Skip to contentSkip to conversation

problem with rpc.statd

NFS Maria McKinley 3 participants 3 messages Mar 21, 2009 – Mar 23, 2009 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hello all,

I hope this is an appropriate place to post this, as I am running out of ideas.

I have a machine that I am attempting to boot over the network. I have compiled a kernel for it, Debian Lenny Linux version 2.6.26, with nfs file system and root file system support. For a complete rundown on how I have created the setup, please see:

http://www.shadlen.org/~maria/pmwiki/Work/Gpxe

Things work well up until it is time to mount the file system from fstab (ie, it mounts everything ro, makes it all the way through init and gives me a command prompt). The rw mount is not happening because rpc.statd never starts. If I try to start rpc.statd by hand, it complains that: Opening /var/run/rpc.statd.pid failed: Read-only file system. Since I am mounting the root directory over nfs, it makes sense for this file to be read-only until rpc.statd starts and Is there any way I can start statd without a pid file until I get the root file system mounted rw? Or something else to try?

I had a similar setup working with an earlier version of nfs-common, but it broke when I upgraded recently. Currently using nfs-common 1:1.1.2-6lenny1

thank you for any direction anyone can point me, as I am about at my wit's end...

cheers,
maria

------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
_______________________________________________
Please note that [email protected] is being discontinued. Please subscribe to [email protected] instead.
http://vger.kernel.org/vger-lists.html#linux-nfs

#2 lore raw
In reply to a message not in the archive
Quoted 9 lines · Maria McKinley

Things work well up until it is time to mount the file system from fstab (ie, it mounts everything ro, makes it all the way through init and gives me a command prompt). The rw mount is not happening because rpc.statd never starts. If I try to start rpc.statd by hand, it complains that: Opening /var/run/rpc.statd.pid failed: Read-only file system. Since I am mounting the root directory over nfs, it makes sense for this file to be read-only until rpc.statd starts and Is there any way I can start statd without a pid file until I get the root file system mounted rw? Or something else to try?

Try setting RAMRUN=yes in /etc/default/rcS, which will mount a tmpfs on /var/run early in the boot process. I think I read something about defaulting this to yes being a release goal for squeeze, so there may be lenny packages that won't like this.

Signature · 18 lines
Paul Collins
Wellington, New Zealand

Dag vijandelijk luchtschip de huismeester is dood

------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
NFS maillist  -  [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
_______________________________________________
Please note that [email protected] is being discontinued.
Please subscribe to [email protected] instead.
    http://vger.kernel.org/vger-lists.html#linux-nfs
#3 lore raw
Quoted 12 lines · Paul Collins
Quoted 9 lines · Maria McKinley

Things work well up until it is time to mount the file system from fstab (ie, it mounts everything ro, makes it all the way through init and gives me a command prompt). The rw mount is not happening because rpc.statd never starts. If I try to start rpc.statd by hand, it complains that: Opening /var/run/rpc.statd.pid failed: Read-only file system. Since I am mounting the root directory over nfs, it makes sense for this file to be read-only until rpc.statd starts and Is there any way I can start statd without a pid file until I get the root file system mounted rw? Or something else to try?

Quoted 5 lines

Try setting RAMRUN=yes in /etc/default/rcS, which will mount a tmpfs on /var/run early in the boot process. I think I read something about defaulting this to yes being a release goal for squeeze, so there may be lenny packages that won't like this.

Thank you so much, that got rpc.statd started! NFS is still not behaving quite right, unfortunately. The /etc/fstab file:

# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
10.208.108.18:/tftpboot/oscar / nfs
rw,rsize=8192,wsize=8192,nfsvers=3 0 0
proc /proc proc defaults 0 0
10.208.108.18:/usr /usr nfs rw,rsize=8192,wsize=8192,nfsvers=3
0 0

/dev/fd0        /floppy         auto    defaults,user,noauto    0       0
/dev/cdrom      /cdrom          iso9660 defaults,ro,user,noauto 0       0

10.208.108.12:/home /home nfs
rw,rsize=8192,wsize=8192,nfsvers=3,nosuid,nodev,async 0 0
10.208.108.12:/lab /lab nfs
rw,rsize=8192,wsize=8192,nfsvers=3,nosuid,nodev 0 0

But, this is not how things are being mounted:

root@oscar:/# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/hda1              19G  854M   17G   5% /
tmpfs                 1.9G     0  1.9G   0% /lib/init/rw
udev                   10M   64K   10M   1% /dev
tmpfs                 1.9G     0  1.9G   0% /dev/shm
df: `/tftpboot': No such file or directory
/dev/hda6              19G  854M   17G   5% /tmp
/dev/hda7              33G   11G   21G  34% /usr
/dev/hda2              19G  854M   17G   5% /var
rpc_pipefs             19G  854M   17G   5% /var/lib/nfs/rpc_pipefs
10.208.108.12:/lab     19G  854M   17G   5% /lab
10.208.108.12:/home    19G  854M   17G   5% /home

For some reason, it looks like things are being mounted locally, even though they cannot be (no local hard drive). The /lab and /home directories are actually not being mounted, they are empty. And all of the directories appear to be read-only.

If I try to remount, I get this:

root@oscar:/# mount -a
can't create lock file /etc/mtab~2820: Read-only file system (use -n 
flag to override)
root@oscar:/# mount -an
mount.nfs: /usr is busy or already mounted

It does not appear to even try to remount /lab or /home, and / is still read only, even if I try to mount it by hand:

root@oscar:/# mount.nfs 10.208.108.18:/tftpboot/oscar / -v -rw -n -o 
rsize=8192,wsize=8192
mount.nfs: trying 10.208.108.18 prog 100003 vers 3 prot TCP port 2049
mount.nfs: trying 10.208.108.18 prog 100005 vers 3 prot UDP port 44350
10.208.108.18:/tftpboot/oscar on / type nfs (rsize=8192,wsize=8192)
root@oscar:/# touch /tmp/test
touch: cannot touch `/tmp/test': Read-only file system

Any ideas would be appreciated.

cheers,
maria

------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
_______________________________________________
Please note that [email protected] is being discontinued. Please subscribe to [email protected] instead.
http://vger.kernel.org/vger-lists.html#linux-nfs