Axiom MCF5282 help
Hi All -
I'm new to u-boot and I am running into some issues. I an using the
Axiom 5282lite board and I cannot get the ethernet working.
I have u-boot flashed onto the board, and when I connect the board
to my Linksys WRT54G router, the Link LED on the board constantly flashes, as does the LED for that port on the router.
I assigned an IP to the board, outside the DHCP range, but I cannot
ping the board, and the board cannot ping anything, including the router.
Any ideas?
Speaking of DHCP, does the code support DHCP for the 5282?
Any help you be appreciated.
Thanks
Mark
Mark,
There could be a hardware issue. Is the phy crystal on the board is F25.00 or F25.00P?
Regards,
TsiChung
Quoted 25 lines · Mark Giacobbe
Hi All -
? ?I'm new to u-boot and I am running into some issues. ?I an using the Axiom 5282lite board and I cannot get the ethernet working.
? ?I have u-boot flashed onto the board, and when I connect the board to my Linksys WRT54G router, the Link LED on the board constantly flashes, as does the LED for that port on the router.
? ?I assigned an IP to the board, outside the DHCP range, but I cannot ping the board, and the board cannot ping anything, including the router.
? ?Any ideas?
? ?Speaking of DHCP, does the code support DHCP for the 5282?
Any help you be appreciated.
Thanks
Mark_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Thanks, the crystal (Y2) is FS25.00.
What should it be? I'm thinking it may be a hardware issue also, because uClinux is doing the same thing.
Mark
Quoted 43 lines · TC Liew
Mark,
There could be a hardware issue. Is the phy crystal on the board is F25.00 or F25.00P?
Regards,
TsiChungQuoted 16 lines · Mark Giacobbe
Hi All -
I'm new to u-boot and I am running into some issues. I an using the
Axiom 5282lite board and I cannot get the ethernet working.I have u-boot flashed onto the board, and when I connect the board
to my Linksys WRT54G router, the Link LED on the board constantly flashes, as does the LED for that port on the router.I assigned an IP to the board, outside the DHCP range, but I cannot
ping the board, and the board cannot ping anything, including the router.Any ideas?
Speaking of DHCP, does the code support DHCP for the 5282?
Quoted 10 lines
Any help you be appreciated.
Thanks
Mark_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Thanks
It's the FS25.00. Is this correct?
Thanks
Mark
Quoted 43 lines · TC Liew
Mark,
There could be a hardware issue. Is the phy crystal on the board is F25.00 or F25.00P?
Regards,
TsiChungQuoted 16 lines · Mark Giacobbe
Hi All -
I'm new to u-boot and I am running into some issues. I an using the
Axiom 5282lite board and I cannot get the ethernet working.I have u-boot flashed onto the board, and when I connect the board
to my Linksys WRT54G router, the Link LED on the board constantly flashes, as does the LED for that port on the router.I assigned an IP to the board, outside the DHCP range, but I cannot
ping the board, and the board cannot ping anything, including the router.Any ideas?
Speaking of DHCP, does the code support DHCP for the 5282?
Quoted 10 lines
Any help you be appreciated.
Thanks
Mark_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot