one dvb-t devices not working with mplayer the other is, what is going wrong?
Hello everybody,
As you may read in my previous thread, i am trying to switch from my em28xx devices to a device that works with gpl compliant upstream kernel source code.
My em28xx devices all played back video and audio only dvb-t channels:
Pinnacle PCTV Hybrid Pro Stick 330e
Terratec Cinergy Hybrid T USB XS
Hauppauge WinTV HVR 900
I build script for this to automate the process, however i now swiched to my dvb-t only usb device:
Afatech AF9015 DVB-T USB2.0 stick
And it with totem-xine it plays the same as the em28xx devices, so the devices does kind of works (see the totem-xine bug, please commit to this bug if you have the same behavior)
# device info http://debian.pastebin.com/d3e942c02
# totem-xine bug http://bugzilla.gnome.org/show_bug.cgi?id=554319
# mplayer issue http://debian.pastebin.com/d34d92e64 ^ anybody have any idea what the heck goes on why doesn't mplayer work with this device, nothing changed in the commands i used.
using:
mplayer
Version: 1:1.0.rc2svn20090330-0.0
linux-image-2.6.29-1-686
Version: 2.6.29-1
Thanks in advance, for any help.
Best regards,
Jelle de Jong
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 36 lines · Jelle de Jong
Hello everybody,
As you may read in my previous thread, i am trying to switch from my em28xx devices to a device that works with gpl compliant upstream kernel source code.
My em28xx devices all played back video and audio only dvb-t channels:
Pinnacle PCTV Hybrid Pro Stick 330e
Terratec Cinergy Hybrid T USB XS
Hauppauge WinTV HVR 900I build script for this to automate the process, however i now swiched to my dvb-t only usb device:
Afatech AF9015 DVB-T USB2.0 stickAnd it with totem-xine it plays the same as the em28xx devices, so the devices does kind of works (see the totem-xine bug, please commit to this bug if you have the same behavior)
# device info http://debian.pastebin.com/d3e942c02# totem-xine bug http://bugzilla.gnome.org/show_bug.cgi?id=554319# mplayer issue http://debian.pastebin.com/d34d92e64 ^ anybody have any idea what the heck goes on why doesn't mplayer work with this device, nothing changed in the commands i used.using:
mplayer
Version: 1:1.0.rc2svn20090330-0.0
linux-image-2.6.29-1-686
Version: 2.6.29-1
Quoted 5 lines
Thanks in advance, for any help.
Best regards,
Jelle de Jong
some more info:
device0 (not working, Afatech AF9013 DVB-T)
http://filebin.ca/ypxkw/mplayer0.log
device1 (working, Micronas DRX3973D DVB-T, em28xx, markus not gpl code)
http://filebin.ca/zecdjm/mplayer1.log
device2 (working, Zarlink MT352 DVB-T, em28xx, markus not gpl code)
http://filebin.ca/fzxtcx/mplayer2.log
All devices work with totem-xine but only the em28xx devices works with mplayer, whats going on?
Best reagards,
Jelle de Jong
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 48 lines · Jelle de Jong
Quoted 36 lines · Jelle de Jong
Hello everybody,
As you may read in my previous thread, i am trying to switch from my em28xx devices to a device that works with gpl compliant upstream kernel source code.
My em28xx devices all played back video and audio only dvb-t channels:
Pinnacle PCTV Hybrid Pro Stick 330e
Terratec Cinergy Hybrid T USB XS
Hauppauge WinTV HVR 900I build script for this to automate the process, however i now swiched to my dvb-t only usb device:
Afatech AF9015 DVB-T USB2.0 stickAnd it with totem-xine it plays the same as the em28xx devices, so the devices does kind of works (see the totem-xine bug, please commit to this bug if you have the same behavior)
# device info http://debian.pastebin.com/d3e942c02# totem-xine bug http://bugzilla.gnome.org/show_bug.cgi?id=554319# mplayer issue http://debian.pastebin.com/d34d92e64 ^ anybody have any idea what the heck goes on why doesn't mplayer work with this device, nothing changed in the commands i used.using:
mplayer
Version: 1:1.0.rc2svn20090330-0.0
linux-image-2.6.29-1-686
Version: 2.6.29-1Quoted 5 lines
Thanks in advance, for any help.
Best regards,
Jelle de Jong
some more info:
device0 (not working, Afatech AF9013 DVB-T)
http://filebin.ca/ypxkw/mplayer0.log
Quoted 9 lines
device1 (working, Micronas DRX3973D DVB-T, em28xx, markus not gpl code)
http://filebin.ca/zecdjm/mplayer1.logdevice2 (working, Zarlink MT352 DVB-T, em28xx, markus not gpl code)
http://filebin.ca/fzxtcx/mplayer2.logAll devices work with totem-xine but only the em28xx devices works with mplayer, whats going on?
Anybody?
Best regards,
Jelle
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 58 lines · Jelle de Jong
Quoted 47 lines · Jelle de Jong
Quoted 36 lines · Jelle de Jong
Hello everybody,
As you may read in my previous thread, i am trying to switch from my em28xx devices to a device that works with gpl compliant upstream kernel source code.
My em28xx devices all played back video and audio only dvb-t channels:
Pinnacle PCTV Hybrid Pro Stick 330e
Terratec Cinergy Hybrid T USB XS
Hauppauge WinTV HVR 900I build script for this to automate the process, however i now swiched to my dvb-t only usb device:
Afatech AF9015 DVB-T USB2.0 stickAnd it with totem-xine it plays the same as the em28xx devices, so the devices does kind of works (see the totem-xine bug, please commit to this bug if you have the same behavior)
# device info http://debian.pastebin.com/d3e942c02# totem-xine bug http://bugzilla.gnome.org/show_bug.cgi?id=554319# mplayer issue http://debian.pastebin.com/d34d92e64 ^ anybody have any idea what the heck goes on why doesn't mplayer work with this device, nothing changed in the commands i used.using:
mplayer
Version: 1:1.0.rc2svn20090330-0.0
linux-image-2.6.29-1-686
Version: 2.6.29-1Quoted 5 lines
Thanks in advance, for any help.
Best regards,
Jelle de Jong
some more info:
device0 (not working, Afatech AF9013 DVB-T)
http://filebin.ca/ypxkw/mplayer0.logQuoted 9 lines
device1 (working, Micronas DRX3973D DVB-T, em28xx, markus not gpl code)
http://filebin.ca/zecdjm/mplayer1.logdevice2 (working, Zarlink MT352 DVB-T, em28xx, markus not gpl code)
http://filebin.ca/fzxtcx/mplayer2.logAll devices work with totem-xine but only the em28xx devices works with mplayer, whats going on?
Quoted 6 lines
Anybody?
Best regards,
Jelle
Would somebody be willing to test this with there device, see the first mail for the commands I used, they are in the attached files.
Being able to use mplayer to listen to dvb-t radio is mandatory for me.
Thanks in advance,
Jelle
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 62 lines · Jelle de Jong
Quoted 61 lines · Jelle de Jong
Quoted 47 lines · Jelle de Jong
Quoted 36 lines · Jelle de Jong
Hello everybody,
As you may read in my previous thread, i am trying to switch from my em28xx devices to a device that works with gpl compliant upstream kernel source code.
My em28xx devices all played back video and audio only dvb-t channels:
Pinnacle PCTV Hybrid Pro Stick 330e
Terratec Cinergy Hybrid T USB XS
Hauppauge WinTV HVR 900I build script for this to automate the process, however i now swiched to my dvb-t only usb device:
Afatech AF9015 DVB-T USB2.0 stickAnd it with totem-xine it plays the same as the em28xx devices, so the devices does kind of works (see the totem-xine bug, please commit to this bug if you have the same behavior)
# device info http://debian.pastebin.com/d3e942c02# totem-xine bug http://bugzilla.gnome.org/show_bug.cgi?id=554319# mplayer issue http://debian.pastebin.com/d34d92e64 ^ anybody have any idea what the heck goes on why doesn't mplayer work with this device, nothing changed in the commands i used.using:
mplayer
Version: 1:1.0.rc2svn20090330-0.0
linux-image-2.6.29-1-686
Version: 2.6.29-1Quoted 5 lines
Thanks in advance, for any help.
Best regards,
Jelle de Jong
some more info:
device0 (not working, Afatech AF9013 DVB-T)
http://filebin.ca/ypxkw/mplayer0.logQuoted 9 lines
device1 (working, Micronas DRX3973D DVB-T, em28xx, markus not gpl code)
http://filebin.ca/zecdjm/mplayer1.logdevice2 (working, Zarlink MT352 DVB-T, em28xx, markus not gpl code)
http://filebin.ca/fzxtcx/mplayer2.logAll devices work with totem-xine but only the em28xx devices works with mplayer, whats going on?
Anybody?
Best regards,
Quoted 7 lines
Quoted 2 lines
Jelle
Would somebody be willing to test this with there device, see the first mail for the commands I used, they are in the attached files.
Being able to use mplayer to listen to dvb-t radio is mandatory for me.
I use tzap & mplayer always when testing driver. Never seen troubles you have. And I have very many AF9015 devices. How did you launch mplayer?
Antti
Signature · 6 lines
http://palosaari.fi/ -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 68 lines · Antti Palosaari
Quoted 67 lines · Jelle de Jong
Quoted 54 lines · Jelle de Jong
Quoted 53 lines · Jelle de Jong
Quoted 36 lines · Jelle de Jong
Hello everybody,
As you may read in my previous thread, i am trying to switch from my em28xx devices to a device that works with gpl compliant upstream kernel source code.
My em28xx devices all played back video and audio only dvb-t channels:
Pinnacle PCTV Hybrid Pro Stick 330e
Terratec Cinergy Hybrid T USB XS
Hauppauge WinTV HVR 900I build script for this to automate the process, however i now swiched to my dvb-t only usb device:
Afatech AF9015 DVB-T USB2.0 stickAnd it with totem-xine it plays the same as the em28xx devices, so the devices does kind of works (see the totem-xine bug, please commit to this bug if you have the same behavior)
# device info http://debian.pastebin.com/d3e942c02# totem-xine bug http://bugzilla.gnome.org/show_bug.cgi?id=554319# mplayer issue http://debian.pastebin.com/d34d92e64 ^ anybody have any idea what the heck goes on why doesn't mplayer work with this device, nothing changed in the commands i used.using:
mplayer
Version: 1:1.0.rc2svn20090330-0.0
linux-image-2.6.29-1-686
Version: 2.6.29-1Quoted 5 lines
Thanks in advance, for any help.
Best regards,
Jelle de Jong
some more info:
device0 (not working, Afatech AF9013 DVB-T)
http://filebin.ca/ypxkw/mplayer0.logdevice1 (working, Micronas DRX3973D DVB-T, em28xx, markus not gpl code)
http://filebin.ca/zecdjm/mplayer1.logdevice2 (working, Zarlink MT352 DVB-T, em28xx, markus not gpl code)
http://filebin.ca/fzxtcx/mplayer2.logQuoted 9 lines
Quoted 3 lines
All devices work with totem-xine but only the em28xx devices works with mplayer, whats going on?
Anybody?
Best regards,
Jelle
Would somebody be willing to test this with there device, see the first mail for the commands I used, they are in the attached files.
Quoted 6 lines
Quoted 1 line
Being able to use mplayer to listen to dvb-t radio is mandatory for me.
I use tzap & mplayer always when testing driver. Never seen troubles you have. And I have very many AF9015 devices. How did you launch mplayer?
Antti
I don't use tzap directly.
This is what I do:
# step 1: I use wscan to to make a channel list, there are some serious issues under Linux that I cant solve but like to know what is being done about is. The wscan tool cant get the signal strength of the channel it found, so it may find duplicated channels on multiple frequencies with different strengths. wscan should be able to eliminate all the duplicated channels with inferiour quality. But there is no API in v4l to do this.
