.1

If you like your intenal users use this ip, install a Internal DNS for them and use at your externat ip use a dns too. Example:

Internal DNS
aplicationsserver IN A 192.168.1.1

EXternal DNS
applicationserver IN A XXX.XXX.XXX.XXX

                 ( your public IP that is redirect to 192.168.1.1)

Thats all...

best regards

Quoted 26 lines

iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth0 --dport 5222 -j DNAT --to-destination 192.168.1.2 iptables -A FORWARD -p tcp -m tcp -d 192.168.1.2 -i eth0 -o eth1 --dport 5222 -j ACCEPT

I've done some tests, adding some rules like

iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth1 --dport 5222 -j DNAT --to-destination 192.168.1.2 iptables -A FORWARD -p tcp -m tcp -d 192.168.1.2 -i eth0 -o eth1 --dport 5222 -j ACCEPT

or just

iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth1 --dport 5222 -j DNAT --to-destination 192.168.1.2

but i just cannot connect using the public ip =S

sometimes the server answer the request, but using the private ip, no the public ip requested by the host, and sometimes the server just not answer the request.

any ideas how can i solve this?

tks in advance.

--
To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#1 lore raw

spend $10.

register a domain.

use split DNS as described below.

:-)

b

Quoted 91 lines · Leonardo Carneiro

Hi Paulo,

tks for the tip, i already have a internal DNS, but i don't have a external one =/

anyother ideas?

paulobruck1 escreveu:

Quoted 76 lines

Em Seg, 2009-03-16 às 16:41 -0300, Leonardo Carneiro escreveu:

Quoted 2 lines

Hi everyone.

Hi Leonardo

Quoted 4 lines

I'm new in the list and hope have a nice time here. First of all, sorry about my poor enlgish, i'm from Brasil.

welcome...80)

Quoted 11 lines

I've got a standard scenario with a private network (192.168.1.0/24) beeing natted by a internet server (192.168.1.1) running iptables 1.3.0.

In the private network I have a application server (192.168.1.2) running a service on port 5222. The port is properly forwarded in internet server, and users across the internet can access the service through the public IP of the internet server.

Users on the private network can access the service through the private IP of the server, but cannot access using the public ip. Accessing using the public ip would be very usefull, since lots of users have notebooks and they access the service inside and outside the private network

those are interface infos and the rules forwarding the port to the application server:
eth0: public IP
eth1: private network, 192.168.1.1

If you like your intenal users use this ip, install a Internal DNS for them and use at your externat ip use a dns too. Example:

Internal DNS
aplicationsserver IN A 192.168.1.1

EXternal DNS
applicationserver IN A XXX.XXX.XXX.XXX

                 ( your public IP that is redirect to 192.168.1.1)

Thats all...

best regards

Quoted 28 lines

iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth0 --dport 5222 -j DNAT --to-destination 192.168.1.2 iptables -A FORWARD -p tcp -m tcp -d 192.168.1.2 -i eth0 -o eth1
--dport 5222 -j ACCEPT

I've done some tests, adding some rules like

iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth1 --dport 5222 -j DNAT --to-destination 192.168.1.2 iptables -A FORWARD -p tcp -m tcp -d 192.168.1.2 -i eth0 -o eth1
--dport 5222 -j ACCEPT

or just

iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth1 --dport 5222 -j DNAT --to-destination 192.168.1.2

but i just cannot connect using the public ip =S

sometimes the server answer the request, but using the private ip, no the public ip requested by the host, and sometimes the server just not answer the request.

any ideas how can i solve this?

tks in advance.

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#2 lore raw

Hi again everyone. Sorry for revivin a old topic, but i solved the problem. just did a SNAT. tks for the help anyway.

   -A POSTROUTING -p tcp -m tcp -d 192.168.1.2 --dport 5222 -j SNAT
   --to-source 192.168.1.1

Brian Austin - Standard Universal escreveu:

Quoted 110 lines

spend $10.

register a domain.

use split DNS as described below.

:-)

b

Quoted 93 lines · Leonardo Carneiro

Hi Paulo,

tks for the tip, i already have a internal DNS, but i don't have a external one =/

anyother ideas?

paulobruck1 escreveu:

Quoted 78 lines

Em Seg, 2009-03-16 às 16:41 -0300, Leonardo Carneiro escreveu:

Quoted 2 lines

Hi everyone.

Hi Leonardo

Quoted 4 lines

I'm new in the list and hope have a nice time here. First of all, sorry about my poor enlgish, i'm from Brasil.

welcome...80)

Quoted 11 lines

I've got a standard scenario with a private network (192.168.1.0/24) beeing natted by a internet server (192.168.1.1) running iptables 1.3.0.

In the private network I have a application server (192.168.1.2) running a service on port 5222. The port is properly forwarded in internet server, and users across the internet can access the service through the public IP of the internet server.

Users on the private network can access the service through the private IP of the server, but cannot access using the public ip. Accessing using the public ip would be very usefull, since lots of users have notebooks and they access the service inside and outside the private network

those are interface infos and the rules forwarding the port to the application server:
eth0: public IP
eth1: private network, 192.168.1.1

If you like your intenal users use this ip, install a Internal DNS for them and use at your externat ip use a dns too. Example:

Internal DNS
aplicationsserver IN A 192.168.1.1

EXternal DNS
applicationserver IN A XXX.XXX.XXX.XXX

                 ( your public IP that is redirect to 192.168.1.1)

Thats all...

best regards

Quoted 31 lines

iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth0 --dport 5222 -j DNAT --to-destination 192.168.1.2 iptables -A FORWARD -p tcp -m tcp -d 192.168.1.2 -i eth0 -o eth1 --dport 5222 -j ACCEPT

I've done some tests, adding some rules like

iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth1 --dport 5222 -j DNAT --to-destination 192.168.1.2 iptables -A FORWARD -p tcp -m tcp -d 192.168.1.2 -i eth0 -o eth1 --dport 5222 -j ACCEPT

or just

iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth1 --dport 5222 -j DNAT --to-destination 192.168.1.2

but i just cannot connect using the public ip =S

sometimes the server answer the request, but using the private ip, no the public ip requested by the host, and sometimes the server just not answer the request.

any ideas how can i solve this?

tks in advance.

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signature · 8 lines
*Leonardo de Souza Carneiro*
*Veltrac - Tecnologia em Logística.*
[email protected] <mailto:[email protected]>
http://www.veltrac.com.br <http://www.veltrac.com.br/>
/Fone Com.: (43)2105-5601/
/Av. Higienópolis 1601 Ed. Eurocenter Sl. 803/
/Londrina- PR/
/Cep: 86015-010/