video: Initial support for ADV7180
PATCH 1/1 video: Initial support for ADV7180
This is an initial driver for Analog Devices ADV7180 Video Decoder.
So far it only supports query standard.
Signed-off-by Richard Röjfors <[email protected]>
---
drivers/media/video/adv7180.c +221 -0
@@ -0,0 +1,221 @@ +/* +* adv7180.c Analog Devices ADV7180 video decoder driver +* Copyright (c) 2009 Intel Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/i2c-id.h> +#include <media/v4l2-ioctl.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-i2c-drv.h> + + +#define ADV7180_INPUT_CONTROL_REG 0x00 +#define ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM 0x00 +#define ADV7180_AUTODETECT_ENABLE_REG 0x07 +#define ADV7180_AUTODETECT_DEFAULT 0x7f + + +#define ADV7180_STATUS1_REG 0x10 +#define ADV7180_STATUS1_AUTOD_MASK 0x70 +#define ADV7180_STATUS1_AUTOD_NTSM_M_J 0x00 +#define ADV7180_STATUS1_AUTOD_NTSC_4_43 0x10 +#define ADV7180_STATUS1_AUTOD_PAL_M 0x20 +#define ADV7180_STATUS1_AUTOD_PAL_60 0x30 +#define ADV7180_STATUS1_AUTOD_PAL_B_G 0x40 +#define ADV7180_STATUS1_AUTOD_SECAM 0x50 +#define ADV7180_STATUS1_AUTOD_PAL_COMB 0x60 +#define ADV7180_STATUS1_AUTOD_SECAM_525 0x70 + +#define ADV7180_IDENT_REG 0x11 +#define ADV7180_ID_7180 0x18 + + +static unsigned short normal_i2c[] = {0x42 >>1 ,I2C_CLIENT_END }; + +I2C_CLIENT_INSMOD ; + +struct adv7180_state { +struct v4l2_subdev sd; +}; + +static v4l2_std_id determine_norm (struct i2c_client *client) +{ +u8 status1 =i2c_smbus_read_byte_data (client,ADV7180_STATUS1_REG ); + +switch (status1 &ADV7180_STATUS1_AUTOD_MASK ) { +case ADV7180_STATUS1_AUTOD_NTSM_M_J : +return V4L2_STD_NTSC_M_JP ; +case ADV7180_STATUS1_AUTOD_NTSC_4_43 : +return V4L2_STD_NTSC_443 ; +case ADV7180_STATUS1_AUTOD_PAL_M : +return V4L2_STD_PAL_M ; +case ADV7180_STATUS1_AUTOD_PAL_60 : +return V4L2_STD_PAL_60 ; +case ADV7180_STATUS1_AUTOD_PAL_B_G : +return V4L2_STD_PAL ; +case ADV7180_STATUS1_AUTOD_SECAM : +return V4L2_STD_SECAM ; +case ADV7180_STATUS1_AUTOD_PAL_COMB : +return V4L2_STD_PAL_Nc |V4L2_STD_PAL_N ; +case ADV7180_STATUS1_AUTOD_SECAM_525 : +return V4L2_STD_SECAM ; +default : +return V4L2_STD_UNKNOWN ; + } +} + +static inline struct adv7180_state *to_state (struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7180_state, sd); +} + +static int adv7180_querystd (struct v4l2_subdev *sd,v4l2_std_id *std) +{ +struct i2c_client *client =v4l2_get_subdevdata (sd); + + *(v4l2_std_id *)std =determine_norm (client); +return 0 ; +} + +static int adv7180_g_ctrl (struct v4l2_subdev *sd,struct v4l2_control *ctrl) +{ +return -EINVAL ; +} + +static int adv7180_s_ctrl (struct v4l2_subdev *sd,struct v4l2_control *ctrl) +{ +return -EINVAL ; +} + +static int adv7180_g_chip_ident (struct v4l2_subdev *sd, +struct v4l2_dbg_chip_ident *chip) +{ +struct i2c_client *client =v4l2_get_subdevdata (sd); + +return v4l2_chip_ident_i2c_client (client, chip,V4L2_IDENT_ADV7180 ,0 ); +} + +static int adv7180_log_status (struct v4l2_subdev *sd) +{ +v4l2_info (sd,"Normal operation\n" ); +return 0 ; +} + +static irqreturn_t adv7180_irq (int irq,void *devid) +{ +return IRQ_NONE ; +} + +static const struct v4l2_subdev_video_ops