~/.wscan/wscan -t 3 -E 0 -O 0 -X tzap > ~/.wscan/channels.conf cp --verbose ~/.wscan/channels.conf ~/.mplayer/channels.conf
# step 2: I run the mplayer command to play one of the stream /usr/bin/mplayer -dvbin timeout=10 dvb://"3FM(Digitenne)"
I automated this scanning and playing system with scripts, they are attached together with the logs of the commands I run.
These systems work with the em28xx devices but not with the AF9015
Thanks in advance,
Best regards,
Jelle
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 87 lines · Jelle de Jong
Quoted 65 lines · Antti Palosaari
Quoted 64 lines · Jelle de Jong
Quoted 63 lines · Jelle de Jong
Quoted 47 lines · Jelle de Jong
Quoted 36 lines · Jelle de Jong
Hello everybody,
As you may read in my previous thread, i am trying to switch from my em28xx devices to a device that works with gpl compliant upstream kernel source code.
My em28xx devices all played back video and audio only dvb-t channels:
Pinnacle PCTV Hybrid Pro Stick 330e
Terratec Cinergy Hybrid T USB XS
Hauppauge WinTV HVR 900I build script for this to automate the process, however i now swiched to my dvb-t only usb device:
Afatech AF9015 DVB-T USB2.0 stickAnd it with totem-xine it plays the same as the em28xx devices, so the devices does kind of works (see the totem-xine bug, please commit to this bug if you have the same behavior)
# device info http://debian.pastebin.com/d3e942c02# totem-xine bug http://bugzilla.gnome.org/show_bug.cgi?id=554319# mplayer issue http://debian.pastebin.com/d34d92e64 ^ anybody have any idea what the heck goes on why doesn't mplayer work with this device, nothing changed in the commands i used.using:
mplayer
Version: 1:1.0.rc2svn20090330-0.0
linux-image-2.6.29-1-686
Version: 2.6.29-1Quoted 5 lines
Thanks in advance, for any help.
Best regards,
Jelle de Jong
some more info:
device0 (not working, Afatech AF9013 DVB-T)
http://filebin.ca/ypxkw/mplayer0.logQuoted 9 lines
device1 (working, Micronas DRX3973D DVB-T, em28xx, markus not gpl code)
http://filebin.ca/zecdjm/mplayer1.logdevice2 (working, Zarlink MT352 DVB-T, em28xx, markus not gpl code)
http://filebin.ca/fzxtcx/mplayer2.logAll devices work with totem-xine but only the em28xx devices works with mplayer, whats going on?
Anybody?
Best regards,
Jelle
Quoted 8 lines
Quoted 4 lines
Would somebody be willing to test this with there device, see the first mail for the commands I used, they are in the attached files.
Being able to use mplayer to listen to dvb-t radio is mandatory for me.
I use tzap& mplayer always when testing driver. Never seen troubles you have. And I have very many AF9015 devices. How did you launch mplayer?
Antti
I don't use tzap directly.
This is what I do:
# step 1: I use wscan to to make a channel list, there are some serious issues under Linux that I cant solve but like to know what is being done about is. The wscan tool cant get the signal strength of the channel it found, so it may find duplicated channels on multiple frequencies with different strengths. wscan should be able to eliminate all the duplicated channels with inferiour quality. But there is no API in v4l to do this.
Quoted 5 lines
~/.wscan/wscan -t 3 -E 0 -O 0 -X tzap>
~/.wscan/channels.confcp --verbose~/.wscan/channels.conf~/.mplayer/channels.conf# step 2: I run the mplayer command to play one of the stream /usr/bin/mplayer -dvbin timeout=10 dvb://"3FM(Digitenne)"
Works just OK here.
Quoted 2 lines
I automated this scanning and playing system with scripts, they are attached together with the logs of the commands I run.
device0.log
AF9015: you are using very old firmware. Otherwise it seems to be OK.
device3.log
em28xx: crashes the Kernel => sure have problems. Are you mixing the drivers from v4l-dvb and from mcentral.de?
