Skip to contentSkip to conversation

Cinergy Hybrid T USB XS (0ccd:0042) not working

DISCUSSION David Woitkowski 2 participants 4 messages Mar 24, 2009 – Apr 23, 2009 Media (V4L/DVB)

lore
Share & tools
lore

David Woitkowski

author
#0 lore raw

Hi,

I'm currently fiddling around with my Terratec Cinergy Hybrid T USB XS

$ lsusb
Bus 008 Device 007: ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid
T XS
$ uname -r
2.6.27-11-generic
(it's a ubuntu 8.10 machine)

I have installed the latest em28xx-new drivers provided by Markus Rechberger and get

$ modprobe em28xx device_mode=1
$ modprobe em28xx-dvb
(attaching the device)
$ dmesg
[ 5155.748881] em28xx v4l2 driver version 0.0.1 loaded
[ 5155.750479] usbcore: registered new interface driver em28xx
[ 5169.348074] usb 8-2: new high speed USB device using ehci_hcd and
address 7
[ 5169.494648] usb 8-2: configuration #1 chosen from 1 choice
[ 5169.496087] em28xx: new video device (0ccd:0042): interface 0, class 255
[ 5169.496099] em28xx: device is attached to a USB 2.0 bus
[ 5169.496105] em28xx #0: Alternate settings: 8
[ 5169.496110] em28xx #0: Alternate setting 0, max size= 0
[ 5169.496114] em28xx #0: Alternate setting 1, max size= 0
[ 5169.496119] em28xx #0: Alternate setting 2, max size= 1448
[ 5169.496123] em28xx #0: Alternate setting 3, max size= 2048
[ 5169.496128] em28xx #0: Alternate setting 4, max size= 2304
[ 5169.496132] em28xx #0: Alternate setting 5, max size= 2580
[ 5169.496136] em28xx #0: Alternate setting 6, max size= 2892
[ 5169.496140] em28xx #0: Alternate setting 7, max size= 3072
[ 5169.743938] attach_inform: tvp5150 detected.
[ 5169.808565] tvp5150 0-005c: tvp5150am1 detected.
[ 5171.360938] successfully attached tuner
[ 5171.367995] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[ 5171.386199] em28xx #0: V4L2 device registered as /dev/video1
[ 5171.386657] em2880-dvb.c: DVB Init
[ 5171.687691] DVB: registering new adapter (em2880 DVB-T)
[ 5171.687943] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[ 5171.691406] input: em2880/em2870 remote control as
/devices/virtual/input/input11
[ 5171.737150] em28xx-input.c: remote control handler attached
[ 5171.737157] em28xx #0: Found Terratec Hybrid XS

everything seems to be all right but actually nothing I've tested so far works.

My current attempts cover dvb-t:

$ scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Bielefeld >
channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Bielefeld
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 514000000 0 2 9 1 1 3 0
initial transponder 554000000 0 1 9 3 1 3 0
initial transponder 570000000 0 2 9 1 1 3 0
Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to:

514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to:

514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE

(tuning failed)
WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to:

554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to:

554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE

(tuning failed)
WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to:

570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to:

570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE

(tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

and after that attempt I got

$ dmesg
... as before ...
[ 5171.691406] input: em2880/em2870 remote control as
/devices/virtual/input/input11
[ 5171.737150] em28xx-input.c: remote control handler attached
[ 5171.737157] em28xx #0: Found Terratec Hybrid XS
[ 5191.914643] em28xx_dvb_init
[ 5205.996064] powered down zl10353
[ 5308.636444] tvp5150 0-005c: tvp5150am1 detected.
[ 5712.944647] em28xx_dvb_init
[ 5727.073036] powered down zl10353

Any hints? Is there any possibility this is a variant of the 0042 not covered by the em28xx-new? (BTW: I tried analogue TV too just recieving white noise with no signal on every channel)

I am willing to debug this but have no clue where to start.

Thanks for your help,

David

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#1 lore raw

Hi,

Quoted 110 lines · David Woitkowski

Hi,

I'm currently fiddling around with my Terratec Cinergy Hybrid T USB XS

$ lsusb
Bus 008 Device 007: ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid
T XS
$ uname -r
2.6.27-11-generic
(it's a ubuntu 8.10 machine)

I have installed the latest em28xx-new drivers provided by Markus Rechberger and get

$ modprobe em28xx device_mode=1
$ modprobe em28xx-dvb
(attaching the device)
$ dmesg
[ 5155.748881] em28xx v4l2 driver version 0.0.1 loaded
[ 5155.750479] usbcore: registered new interface driver em28xx
[ 5169.348074] usb 8-2: new high speed USB device using ehci_hcd and
address 7
[ 5169.494648] usb 8-2: configuration #1 chosen from 1 choice
[ 5169.496087] em28xx: new video device (0ccd:0042): interface 0, class 255
[ 5169.496099] em28xx: device is attached to a USB 2.0 bus
[ 5169.496105] em28xx #0: Alternate settings: 8
[ 5169.496110] em28xx #0: Alternate setting 0, max size= 0
[ 5169.496114] em28xx #0: Alternate setting 1, max size= 0
[ 5169.496119] em28xx #0: Alternate setting 2, max size= 1448
[ 5169.496123] em28xx #0: Alternate setting 3, max size= 2048
[ 5169.496128] em28xx #0: Alternate setting 4, max size= 2304
[ 5169.496132] em28xx #0: Alternate setting 5, max size= 2580
[ 5169.496136] em28xx #0: Alternate setting 6, max size= 2892
[ 5169.496140] em28xx #0: Alternate setting 7, max size= 3072
[ 5169.743938] attach_inform: tvp5150 detected.
[ 5169.808565] tvp5150 0-005c: tvp5150am1 detected.
[ 5171.360938] successfully attached tuner
[ 5171.367995] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[ 5171.386199] em28xx #0: V4L2 device registered as /dev/video1
[ 5171.386657] em2880-dvb.c: DVB Init
[ 5171.687691] DVB: registering new adapter (em2880 DVB-T)
[ 5171.687943] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[ 5171.691406] input: em2880/em2870 remote control as
/devices/virtual/input/input11
[ 5171.737150] em28xx-input.c: remote control handler attached
[ 5171.737157] em28xx #0: Found Terratec Hybrid XS

everything seems to be all right but actually nothing I've tested so far works.

My current attempts cover dvb-t:

$ scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Bielefeld >
channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Bielefeld
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 514000000 0 2 9 1 1 3 0
initial transponder 554000000 0 1 9 3 1 3 0
initial transponder 570000000 0 2 9 1 1 3 0
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

and after that attempt I got

$ dmesg
... as before ...
[ 5171.691406] input: em2880/em2870 remote control as
/devices/virtual/input/input11
[ 5171.737150] em28xx-input.c: remote control handler attached
[ 5171.737157] em28xx #0: Found Terratec Hybrid XS
[ 5191.914643] em28xx_dvb_init
[ 5205.996064] powered down zl10353
[ 5308.636444] tvp5150 0-005c: tvp5150am1 detected.
[ 5712.944647] em28xx_dvb_init
[ 5727.073036] powered down zl10353
Quoted 6 lines

Any hints? Is there any possibility this is a variant of the 0042 not covered by the em28xx-new? (BTW: I tried analogue TV too just recieving white noise with no signal on every channel)

I am willing to debug this but have no clue where to start.

I have that device here, I guess it's an issue with the zl10353 or mt352 which is in the kernel because it already worked for a very long time :-)
I'll check it within the next 2 days.

-Markus

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

author
#2 lore raw

Hi,

Quoted 7 lines · Markus Rechberger
Quoted 6 lines · David Woitkowski

I'm currently fiddling around with my Terratec Cinergy Hybrid T USB XS

$ lsusb
Bus 008 Device 007: ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid
T XS
Quoted 8 lines
Quoted 3 lines
$ uname -r
2.6.27-11-generic
(it's a ubuntu 8.10 machine)

I have that device here, I guess it's an issue with the zl10353 or mt352 which is in the kernel because it already worked for a very long time :-)
I'll check it within the next 2 days.

Okay, thanks for your quick response. Tell me if you need more information on that issue.

David

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

author
#3 lore raw
In reply to Markus Rechberger

Hi,

could you please give me an update on the issue quoted below regarding the Terratec Cinergy T USB XS (0ccd:0042). I tried it with the most recent em28xx-new kernel module and got the same error as below.

David

Zitat von Markus Rechberger <[email protected]>:

Quoted 120 lines

Hi,

Quoted 110 lines · David Woitkowski

Hi,

I'm currently fiddling around with my Terratec Cinergy Hybrid T USB XS

$ lsusb
Bus 008 Device 007: ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid
T XS
$ uname -r
2.6.27-11-generic
(it's a ubuntu 8.10 machine)

I have installed the latest em28xx-new drivers provided by Markus Rechberger and get

$ modprobe em28xx device_mode=1
$ modprobe em28xx-dvb
(attaching the device)
$ dmesg
[ 5155.748881] em28xx v4l2 driver version 0.0.1 loaded
[ 5155.750479] usbcore: registered new interface driver em28xx
[ 5169.348074] usb 8-2: new high speed USB device using ehci_hcd and
address 7
[ 5169.494648] usb 8-2: configuration #1 chosen from 1 choice
[ 5169.496087] em28xx: new video device (0ccd:0042): interface 0, class 255
[ 5169.496099] em28xx: device is attached to a USB 2.0 bus
[ 5169.496105] em28xx #0: Alternate settings: 8
[ 5169.496110] em28xx #0: Alternate setting 0, max size= 0
[ 5169.496114] em28xx #0: Alternate setting 1, max size= 0
[ 5169.496119] em28xx #0: Alternate setting 2, max size= 1448
[ 5169.496123] em28xx #0: Alternate setting 3, max size= 2048
[ 5169.496128] em28xx #0: Alternate setting 4, max size= 2304
[ 5169.496132] em28xx #0: Alternate setting 5, max size= 2580
[ 5169.496136] em28xx #0: Alternate setting 6, max size= 2892
[ 5169.496140] em28xx #0: Alternate setting 7, max size= 3072
[ 5169.743938] attach_inform: tvp5150 detected.
[ 5169.808565] tvp5150 0-005c: tvp5150am1 detected.
[ 5171.360938] successfully attached tuner
[ 5171.367995] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[ 5171.386199] em28xx #0: V4L2 device registered as /dev/video1
[ 5171.386657] em2880-dvb.c: DVB Init
[ 5171.687691] DVB: registering new adapter (em2880 DVB-T)
[ 5171.687943] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[ 5171.691406] input: em2880/em2870 remote control as
/devices/virtual/input/input11
[ 5171.737150] em28xx-input.c: remote control handler attached
[ 5171.737157] em28xx #0: Found Terratec Hybrid XS

everything seems to be all right but actually nothing I've tested so far works.

My current attempts cover dvb-t:

$ scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Bielefeld >
channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Bielefeld
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 514000000 0 2 9 1 1 3 0
initial transponder 554000000 0 1 9 3 1 3 0
initial transponder 570000000 0 2 9 1 1 3 0
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to:

570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

and after that attempt I got

$ dmesg
... as before ...
[ 5171.691406] input: em2880/em2870 remote control as
/devices/virtual/input/input11
[ 5171.737150] em28xx-input.c: remote control handler attached
[ 5171.737157] em28xx #0: Found Terratec Hybrid XS
[ 5191.914643] em28xx_dvb_init
[ 5205.996064] powered down zl10353
[ 5308.636444] tvp5150 0-005c: tvp5150am1 detected.
[ 5712.944647] em28xx_dvb_init
[ 5727.073036] powered down zl10353
Quoted 6 lines

Any hints? Is there any possibility this is a variant of the 0042 not covered by the em28xx-new? (BTW: I tried analogue TV too just recieving white noise with no signal on every channel)

I am willing to debug this but have no clue where to start.

Quoted 7 lines

I have that device here, I guess it's an issue with the zl10353 or mt352 which is in the kernel because it already worked for a very long time :-)
I'll check it within the next 2 days.

-Markus

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list