adv7180_video_ops = { + .querystd = adv7180_querystd, +}; + +static const struct v4l2_subdev_core_ops adv7180_core_ops = { + .log_status = adv7180_log_status, + .g_chip_ident = adv7180_g_chip_ident, + .g_ctrl = adv7180_g_ctrl, + .s_ctrl = adv7180_s_ctrl, +}; + +static const struct v4l2_subdev_ops adv7180_ops = { + .core = &adv7180_core_ops, + .video = &adv7180_video_ops, +}; + +/* +* Generic i2c probe +* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' +*/ + +static int adv7180_probe (struct i2c_client *client, +const struct i2c_device_id *id) +{ +struct adv7180_state *state; +struct v4l2_subdev *sd; + +/* Check if the adapter supports the needed features */ +if (!i2c_check_functionality (client->adapter,I2C_FUNC_SMBUS_BYTE_DATA )) +return -EIO ; + +v4l_info (client,"chip found @ 0x%02x (%s)\n" , + client->addr <<1 , client->adapter->name); + + state =kmalloc (sizeof (struct adv7180_state ),GFP_KERNEL ); +if (state ==NULL ) +return -ENOMEM ; + sd = &state->sd; +v4l2_i2c_subdev_init (sd, client, &adv7180_ops); + +/* Initialize adv7180 */ + +/* register interrupt, can be used later */ +if (client->irq >0 ) { +/* we can use IRQ */ +int err =request_irq (client->irq, adv7180_irq,IRQF_SHARED , +"adv7180" , sd); +if (err) { +printk (KERN_ERR "adv7180: Failed to request IRQ\n" ); +v4l2_device_unregister_subdev (sd); +kfree (state); +return err; + } + } + +/* enable autodetection */ +i2c_smbus_write_byte_data (client,ADV7180_INPUT_CONTROL_REG , +ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM ); +i2c_smbus_write_byte_data (client,ADV7180_AUTODETECT_ENABLE_REG , +ADV7180_AUTODETECT_DEFAULT ); +return 0 ; +} + +static int adv7180_remove (struct i2c_client *client) +{ +struct v4l2_subdev *sd =i2c_get_clientdata (client); + +if (client->irq >0 ) +free_irq (client->irq, sd); + +v4l2_device_unregister_subdev (sd); +kfree (to_state (sd)); +return 0 ; +} + +static const struct i2c_device_id adv7180_id[] = { + {"adv7180" ,0 }, + { } +}; +MODULE_DEVICE_TABLE (i2c, adv7180_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name ="adv7180" , + .probe = adv7180_probe, + .remove = adv7180_remove, + .id_table = adv7180_id, +}; + +MODULE_DESCRIPTION ("Analog Devices ADV7180 video decoder driver" ); +MODULE_AUTHOR ("Mocean Laboratories" ); +MODULE_LICENSE ("GPL v2" ); +
drivers/media/video/Kconfig +9 -0
@@ -265,6 +265,15 @@ comment "Video decoders" +config VIDEO_ADV7180 + tristate "Analog Devices ADV7180 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7180 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7180. + config VIDEO_BT819 tristate "BT819A VideoStream decoder" depends on VIDEO_V4L2 && I2C
drivers/media/video/Makefile +1 -0
@@ -49,6 +49,7 @@ obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o +obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o obj-$(CONFIG_VIDEO_BT819) += bt819.o obj-$(CONFIG_VIDEO_BT856) += bt856.o
include/media/v4l2-chip-ident.h +3 -0
@@ -131,6 +131,9 @@/* module adv7175: just ident 7175 */ V4L2_IDENT_ADV7175 =7175 , +/* module adv7180: just ident 7180 */ +V4L2_IDENT_ADV7180 =7180 , +/* module saa7185: just ident 7185 */ V4L2_IDENT_SAA7185 = 7185,