Quoted 1 line
These systems work with the em28xx devices but not with the AF9015
I think the reason is that you have tainted your Kernel with em28xx drivers which makes it crashing. Please install clean v4l-dvb from linuxtv.org, install new firmware reboot machine and test again.
regards
Antti
Signature · 6 lines
http://palosaari.fi/ -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 108 lines · Antti Palosaari
Quoted 86 lines · Jelle de Jong
Quoted 65 lines · Antti Palosaari
Quoted 64 lines · Jelle de Jong
Quoted 63 lines · Jelle de Jong
Quoted 47 lines · Jelle de Jong
Quoted 36 lines · Jelle de Jong
Hello everybody,
As you may read in my previous thread, i am trying to switch from my em28xx devices to a device that works with gpl compliant upstream kernel source code.
My em28xx devices all played back video and audio only dvb-t channels:
Pinnacle PCTV Hybrid Pro Stick 330e
Terratec Cinergy Hybrid T USB XS
Hauppauge WinTV HVR 900I build script for this to automate the process, however i now swiched to my dvb-t only usb device:
Afatech AF9015 DVB-T USB2.0 stickAnd it with totem-xine it plays the same as the em28xx devices, so the devices does kind of works (see the totem-xine bug, please commit to this bug if you have the same behavior)
# device info http://debian.pastebin.com/d3e942c02# totem-xine bug http://bugzilla.gnome.org/show_bug.cgi?id=554319# mplayer issue http://debian.pastebin.com/d34d92e64 ^ anybody have any idea what the heck goes on why doesn't mplayer work with this device, nothing changed in the commands i used.using:
mplayer
Version: 1:1.0.rc2svn20090330-0.0
linux-image-2.6.29-1-686
Version: 2.6.29-1Quoted 5 lines
Thanks in advance, for any help.
Best regards,
Jelle de Jong
some more info:
device0 (not working, Afatech AF9013 DVB-T)
http://filebin.ca/ypxkw/mplayer0.logQuoted 9 lines
device1 (working, Micronas DRX3973D DVB-T, em28xx, markus not gpl code)
http://filebin.ca/zecdjm/mplayer1.logdevice2 (working, Zarlink MT352 DVB-T, em28xx, markus not gpl code)
http://filebin.ca/fzxtcx/mplayer2.logAll devices work with totem-xine but only the em28xx devices works with mplayer, whats going on?
Anybody?
Best regards,
Jelle
Quoted 8 lines
Quoted 4 lines
Would somebody be willing to test this with there device, see the first mail for the commands I used, they are in the attached files.
Being able to use mplayer to listen to dvb-t radio is mandatory for me.
I use tzap& mplayer always when testing driver. Never seen troubles you have. And I have very many AF9015 devices. How did you launch mplayer?
Antti
I don't use tzap directly.
This is what I do:
# step 1: I use wscan to to make a channel list, there are some serious issues under Linux that I cant solve but like to know what is being done about is. The wscan tool cant get the signal strength of the channel it found, so it may find duplicated channels on multiple frequencies with different strengths. wscan should be able to eliminate all the duplicated channels with inferiour quality. But there is no API in v4l to do this.Quoted 5 lines
~/.wscan/wscan -t 3 -E 0 -O 0 -X tzap>
~/.wscan/channels.confcp --verbose~/.wscan/channels.conf~/.mplayer/channels.conf# step 2: I run the mplayer command to play one of the stream /usr/bin/mplayer -dvbin timeout=10 dvb://"3FM(Digitenne)"Works just OK here.
