Skip to contentSkip to conversation

sata_sil: enable 32-bit PIO

PATCH Applied Robert Hancock 2 participants 2 messages Apr 14, 2009 – Apr 16, 2009 libata

lore
Share & tools
lore

Robert Hancock

author
#0 lore raw

PATCH 1/1 sata_sil: enable 32-bit PIO

32-bit PIO seems to work fine on sata_sil hardware (tested on SiI3114) and is listed as OK in the Silicon Image datasheets. Enable it.

Signed-off-by Robert Hancock <[email protected]>
drivers/ata/sata_sil.c +1 -1
index e67ce8e..030ec07 100644
@@ -183,7 +183,7 @@ static struct scsi_host_template sil_sht = {
 };
 
 static struct ata_port_operations sil_ops = {
-	.inherits		= &ata_bmdma_port_ops,
+	.inherits		= &ata_bmdma32_port_ops,
 	.dev_config		= sil_dev_config,
 	.set_mode		= sil_set_mode,
 	.bmdma_setup            = sil_bmdma_setup,
Applied
#1 lore raw
Quoted 10 lines · Robert Hancock

32-bit PIO seems to work fine on sata_sil hardware (tested on SiI3114) and is listed as OK in the Silicon Image datasheets. Enable it.

Signed-off-by Robert Hancock <[email protected]>
drivers/ata/sata_sil.c +0 -0
index e67ce8e..030ec07 100644

drivers/ata/sata_sil.c static struct scsi_host_template sil_sht = { · line 189

Quoted 8 lines
drivers/ata/sata_sil.c +1 -1
@@ -183,7 +183,7 @@ static struct scsi_host_template sil_sht = {
 };
 
 static struct ata_port_operations sil_ops = {
-	.inherits		= &ata_bmdma_port_ops,
+	.inherits		= &ata_bmdma32_port_ops,
 	.dev_config		= sil_dev_config,
 	.set_mode		= sil_set_mode,
 	.bmdma_setup            = sil_bmdma_setup,

applied