Skip to contentSkip to conversation

Infos regarding TERRATEC Cinergy HT PCMCIA

linux-dvb Wolfgang Friedl 3 participants 6 messages Apr 27, 2009 – May 11, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hello,

has anyone tested this card (TERRATEC Cinergy HT PCMCIA) or found useful links I could follow?
<http://www.terratec.net/de/produkte/Cinergy_HT_PCMCIA_1599.html>

<http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_HT_PCMCIA>
<http://www.linuxtv.org/pipermail/linux-dvb/2006-October/013898.html>

Googleing around did not bring me further (analogue part should be no problem, with the dvb-t part I am not shure)

kind regards,

Signature · 12 lines
     ###
    #   #
     # #
   Wolfgang
     # #
    #   #Freitag

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected]
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
#1 lore raw

Hi Wolfgang,

Am Montag, den 27.04.2009, 11:23 +0200 schrieb Wolfgang Friedl:

Quoted 6 lines

Hello,

has anyone tested this card (TERRATEC Cinergy HT PCMCIA) or found useful links I could follow?
<http://www.terratec.net/de/produkte/Cinergy_HT_PCMCIA_1599.html>

Quoted 8 lines

<http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_HT_PCMCIA>
<http://www.linuxtv.org/pipermail/linux-dvb/2006-October/013898.html>

Googleing around did not bring me further (analogue part should be no problem, with the dvb-t part I am not shure)

kind regards,

the card was added by Hartmut himself, that is why you don't find much about it on the lists ;)

With "mercurial" installed "hg export 4835" will show his patch.

Analog and DVB-T is enabled for the cardbus device with PCI subsystem 153b:1172.

Cheers,
Hermann

#3 lore raw
In reply to Mathieu Taillefumier

Mathieu Taillefumier schrieb am 10.05.2009 17:37 ---¦

Quoted 17 lines

Hello,

Quoted 9 lines

Hello,

has anyone tested this card (TERRATEC Cinergy HT PCMCIA) or found useful links I could follow?
<http://www.terratec.net/de/produkte/Cinergy_HT_PCMCIA_1599.html>

<http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_HT_PCMCIA>
<http://www.linuxtv.org/pipermail/linux-dvb/2006-October/013898.html>

This card works since I was able to make it work on Fedora and CLFS without any problems. The analogue part works with kdetv and mplayer. The dvb-t part works too without problems with kaffeine for instance so it should work with the dvb-tools. The only thing that needs a little effort is the sound that is not directly send to the sound card. You need to use the sox trick explained in the linuxtv wiki.

Quoted 5 lines
Quoted 2 lines

kind regards,

Best

Mathieu

Hello,

absolutely right, works fine, thank you.
I am sorry I haven't found the time till now to give short message of the status till now (as I use to give when having asked on a list)

DVB-T everything OK (Ubuntu 8.x and Debian testing), analogue works by using this PCI-DMA "trick" you mentionend (sox with alsa and a 22050 audio-rate gave best results) One thing to mention: a few channels come only mute.
<http://www.sasag.ch/angebot/kabelTV.php> (BR and superRTL, are the ones as far as I remember).
It could be, that using a oss=0 option with saa7134 allows, when switching to another, "working" channel, then "v4lctl volume mute off" and switching back, can get you around - I had to few time to test it/was not important enough; this problem seems to be a known issue, I had later found some hits on this.

regards

Signature · 13 lines
     ###
    #   #
     # #
   wolfgang
     # #
    #   #freitag-friedl


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected]
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
#2 lore raw
In reply to Wolfgang Friedl

Hello,

Quoted 9 lines

Hello,

has anyone tested this card (TERRATEC Cinergy HT PCMCIA) or found useful links I could follow?
<http://www.terratec.net/de/produkte/Cinergy_HT_PCMCIA_1599.html>

<http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_HT_PCMCIA>
<http://www.linuxtv.org/pipermail/linux-dvb/2006-October/013898.html>

This card works since I was able to make it work on Fedora and CLFS without any problems. The analogue part works with kdetv and mplayer. The dvb-t part works too without problems with kaffeine for instance so it should work with the dvb-tools. The only thing that needs a little effort is the sound that is not directly send to the sound card. You need to use the sox trick explained in the linuxtv wiki.

Quoted 5 lines

Googleing around did not bring me further (analogue part should be no problem, with the dvb-t part I am not shure)

kind regards,

Best

Mathieu

#4 lore raw
In reply to Wolfgang Freitag-Friedl

Hello,

Quoted 4 lines

absolutely right, works fine, thank you.
I am sorry I haven't found the time till now to give short message of the status till now (as I use to give when having asked on a list)

it is alright

Quoted 12 lines

DVB-T everything OK (Ubuntu 8.x and Debian testing), analogue works by using this PCI-DMA "trick" you mentionend (sox with alsa and a 22050 audio-rate gave best results) One thing to mention: a few channels come only mute.
<http://www.sasag.ch/angebot/kabelTV.php> (BR and superRTL, are the ones as far as I remember).
It could be, that using a oss=0 option with saa7134 allows, when switching to another, "working" channel, then "v4lctl volume mute off" and switching back, can get you around - I had to few time to test it/was not important enough; this problem seems to be a known issue, I had later found some hits on this.

I am not sure to understand. Do you mean that you have two channels with the video but without the sound despite the fact that the sound is not mute or is it something else. Personally, I never had this problem but I am not using my tvcard very often so...

Best

Mathieu

#5 lore raw
Quoted 19 lines · Mathieu Taillefumier

Hello,

Quoted 4 lines

absolutely right, works fine, thank you.
I am sorry I haven't found the time till now to give short message of the status till now (as I use to give when having asked on a list)

it is alright

Quoted 12 lines

DVB-T everything OK (Ubuntu 8.x and Debian testing), analogue works by using this PCI-DMA "trick" you mentionend (sox with alsa and a 22050 audio-rate gave best results) One thing to mention: a few channels come only mute.
<http://www.sasag.ch/angebot/kabelTV.php> (BR and superRTL, are the ones as far as I remember).
It could be, that using a oss=0 option with saa7134 allows, when switching to another, "working" channel, then "v4lctl volume mute off" and switching back, can get you around - I had to few time to test it/was not important enough; this problem seems to be a known issue, I had later found some hits on this.

Quoted 5 lines

I am not sure to understand. Do you mean that you have two channels with the video but without the sound despite the fact that the sound is not mute or is it something else. Personally, I never had this problem but I am not using my tvcard very often so...

Hello Mathieu,

it is: some channels only have the picture (good quality), but no sound.*

Trying "v4lctl volume mute off" "v4lctl volume mute on" "v4lctl volume mute off" (= toggling around) doesn't change, but

change channel to working channel and "toggling" around with the v4lctl volume mute off[/on] does sometimes help.
I am sorry I have so much info for "reproduction".
This phenomenon is true for kdetv as well as for tvtime.

kind regards,

Signature · 17 lines
     ###
    #   #
     # #
   Wolfgang
     # #
    #   #Freitag

* (I guessed it was like:
"In order to solve sound problems (some channels had no sound, or hashed 
sound...)"
<http://www.gentoo-wiki.info/SAA7134#Card_.26_tuner_type>

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected]
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb