Skip to contentSkip to conversation

Thinkpad T61 - Fan running a lot of time

DISCUSSION Renato S. Yamane 2 participants 4 messages Mar 24, 2009 – Mar 25, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

Anyone have seen fan turned-on in 90% of the time?

I see that fan power-on when processor is up than 45°C and power-off when is under 45°C.

Temperature difference between 2 cores is 5°C in idle (Core1=45°C and Core2=40°C)

Local temperature is ~25°C, kpowersave is in "dynamic mode", my 2 cores (Intel T7500) is running 94% of the time in idle (checked with "top"), with clock in 800MHz.

The fan speed is ~2600RPM (always under 3000RPM), and I think that is not enough to cooling the processor, because is necessary 3min to decrease 1°C in Core1 and only 40sec to increase 1°C.

I think that is necessary a higher fan speed.

I see this in Debian Lenny (2.6.26-1) and 2.6.28.8 kernel... Maybe in other versions too.

Regards,
Renato

#1 lore raw
Quoted 5 lines · Renato S. Yamane

The fan speed is ~2600RPM (always under 3000RPM), and I think that is not enough to cooling the processor, because is necessary 3min to decrease 1°C in Core1 and only 40sec to increase 1°C.

I think that is necessary a higher fan speed.

Or a better thermal coupling between the fan assembly and the processor... this is a weak area on thinkpads.

If your box is still under warranty, I suggest you to use thinkpad-acpi fan control to keep your fan at level 7 (fastest normal fan level). If that's not enough, call in for a motherboard replacement.

Signature · 4 lines
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh
#2 lore raw
Quoted 7 lines · Henrique de Moraes Holschuh
Quoted 5 lines · Renato S. Yamane

The fan speed is ~2600RPM (always under 3000RPM), and I think that is not enough to cooling the processor, because is necessary 3min to decrease 1°C in Core1 and only 40sec to increase 1°C.

I think that is necessary a higher fan speed.

Quoted 7 lines

Or a better thermal coupling between the fan assembly and the processor... this is a weak area on thinkpads.

If your box is still under warranty, I suggest you to use thinkpad-acpi fan control to keep your fan at level 7 (fastest normal fan level). If that's not enough, call in for a motherboard replacement.

Updated BIOS to 7LETC5WW (2.25) and...

Fan speed is stabilished in ~3000RPM, temperature go to 42°C and fan speed still power-on.

# cat /proc/acpi/ibm/fan
status:         enabled
speed:          3028
level:          auto
# echo level 7 > /proc/acpi/ibm/fan
bash: echo: write error: Invalid argument

How can I change fan level?

Regards,
Renato

#3 lore raw
Quoted 4 lines · Renato S. Yamane
# echo level 7 > /proc/acpi/ibm/fan
bash: echo: write error: Invalid argument

How can I change fan level?

Read the driver documentation, at Documentation/laptops/thinkpad-acpi.txt. Fan control is locked by default, for hardware safety reasons. The docs tell you why, how to use the fan control interface, and how to unlock it.

Also, I suggest you get used to the hwmon fan control interface on /sys, procfs is going away sooner or later...

Signature · 4 lines
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh