Skip to contentSkip to conversation

Update manpage for hid2hci tool from previous patches

PATCH In review Mario Limonciello 2 participants 2 messages May 15, 2009 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

PATCH 3/3 Update manpage for hid2hci tool from previous patches

This brings the manpage up to the current supported options of hid2hci from the previous set of patches submitted.

---
 tools/hid2hci.8 |   18 ++++++++++++------
 1 files changed, 12 insertions(+), 6 deletions(-)

Patch is attached to prevent Exchange mangling.

Signature · 3 lines
Mario Limonciello
*Dell | Linux Engineering*
[email protected]

From a2f4cd4abb3b7d928c36823bcbfd64e89c3da610 Mon Sep 17 00:00:00 2001
From: Mario Limonciello <[email protected]>
Date: Fri, 15 May 2009 14:38:50 -0500
Subject: [PATCH] Update manpage for hid2hci tool from previous patches

---
 tools/hid2hci.8 |   18 ++++++++++++------
 1 files changed, 12 insertions(+), 6 deletions(-)
tools/hid2hci.8 +12 -6
index 6aa9be2..4181314 100644
@@ -14,7 +14,7 @@
 .\"	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 .\"
 .\"
-.TH HID2HCI 8 "JUNE 6, 2003" "" ""
+.TH HID2HCI 8 "MAY 15, 2009" "" ""
 
 .SH NAME
 hid2hci \- Bluetooth HID to HCI mode switching utility
@@ -25,7 +25,7 @@ hid2hci \- Bluetooth HID to HCI mode switching utility
 ]
 .SH DESCRIPTION
 .B hid2hci
-is used to set up switch HID proxy Bluetooth dongle into the HCI
+is used to set up switch supported bluetooth devices into the HCI
 mode and back.
 .SH OPTIONS
 .TP
@@ -35,11 +35,17 @@ Gives a list of possible options.
 .BI -q
 Don't display any messages.
 .TP
-.BI -0
-Switches the device into HCI mode.
+.BI -r [hid,hci]
+Sets the radio mode to switch into
 .TP
-.BI -1
-Switches the device into HID mode.
+.BI -v
+Specifies the 4 digit vendor ID assigned to the device being switched
+.TP
+.BI -p
+Specifies the 4 digit product ID assigned to the device being switched
+.TP
+.BI -m [hidproxy, logitech, dell]
+Which vendor method to use for switching the device.
 .SH AUTHOR
 Written by Marcel Holtmann <[email protected]>.
 .br
Signature · 1 line
1.6.0.4
maintainer
#1 lore raw

Hi Mario,

Quoted 8 lines

This brings the manpage up to the current supported options of hid2hci from the previous set of patches submitted.

---
 tools/hid2hci.8 |   18 ++++++++++++------
 1 files changed, 12 insertions(+), 6 deletions(-)

Patch is attached to prevent Exchange mangling.

you got combine hid2hci.c and hid2hci.8 changes in one patch if you like. Not a hard requirement though :)

Regards

Marcel