Quoted 2 lines
I automated this scanning and playing system with scripts, they are attached together with the logs of the commands I run.
device0.log
AF9015: you are using very old firmware. Otherwise it seems to be OK.device3.log
em28xx: crashes the Kernel => sure have problems. Are you mixing the drivers from v4l-dvb and from mcentral.de?Quoted 1 line
These systems work with the em28xx devices but not with the AF9015
Quoted 6 lines
I think the reason is that you have tainted your Kernel with em28xx drivers which makes it crashing. Please install clean v4l-dvb from linuxtv.org, install new firmware reboot machine and test again.
regards
Antti
Hmm, I used the latest Debian kernel available in unstable and experimental, so I used the stock kernel. If this is to old I cant really
help this and have to wait until Debian releases a new kernel. There is
no residue in my current kernel of any em28xx code its a complete clean stock Debian kernel.
I don't know about the age of the firmware, but I believe its extracted from the kernel code it tells me:
[ 4689.481452] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' [ 4689.975618] af9013: firmware version:4.65.0
Ignore the em28xx devices they have proprietary code, and is not mainstream developed, no use wasting energy on that. Been there, done that.
What is your kernel and firmware version? Is there a way to easily add a newer firmware file without recompilation?
Best regards,
Jelle
[ 2264.136350] usb 1-3.2: new full speed USB device using ehci_hcd and address 6 [ 2264.238323] usb 1-3.2: New USB device found, idVendor=04e6, idProduct=5115 [ 2264.238331] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 2264.238337] usb 1-3.2: Product: SCR33x USB Smart Card Reader [ 2264.238341] usb 1-3.2: Manufacturer: SCM Microsystems Inc. [ 2264.238345] usb 1-3.2: SerialNumber: 21120618201041 [ 2264.238546] usb 1-3.2: configuration #1 chosen from 1 choice [ 4689.260061] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 4689.396005] usb 1-2: New USB device found, idVendor=15a4, idProduct=9016 [ 4689.396032] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4689.396040] usb 1-2: Product: DVB-T [ 4689.396044] usb 1-2: Manufacturer: Afatech [ 4689.396250] usb 1-2: configuration #1 chosen from 1 choice [ 4689.399867] Afatech DVB-T: Fixing fullspeed to highspeed interval: 16 -> 8 [ 4689.412913] input: Afatech DVB-T as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.1/input/input12 [ 4689.449341] generic-usb 0003:15A4:9016.0004: input,hidraw3: USB HID v1.01 Keyboard [Afatech DVB-T] on usb-0000:00:1d.7-2/input1 [ 4689.466744] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware [ 4689.466756] usb 1-2: firmware: requesting dvb-usb-af9015.fw [ 4689.481452] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' [ 4689.535280] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state. [ 4689.535371] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 4689.535780] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) [ 4689.975618] af9013: firmware version:4.65.0 [ 4689.980123] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 4690.012128] MT2060: successfully identified (IF1 = 1220) [ 4690.483877] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected. [ 4690.492188] usbcore: registered new interface driver dvb_usb_af9015
$ uname -a Linux debian-eeepc 2.6.29-1-686 #1 SMP Fri Apr 17 14:35:16 UTC 2009 i686 GNU/Linux
$ dpkg -l | grep 2.6.29 ii linux-image-2.6.29-1-686 2.6.29-3 Linux 2.6.29 image on PPro/Celeron/PII/PIII/P4 ii linux-libc-dev 2.6.29-3 Linux support headers for userspace development
$ /usr/bin/mplayer -dvbin timeout=10 dvb://"3FM(Digitenne)" MPlayer dev-SVN-r29170Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.
Playing dvb://3FM(Digitenne).dvb_tune Freq: 722000000
Not able to lock to the signal on the given frequency, timeout: 10 dvb_tune, TUNING FAILED
ERROR, COULDN'T SET CHANNEL 7: Failed to open dvb://3FM(Digitenne).
Exiting... (End of file)
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 10 lines · Jelle de Jong
Hmm, I used the latest Debian kernel available in unstable and experimental, so I used the stock kernel. If this is to old I cant really
help this and have to wait until Debian releases a new kernel. There is
no residue in my current kernel of any em28xx code its a complete clean stock Debian kernel.I don't know about the age of the firmware, but I believe its extracted from the kernel code it tells me:
[ 4689.481452] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' [ 4689.975618] af9013: firmware version:4.65.0
Firmware is not delivered with Kernel. You can download various firmware version from, but newest is the best. If you need remote and you have problems with remote you can test older ones.
http://palosaari.fi/linux/v4l-dvb/firmware/af9015/
Quoted 5 lines
Ignore the em28xx devices they have proprietary code, and is not mainstream developed, no use wasting energy on that. Been there, done that.
