Add imls utility command
PATCH RESEND v5 1/1 Add imls utility command
---
tools/imls/Makefile new file +86 -0
@@ -0,0 +1,106 @@ +# +# (C) Copyright 2009 Marco Stornelli <[email protected]> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +HOST_CFLAGS = -Wall -pedantic + +# Generated executable files +BIN_FILES-y += imls + +# Source files which exist outside the tools directory +EXT_OBJ_FILES-y += lib_generic/crc32.o +EXT_OBJ_FILES-y += lib_generic/md5.o +EXT_OBJ_FILES-y += lib_generic/sha1.o +EXT_OBJ_FILES-y += common/image.o + +# Source files located in the tools directory +OBJ_FILES-y += imls.o + +# Flattened device tree objects +LIBFDT_OBJ_FILES-y += fdt.o +LIBFDT_OBJ_FILES-y += fdt_ro.o +LIBFDT_OBJ_FILES-y += fdt_rw.o +LIBFDT_OBJ_FILES-y += fdt_strerror.o +LIBFDT_OBJ_FILES-y += fdt_wip.o + +# now $(obj) is defined +SRCS += $(addprefix $(SRCTREE)/,$(EXT_OBJ_FILES-y:.o=.c)) +SRCS += $(addprefix $(SRCTREE)/tools/,$(OBJ_FILES-y:.o=.c)) +SRCS += $(addprefix $(SRCTREE)/libfdt/,$(LIBFDT_OBJ_FILES-y:.o=.c)) +BINS := $(addprefix $(obj),$(sort $(BIN_FILES-y))) +LIBFDT_OBJS := $(addprefix $(obj),$(LIBFDT_OBJ_FILES-y)) + +# +# Use native tools and options +# Define __KERNEL_STRICT_NAMES to prevent typedef overlaps +# +CPPFLAGS = -idirafter $(SRCTREE)/include \ + -idirafter $(OBJTREE)/include2 \ + -idirafter $(OBJTREE)/include \ + -I $(SRCTREE)/libfdt \ + -I $(SRCTREE)/tools \ + -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES +CFLAGS = $(HOST_CFLAGS) $(CPPFLAGS) -O + +# No -pedantic switch to avoid libfdt compilation warnings +FIT_CFLAGS = -Wall $(CPPFLAGS) -O + +CC = $(CROSS_COMPILER)gcc +STRIP = $(CROSS_COMPILER)strip + +ifeq ($(MTD_VERSION),old) +CPPFLAGS += -DMTD_OLD +endif + +all: $(BINS) + +$(obj)imls: $(obj)imls.o $(obj)crc32.o $(obj)image.o $(obj)md5.o \ + $(obj)sha1.o $(LIBFDT_OBJS) + $(CC) $(CFLAGS) -o $@ $^ + $(STRIP) $@ + +# Some files complain if compiled with -pedantic, use FIT_CFLAGS +$(obj)image.o: $(SRCTREE)/common/image.c + $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + +$(obj)imls.o: imls.c + $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + +# Some of the tool objects need to be accessed from outside the tools
directory
+$(obj)%.o: $(SRCTREE)/common/%.c
+ $(CC) -g $(FIT_CFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(SRCTREE)/lib_generic/%.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(SRCTREE)/libfdt/%.c
+ $(CC) -g $(FIT_CFLAGS) -c -o $@ $<
+
+clean:
+ rm -rf *.o imls
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
tools/imls/README new file +47 -0
47 lines not on this page · raw message
of one
+sector:
+
+> imls -o 1 -s 128 -c 65536 /dev/mtd0
+Searching...
+Image Name: foo +Created: Fri Apr 10 18:11:30 2009 +Image Type: Intel x86 Linux Standalone Program (uncompressed) +Data Size: 10716 Bytes = 10.46 kB = 0.01 MB
+Load Address: 00000000
+Entry Point: 00000000
tools/imls/imls.c new file +48 -0
48 lines not on this page · raw message
int len);
+static void usage(void);
+static int image_verify_header(char *ptr, int fd); +static int flash_bad_block(int fd, uint8_t mtd_type, loff_t start); +
+char *cmdname;
+char *devicefile;
+
+unsigned int sectorcount = 0;
+int sflag = 0;
+unsigned int sectoroffset = 0;
+unsigned int sectorsize = 0;
+int cflag = 0;
+
+int main (int argc, char **argv)
+{
+ int fd = -1, err = 0, readbyte = 0, j;
+ struct mtd_info_user mtdinfo;
+ char buf[sizeof(image_header_t)];
+ int found = 0;
+
+ cmdname = *argv;
+
+ while (--argc > 0 && **++argv == '-') {
+ while (*++*argv) {
+ switch (**argv) {
+ case 's':
+ if (--argc <= 0)
+ usage ();
+ sectorcount = (unsigned int)atoi(*++argv);
+ sflag = 1;
+ goto NXTARG;
+ case 'o':
+ if (--argc <= 0)
+ usage ();
+ sectoroffset = (unsigned int)atoi(*++argv);
+ goto NXTARG;
+
+ case 'c':
+ if (--argc <= 0)
+ usage ();
+ sectorsize = (unsigned int)atoi(*++argv);
+ cflag = 1;
+ goto NXTARG;
+ default:
+ usage ();
+ }
+ }
+NXTARG: ;
+ }
+
+ if (argc != 1 || cflag == 0 || sflag == 0)
+ usage();
+
+ devicefile = *argv;
+
+ fd = open(devicefile, O_RDONLY);
+ if (fd < 0) {
+ fprintf (stderr, "%s: Can't open %s: %s\n",
+ cmdname, devicefile, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ err = ioctl(fd, MEMGETINFO, &mtdinfo);
+ if (err < 0) {
+ fprintf(stderr, "%s: Cannot get MTD information: %s\n",cmdname,
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ if (mtdinfo.type != MTD_NORFLASH && mtdinfo.type != MTD_NANDFLASH) {
+ fprintf(stderr, "%s: Unsupported flash type %u\n",
+ cmdname, mtdinfo.type);
+ exit(EXIT_FAILURE);
+ }
+
+ if (sectorsize * sectorcount != mtdinfo.size) {
+ fprintf(stderr, "%s: Partition size (%d) incompatible with "
+ "sector size and count\n", cmdname, mtdinfo.size);
+ exit(EXIT_FAILURE);
+ }
+
+ if (sectorsize * sectoroffset >= mtdinfo.size) {
+ fprintf(stderr, "%s: Partition size (%d) incompatible with "
+ "sector offset given\n", cmdname, mtdinfo.size);
+ exit(EXIT_FAILURE);
+ }
+
+ if (sectoroffset > sectorcount - 1) {
+ fprintf(stderr, "%s: Sector offset cannot be grater than "
+ "sector count minus one\n", cmdname);
+ exit(EXIT_FAILURE);
+ }
+
+ printf("Searching....\n");
+
+ for (j = sectoroffset; j < sectorcount; ++j) {
+
+ if (lseek(fd, j*sectorsize, SEEK_SET) != j*sectorsize) {
+ fprintf(stderr, "%s: lseek failure: %s\n",
+ cmdname, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ err = flash_bad_block(fd, mtdinfo.type, j*sectorsize);
+ if (err < 0)
+ exit(EXIT_FAILURE);
+ if (err)
+ continue; /* Skip and jump to next */
+
+ readbyte = read(fd, buf, sizeof(image_header_t));
+ if (readbyte != sizeof(image_header_t)) {
+ fprintf(stderr, "%s: Can't read from device: %s\n",
+ cmdname, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ if (fdt_check_header(buf)) {
+ /* old-style image */
+ if (image_verify_header(buf, fd)) {
+ found = 1;
+ image_print_contents((image_header_t *)buf);
+ }
+ } else {
+ /* FIT image */
+ fit_print_contents(buf);
+ }
+
+ }
+
+ close(fd);
+
+ if(!found)
+ printf("No images found\n");
+
+ exit(EXIT_SUCCESS);
+}
+
+void usage()
+{
+ fprintf (stderr, "Usage:\n"
+ " %s [-o offset] -c size -s count device\n"
+ " -o ==> number of sectors to use as offset\n" + " -s ==> number of sectors\n" + " -c ==> size of sectors (byte)\n",
+ cmdname);
+
+ exit(EXIT_FAILURE);
+}
+
+static int image_verify_header(char *ptr, int fd)
+{
+ int len, nread;
+ char *data;
+ uint32_t checksum;
+ image_header_t *hdr = (image_header_t *)ptr;
+ char buf[PAGE_SIZE];
+
+ if (image_get_magic(hdr) != IH_MAGIC)
+ return 0;
+
+ data = (char *)hdr;
+ len = image_get_header_size();
+
+ checksum = image_get_hcrc(hdr);
+ hdr->ih_hcrc = htonl(0); /* clear for re-calculation */
+
+ if (crc32(0, data, len) != checksum) {
+ fprintf(stderr,
+ "%s: Maybe image found but it has bad header checksum!\n",
+ cmdname);
+ return 0;
+ }
+
+ len = image_get_size(hdr);
+ checksum = 0;
+
+ while (len > 0) {
+ nread = read(fd, buf, MIN(len,PAGE_SIZE));
+ if (nread != MIN(len,PAGE_SIZE)) {
+ fprintf(stderr,
+ "%s: Error while reading: %s\n",
+ cmdname, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ checksum = crc32(checksum, buf, nread);
+ len -= nread;
+ }
+
+ if (checksum != image_get_dcrc(hdr)) {
+ fprintf (stderr,
+ "%s: Maybe image found but it has corrupted data!\n",
+ cmdname);
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * Test for bad block on NAND, just returns 0 on NOR, on NAND:
+ * 0 - block is good
+ * > 0 - block is bad
+ * < 0 - failed to test
+ */
+static int flash_bad_block(int fd, uint8_t mtd_type, loff_t start) +{
+ if (mtd_type == MTD_NANDFLASH) {
+ int badblock = ioctl(fd, MEMGETBADBLOCK, &start);
+
+ if (badblock < 0) {
+ fprintf(stderr,"%s: Cannot read bad block mark: %s\n",
+ cmdname, strerror(errno));
+ return badblock;
+ }
+
+ if (badblock) {
+ return badblock;
+ }
+ }
+
+ return 0;
+}
PATCH RESEND v5 1/1 Add imls utility command
Dear Marco,
Quoted 1 line · In message <[email protected]> you wrote:
Signed-off-by Marco Stornelli <[email protected]>
Sorry, your patch is corrupt because your mailer wrapped long lines:
...
Quoted 15 lines
tools/imls/Makefile new file +15
-0+all: $(BINS) + +$(obj)imls: $(obj)imls.o $(obj)crc32.o $(obj)image.o $(obj)md5.o \ + $(obj)sha1.o $(LIBFDT_OBJS) + $(CC) $(CFLAGS) -o $@ $^ + $(STRIP) $@ + +# Some files complain if compiled with -pedantic, use FIT_CFLAGS +$(obj)image.o: $(SRCTREE)/common/image.c + $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + +$(obj)imls.o: imls.c + $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + +# Some of the tool objects need to be accessed from outside the tools
Quoted 1 line
directory
^^^^^^^^^^^^^^^^^^
Like here and elsewhere.
Please fix your mailer setup and resubmit.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "To take a significant step forward, you must make a series of finite improvements." - Donald J. Atwood, General Motors