Can't load firmware - HVR4000
Hi!
I have recently moved my HVR4000 to a new machine, but now I can't load the firmware :-(
I'm running Gentoo 2008.0, kernel 2.6.29 and I've tried both with the drivers included in the kernel and with v4l-drivers outside the kernel but I get the same result :-(
When the machine starts up it loads the correct modules and I get a /dev/dvb/adapter0, but when I for example tries to do a scan I get an error message that it can't load the firmware (see the end of this mail) - what can I have done wrong, is there something with my kernel maybe? I have the firmware in /lib/firmware and I've tried with two different firmwares, one of them is the one I used eralier on the other installation ...
Any hints?
Best regards, Lars Fredriksson
dmesg output;
-----
[ 743.541920] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)... [ 743.541927] i2c-adapter i2c-2: firmware: requesting dvb-fe-cx24116.fw [ 743.541945] ------------[ cut here ]------------ [ 743.541948] WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x2a/0x36() [ 743.541950] Hardware name: M61SME-S2L [ 743.541952] sysfs: duplicate filename 'i2c-2' can not be created [ 743.541954] Modules linked in: cx22702 isl6421 cx24116 cx88_dvb cx88_vp3054_i2c videobuf_dvb dvb_core wm8775 tuner_simple tuner_types tda9887 tda8290 tuner cx8800 cx88_alsa cx8802 cx88xx ir_common v4l2_common videodev v4l1_compat tveeprom videobuf_dma_sg videobuf_core btcx_risc [ 743.541972] Pid: 4043, comm: kdvb-ad-0-fe-0 Tainted: G W 2.6.29 #1 [ 743.541974] Call Trace: [ 743.541980] [<c102580b>] warn_slowpath+0x74/0x8a [ 743.541985] [<c114cc4d>] ? idr_get_empty_slot+0x155/0x230 [ 743.541989] [<c114cdfe>] ? ida_get_new_above+0xd6/0x153 [ 743.541993] [<c108ef1b>] ? wait_on_inode+0x24/0x2a [ 743.541996] [<c108efd6>] ? ifind+0x45/0x57 [ 743.542000] [<c10bbbe1>] sysfs_add_one+0x2a/0x36 [ 743.542014] [<c10bc050>] create_dir+0x43/0x68 [ 743.542017] [<c10bc0a2>] sysfs_create_dir+0x2d/0x41 [ 743.542021] [<c114d772>] ? kobject_get+0x12/0x17 [ 743.542024] [<c114d827>] kobject_add_internal+0xb0/0x154 [ 743.542027] [<c114d976>] kobject_add_varg+0x35/0x41 [ 743.542030] [<c114dce8>] kobject_add+0x49/0x4f [ 743.542034] [<c11d8669>] device_add+0x73/0x40d [ 743.542037] [<c114d5a2>] ? kobject_init_internal+0x12/0x28 [ 743.542040] [<c114d60a>] ? kobject_init+0x35/0x5a [ 743.542043] [<c11d8a15>] device_register+0x12/0x15 [ 743.542046] [<c11dddbb>] _request_firmware+0x177/0x346 [ 743.542051] [<c11de003>] request_firmware+0xa/0xc [ 743.542056] [<f7d86525>] cx24116_cmd_execute+0xa5/0x528 [cx24116] [ 743.542063] [<c12a8d59>] ? bit_xfer+0x391/0x39c [ 743.542067] [<f7d870fd>] cx24116_sleep+0x40/0x82 [cx24116] [ 743.542071] [<f7d8f0b6>] ? isl6421_set_voltage+0x5f/0x6c [isl6421] [ 743.542084] [<f7d5e3bd>] dvb_frontend_thread+0x44c/0x480 [dvb_core] [ 743.542089] [<c1035405>] ? autoremove_wake_function+0x0/0x33 [ 743.542099] [<f7d5df71>] ? dvb_frontend_thread+0x0/0x480 [dvb_core] [ 743.542103] [<c1035331>] kthread+0x3b/0x62 [ 743.542106] [<c10352f6>] ? kthread+0x0/0x62 [ 743.542110] [<c10036cb>] kernel_thread_helper+0x7/0x10 [ 743.542113] ---[ end trace 9ed00f8504e5c157 ]--- [ 743.542118] kobject_add_internal failed for i2c-2 with -EEXIST, don't try to register things with the same name in the same directory. [ 743.542122] Pid: 4043, comm: kdvb-ad-0-fe-0 Tainted: G W 2.6.29 #1 [ 743.542124] Call Trace: [ 743.542126] [<c114d893>] kobject_add_internal+0x11c/0x154 [ 743.542130] [<c114d976>] kobject_add_varg+0x35/0x41 [ 743.542133] [<c114dce8>] kobject_add+0x49/0x4f [ 743.542135] [<c11d8669>] device_add+0x73/0x40d [ 743.542138] [<c114d5a2>] ? kobject_init_internal+0x12/0x28 [ 743.542141] [<c114d60a>] ? kobject_init+0x35/0x5a [ 743.542144] [<c11d8a15>] device_register+0x12/0x15 [ 743.542147] [<c11dddbb>] _request_firmware+0x177/0x346 [ 743.542151] [<c11de003>] request_firmware+0xa/0xc [ 743.542155] [<f7d86525>] cx24116_cmd_execute+0xa5/0x528 [cx24116] [ 743.542159] [<c12a8d59>] ? bit_xfer+0x391/0x39c [ 743.542163] [<f7d870fd>] cx24116_sleep+0x40/0x82 [cx24116] [ 743.542166] [<f7d8f0b6>] ? isl6421_set_voltage+0x5f/0x6c [isl6421] [ 743.542175] [<f7d5e3bd>] dvb_frontend_thread+0x44c/0x480 [dvb_core] [ 743.542179] [<c1035405>] ? autoremove_wake_function+0x0/0x33 [ 743.542188] [<f7d5df71>] ? dvb_frontend_thread+0x0/0x480 [dvb_core] [ 743.542192] [<c1035331>] kthread+0x3b/0x62 [ 743.542195] [<c10352f6>] ? kthread+0x0/0x62 [ 743.542198] [<c10036cb>] kernel_thread_helper+0x7/0x10 [ 743.542201] i2c-adapter i2c-2: fw_register_device: device_register failed [ 743.542204] cx24116_firmware_ondemand: Waiting for firmware upload(2)... [ 743.542206] cx24116_firmware_ondemand: No firmware uploaded (timeout or file not found?) [ 743.542209] cx24116_cmd_execute(): Unable initialise the firmware
-----
Quoted 9 lines · Lars Fredriksson
Hi!
I have recently moved my HVR4000 to a new machine, but now I can't load the firmware :-(
I'm running Gentoo 2008.0, kernel 2.6.29 and I've tried both with the drivers included in the kernel and with v4l-drivers outside the kernel but I get the same result :-(
Quoted 9 lines
When the machine starts up it loads the correct modules and I get a
/dev/dvb/adapter0, but when I for example tries to do a scan I get an error message that it can't load the firmware (see the end of this mail) - what can I have done wrong, is there something with my kernel maybe? I have the firmware in/lib/firmwareand I've tried with two different firmwares, one of them is the one I used eralier on the other installation ...Any hints?
disable i2c-dev in the kernel ... or blacklist it from loading.
Markus
Quoted 82 lines
Best regards, Lars Fredriksson
dmesg output;
-----
[ 743.541920]cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
[ 743.541927] i2c-adapter i2c-2: firmware: requesting dvb-fe-cx24116.fw [ 743.541945] ------------[ cut here ]------------
[ 743.541948] WARNING: atfs/sysfs/dir.c:462sysfs_add_one+0x2a/0x36() [ 743.541950] Hardware name: M61SME-S2L
[ 743.541952] sysfs: duplicate filename 'i2c-2' can not be created [ 743.541954] Modules linked in: cx22702 isl6421 cx24116cx88_dvbcx88_vp3054_i2cvideobuf_dvbdvb_corewm8775tuner_simpletuner_typestda9887 tda8290 tuner cx8800cx88_alsacx8802 cx88xxir_commonv4l2_commonvideodevv4l1_compattveepromvideobuf_dma_sgvideobuf_corebtcx_risc[ 743.541972] Pid: 4043, comm: kdvb-ad-0-fe-0 Tainted: G W 2.6.29 #1
[ 743.541974] Call Trace:
[ 743.541980] [<c102580b>]warn_slowpath+0x74/0x8a
[ 743.541985] [<c114cc4d>] ?idr_get_empty_slot+0x155/0x230
[ 743.541989] [<c114cdfe>] ?ida_get_new_above+0xd6/0x153
[ 743.541993] [<c108ef1b>] ?wait_on_inode+0x24/0x2a
[ 743.541996] [<c108efd6>] ?ifind+0x45/0x57
[ 743.542000] [<c10bbbe1>]sysfs_add_one+0x2a/0x36
[ 743.542014] [<c10bc050>]create_dir+0x43/0x68
[ 743.542017] [<c10bc0a2>]sysfs_create_dir+0x2d/0x41
[ 743.542021] [<c114d772>] ?kobject_get+0x12/0x17
[ 743.542024] [<c114d827>]kobject_add_internal+0xb0/0x154
[ 743.542027] [<c114d976>]kobject_add_varg+0x35/0x41
[ 743.542030] [<c114dce8>]kobject_add+0x49/0x4f
[ 743.542034] [<c11d8669>]device_add+0x73/0x40d
[ 743.542037] [<c114d5a2>] ?kobject_init_internal+0x12/0x28
[ 743.542040] [<c114d60a>] ?kobject_init+0x35/0x5a
[ 743.542043] [<c11d8a15>]device_register+0x12/0x15
[ 743.542046] [<c11dddbb>]_request_firmware+0x177/0x346
[ 743.542051] [<c11de003>]request_firmware+0xa/0xc
[ 743.542056] [<f7d86525>]cx24116_cmd_execute+0xa5/0x528[cx24116] [ 743.542063] [<c12a8d59>] ?bit_xfer+0x391/0x39c
[ 743.542067] [<f7d870fd>]cx24116_sleep+0x40/0x82[cx24116]
[ 743.542071] [<f7d8f0b6>] ?isl6421_set_voltage+0x5f/0x6c[isl6421] [ 743.542084] [<f7d5e3bd>]dvb_frontend_thread+0x44c/0x480[dvb_core] [ 743.542089] [<c1035405>] ?autoremove_wake_function+0x0/0x33[ 743.542099] [<f7d5df71>] ?dvb_frontend_thread+0x0/0x480[dvb_core] [ 743.542103] [<c1035331>]kthread+0x3b/0x62
[ 743.542106] [<c10352f6>] ?kthread+0x0/0x62
[ 743.542110] [<c10036cb>]kernel_thread_helper+0x7/0x10
[ 743.542113] ---[ end trace9ed00f8504e5c157]---
[ 743.542118]kobject_add_internalfailed for i2c-2 with-EEXIST, don't try to register things with the same name in the same directory.
[ 743.542122] Pid: 4043, comm: kdvb-ad-0-fe-0 Tainted: G W 2.6.29 #1
[ 743.542124] Call Trace:
[ 743.542126] [<c114d893>]kobject_add_internal+0x11c/0x154
[ 743.542130] [<c114d976>]kobject_add_varg+0x35/0x41
[ 743.542133] [<c114dce8>]kobject_add+0x49/0x4f
[ 743.542135] [<c11d8669>]device_add+0x73/0x40d
[ 743.542138] [<c114d5a2>] ?kobject_init_internal+0x12/0x28
[ 743.542141] [<c114d60a>] ?kobject_init+0x35/0x5a
[ 743.542144] [<c11d8a15>]device_register+0x12/0x15
[ 743.542147] [<c11dddbb>]_request_firmware+0x177/0x346
[ 743.542151] [<c11de003>]request_firmware+0xa/0xc
[ 743.542155] [<f7d86525>]cx24116_cmd_execute+0xa5/0x528[cx24116] [ 743.542159] [<c12a8d59>] ?bit_xfer+0x391/0x39c
[ 743.542163] [<f7d870fd>]cx24116_sleep+0x40/0x82[cx24116]
[ 743.542166] [<f7d8f0b6>] ?isl6421_set_voltage+0x5f/0x6c[isl6421] [ 743.542175] [<f7d5e3bd>]dvb_frontend_thread+0x44c/0x480[dvb_core] [ 743.542179] [<c1035405>] ?autoremove_wake_function+0x0/0x33[ 743.542188] [<f7d5df71>] ?dvb_frontend_thread+0x0/0x480[dvb_core] [ 743.542192] [<c1035331>]kthread+0x3b/0x62
[ 743.542195] [<c10352f6>] ?kthread+0x0/0x62
[ 743.542198] [<c10036cb>]kernel_thread_helper+0x7/0x10
[ 743.542201] i2c-adapter i2c-2:fw_register_device:device_registerfailed [ 743.542204]cx24116_firmware_ondemand: Waiting for firmware upload(2)... [ 743.542206]cx24116_firmware_ondemand: No firmware uploaded (timeout or file not found?)
[ 743.542209]cx24116_cmd_execute(): Unable initialise the firmware
-----
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Thanks a lot!
The firmware loads correctly now!
Markus Rechberger skrev:
Quoted 115 lines · Lars Fredriksson
Quoted 10 lines
Hi!
I have recently moved my HVR4000 to a new machine, but now I can't load the firmware :-(
I'm running Gentoo 2008.0, kernel 2.6.29 and I've tried both with the drivers included in the kernel and with v4l-drivers outside the kernel but I get the same result :-(
Quoted 10 lines
When the machine starts up it loads the correct modules and I get a
/dev/dvb/adapter0, but when I for example tries to do a scan I get an error message that it can't load the firmware (see the end of this mail) - what can I have done wrong, is there something with my kernel maybe? I have the firmware in/lib/firmwareand I've tried with two different firmwares, one of them is the one I used eralier on the other installation ...Any hints?
disable i2c-dev in the kernel ... or blacklist it from loading.
Markus
Quoted 76 lines
Best regards, Lars Fredriksson
dmesg output;
-----[ 743.541920] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)... [ 743.541927] i2c-adapter i2c-2: firmware: requesting dvb-fe-cx24116.fw [ 743.541945] ------------[ cut here ]------------ [ 743.541948] WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x2a/0x36() [ 743.541950] Hardware name: M61SME-S2L [ 743.541952] sysfs: duplicate filename 'i2c-2' can not be created [ 743.541954] Modules linked in: cx22702 isl6421 cx24116 cx88_dvb cx88_vp3054_i2c videobuf_dvb dvb_core wm8775 tuner_simple tuner_types tda9887 tda8290 tuner cx8800 cx88_alsa cx8802 cx88xx ir_common v4l2_common videodev v4l1_compat tveeprom videobuf_dma_sg videobuf_core btcx_risc [ 743.541972] Pid: 4043, comm: kdvb-ad-0-fe-0 Tainted: G W 2.6.29 #1 [ 743.541974] Call Trace: [ 743.541980] [<c102580b>] warn_slowpath+0x74/0x8a [ 743.541985] [<c114cc4d>] ? idr_get_empty_slot+0x155/0x230 [ 743.541989] [<c114cdfe>] ? ida_get_new_above+0xd6/0x153 [ 743.541993] [<c108ef1b>] ? wait_on_inode+0x24/0x2a [ 743.541996] [<c108efd6>] ? ifind+0x45/0x57 [ 743.542000] [<c10bbbe1>] sysfs_add_one+0x2a/0x36 [ 743.542014] [<c10bc050>] create_dir+0x43/0x68 [ 743.542017] [<c10bc0a2>] sysfs_create_dir+0x2d/0x41 [ 743.542021] [<c114d772>] ? kobject_get+0x12/0x17 [ 743.542024] [<c114d827>] kobject_add_internal+0xb0/0x154 [ 743.542027] [<c114d976>] kobject_add_varg+0x35/0x41 [ 743.542030] [<c114dce8>] kobject_add+0x49/0x4f [ 743.542034] [<c11d8669>] device_add+0x73/0x40d [ 743.542037] [<c114d5a2>] ? kobject_init_internal+0x12/0x28 [ 743.542040] [<c114d60a>] ? kobject_init+0x35/0x5a [ 743.542043] [<c11d8a15>] device_register+0x12/0x15 [ 743.542046] [<c11dddbb>] _request_firmware+0x177/0x346 [ 743.542051] [<c11de003>] request_firmware+0xa/0xc [ 743.542056] [<f7d86525>] cx24116_cmd_execute+0xa5/0x528 [cx24116] [ 743.542063] [<c12a8d59>] ? bit_xfer+0x391/0x39c [ 743.542067] [<f7d870fd>] cx24116_sleep+0x40/0x82 [cx24116] [ 743.542071] [<f7d8f0b6>] ? isl6421_set_voltage+0x5f/0x6c [isl6421] [ 743.542084] [<f7d5e3bd>] dvb_frontend_thread+0x44c/0x480 [dvb_core] [ 743.542089] [<c1035405>] ? autoremove_wake_function+0x0/0x33 [ 743.542099] [<f7d5df71>] ? dvb_frontend_thread+0x0/0x480 [dvb_core] [ 743.542103] [<c1035331>] kthread+0x3b/0x62 [ 743.542106] [<c10352f6>] ? kthread+0x0/0x62 [ 743.542110] [<c10036cb>] kernel_thread_helper+0x7/0x10 [ 743.542113] ---[ end trace 9ed00f8504e5c157 ]--- [ 743.542118] kobject_add_internal failed for i2c-2 with -EEXIST, don't try to register things with the same name in the same directory. [ 743.542122] Pid: 4043, comm: kdvb-ad-0-fe-0 Tainted: G W 2.6.29 #1 [ 743.542124] Call Trace: [ 743.542126] [<c114d893>] kobject_add_internal+0x11c/0x154 [ 743.542130] [<c114d976>] kobject_add_varg+0x35/0x41 [ 743.542133] [<c114dce8>] kobject_add+0x49/0x4f [ 743.542135] [<c11d8669>] device_add+0x73/0x40d [ 743.542138] [<c114d5a2>] ? kobject_init_internal+0x12/0x28 [ 743.542141] [<c114d60a>] ? kobject_init+0x35/0x5a [ 743.542144] [<c11d8a15>] device_register+0x12/0x15 [ 743.542147] [<c11dddbb>] _request_firmware+0x177/0x346 [ 743.542151] [<c11de003>] request_firmware+0xa/0xc [ 743.542155] [<f7d86525>] cx24116_cmd_execute+0xa5/0x528 [cx24116] [ 743.542159] [<c12a8d59>] ? bit_xfer+0x391/0x39c [ 743.542163] [<f7d870fd>] cx24116_sleep+0x40/0x82 [cx24116] [ 743.542166] [<f7d8f0b6>] ? isl6421_set_voltage+0x5f/0x6c [isl6421] [ 743.542175] [<f7d5e3bd>] dvb_frontend_thread+0x44c/0x480 [dvb_core] [ 743.542179] [<c1035405>] ? autoremove_wake_function+0x0/0x33 [ 743.542188] [<f7d5df71>] ? dvb_frontend_thread+0x0/0x480 [dvb_core] [ 743.542192] [<c1035331>] kthread+0x3b/0x62 [ 743.542195] [<c10352f6>] ? kthread+0x0/0x62 [ 743.542198] [<c10036cb>] kernel_thread_helper+0x7/0x10 [ 743.542201] i2c-adapter i2c-2: fw_register_device: device_register failed [ 743.542204] cx24116_firmware_ondemand: Waiting for firmware upload(2)... [ 743.542206] cx24116_firmware_ondemand: No firmware uploaded (timeout or file not found?) [ 743.542209] cx24116_cmd_execute(): Unable initialise the firmwareQuoted 7 lines
-----
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 1 line
The firmware loads correctly now!
Which devices requires i2c-dev module? I mean if I want to buy new dvb devices in addition of hvr-4000 and hvr-1300, should I then avoid some devices...
Mika
Quoted 6 lines · Mika Laitio
Quoted 1 line
The firmware loads correctly now!
Which devices requires i2c-dev module? I mean if I want to buy new dvb devices in addition of hvr-4000 and hvr-1300, should I then avoid some devices...
no v4l/dvb devices require it, so no reason to worry about it. Markus
Quoted 6 lines
Mika
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html