What is your kernel and firmware version? Is there a way to easily add a newer firmware file without recompilation?
Yes, it is only file usually in /lib/firmware/
According to attached log it does not lock to the 722000000 MHz. Could you try tzap -r "3FM(Digitenne)" and then mplayer /dev/dvb/adapter0/dvr0 from other window whil tzap is running. tzap should inform if it locks and also some signal values. There could be many reasons why it does not lock, most typical a little too weak signal. Is there any other stream in same frequency which works?
regards
Antti
Signature · 6 lines
http://palosaari.fi/ -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 32 lines · Antti Palosaari
Quoted 10 lines · Jelle de Jong
Hmm, I used the latest Debian kernel available in unstable and experimental, so I used the stock kernel. If this is to old I cant really
help this and have to wait until Debian releases a new kernel. There is
no residue in my current kernel of any em28xx code its a complete clean stock Debian kernel.I don't know about the age of the firmware, but I believe its extracted from the kernel code it tells me:
[ 4689.481452] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' [ 4689.975618] af9013: firmware version:4.65.0Firmware is not delivered with Kernel. You can download various firmware version from, but newest is the best. If you need remote and you have problems with remote you can test older ones.
http://palosaari.fi/linux/v4l-dvb/firmware/af9015/Quoted 5 lines
Ignore the em28xx devices they have proprietary code, and is not mainstream developed, no use wasting energy on that. Been there, done that.
What is your kernel and firmware version? Is there a way to easily add a newer firmware file without recompilation?
Yes, it is only file usually in
/lib/firmware/According to attached log it does not lock to the 722000000 MHz. Could you try tzap -r "3FM(Digitenne)" and then mplayer
/dev/dvb/adapter0/dvr0from other window whil tzap is running. tzap should inform if it locks and also some signal values.
There could be many reasons why it does not lock, most typical a little too weak signal. Is there any other stream in same frequency which works?
Quoted 2 lines
regards
Antti
I updated the firmware, did all my test again, still exactly the same issue! The stream plays with totem-xine but not with mplayer. tzap and mplayer do work. (this all works with em28xx devices)
I attached my logs.
Any ideas, does mplayer works directly with dvb on your side so without tzap:
$ /usr/bin/mplayer -dvbin timeout=10 dvb://"3FM(Digitenne)"
Cheers,
Jelle
$ tzap -r "3FM(Digitenne)" using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/home/jelle/.tzap/channels.conf' tuning to 722000000 Hz video pid 0x0000, audio pid 0x1be6 status 02 | signal a080 | snr 010e | ber 00000000 | unc 00000000 | status 1f | signal a080 | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0078 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0078 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK .... status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK ^C
------------------------------------------------------------------------
$ mplayer /dev/dvb/adapter0/dvr0 MPlayer dev-SVN-r29170Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.
Playing /dev/dvb/adapter0/dvr0.
TS file format detected.
NO VIDEO! AUDIO MPA(pid=7142) NO SUBS (yet)! PROGRAM N. 0
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 160.0 kbit/10.42% (ratio: 20000->192000) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A:8991.0 ( 2:29:51.0) of -0.0 (unknown) 6.7%
Exiting... (Quit)
------------------------------------------------------------------------
$ /usr/bin/mplayer -dvbin timeout=10 dvb://"3FM(Digitenne)" MPlayer dev-SVN-r29170Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.
Playing dvb://3FM(Digitenne).dvb_tune Freq: 722000000
Not able to lock to the signal on the given frequency, timeout: 10 dvb_tune, TUNING FAILED
ERROR, COULDN'T SET CHANNEL 7: Failed to open dvb://3FM(Digitenne).
Exiting... (End of file)
------------------------------------------------------------------------
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw
sudo rm --verbose /lib/firmware/dvb-usb-af9015.fw
removed `/lib/firmware/dvb-usb-af9015.fw'
sudo cp --verbose ~/dvb-usb-af9015.fw /lib/firmware/ /home/jelle/dvb-usb-af9015.fw' -> /lib/firmware/dvb-usb-af9015.fw'
sudo chmod 644 --verbose /lib/firmware/dvb-usb-af9015.fw mode of `/lib/firmware/dvb-usb-af9015.fw' retained as 0644 (rw-r--r--)
------------------------------------------------------------------------
[ 1619.746043] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully deinitialized and disconnected. [ 1746.568052] usb 1-2: new high speed USB device using ehci_hcd and address 8 [ 1746.703983] usb 1-2: New USB device found, idVendor=15a4, idProduct=9016 [ 1746.703991] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1746.703996] usb 1-2: Product: DVB-T [ 1746.704000] usb 1-2: Manufacturer: Afatech [ 1746.704225] usb 1-2: configuration #1 chosen from 1 choice [ 1746.718343] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware [ 1746.718356] usb 1-2: firmware: requesting dvb-usb-af9015.fw [ 1746.735745] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' [ 1746.804024] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state. [ 1746.804114] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1746.804579] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) [ 1747.209976] af9013: firmware version:4.95.0 [ 1747.214477] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 1747.217517] MT2060: successfully identified (IF1 = 1220) [ 1747.691859] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected. [ 1747.706218] Afatech DVB-T: Fixing fullspeed to highspeed interval: 16 -> 8 [ 1747.706934] input: Afatech DVB-T as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.1/input/input14 [ 1747.737351] generic-usb 0003:15A4:9016.0006: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T] on usb-0000:00:1d.7-2/input1
------------------------------------------------------------------------
$ /usr/bin/mplayer -dvbin timeout=10 dvb://"3FM(Digitenne)" MPlayer dev-SVN-r29170Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.
Playing dvb://3FM(Digitenne).dvb_tune Freq: 722000000
Not able to lock to the signal on the given frequency, timeout: 10 dvb_tune, TUNING FAILED
ERROR, COULDN'T SET CHANNEL 7: Failed to open dvb://3FM(Digitenne).
Exiting... (End of file)
------------------------------------------------------------------------
$ tzap -r "3FM(Digitenne)" using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/home/jelle/.tzap/channels.conf' tuning to 722000000 Hz video pid 0x0000, audio pid 0x1be6 status 02 | signal 9040 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal 9040 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0078 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 0078 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK ... status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ffff | snr 010e | ber 00000000 | unc 00000000 | FE_HAS_LOCK ^C
------------------------------------------------------------------------
$ mplayer /dev/dvb/adapter0/dvr0 MPlayer dev-SVN-r29170Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.
Playing /dev/dvb/adapter0/dvr0.
TS file format detected.
NO VIDEO! AUDIO MPA(pid=7142) NO SUBS (yet)! PROGRAM N. 0
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 160.0 kbit/10.42% (ratio: 20000->192000) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A:9344.4 ( 2:35:44.4) of -0.0 (unknown) 48.9%
MPlayer interrupted by signal 2 in module: decode_audio A:9344.5 ( 2:35:44.5) of -0.0 (unknown) 49.2% Exiting... (Quit)
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 2 lines · Jelle de Jong
Any ideas, does mplayer works directly with dvb on your side so without tzap:
$ /usr/bin/mplayer -dvbin timeout=10 dvb://"3FM(Digitenne)"
Because mplayer does not wait enough for demodulator lock. It is set to 800ms in code (if I remember correctly). I don't know what timeout=10 sets, but I think it could be override value got from demod and if this timeout=10 is less than 800ms got from demod we could have a problem. Try to remove it (uses demod value?) or increase it.
regards
Antti
Signature · 6 lines
http://palosaari.fi/ -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list