2.6.30-rc8 : Bug while trying to launch a KVM guest
I had a x86_64 machine running 2.6.30-rc7-git4 as a KVM Host. I configured a KVM guest and was able to boot the guest.
On the KVM host i compiled a 2.6.30-rc8 kernel with CONFIG_IMA=y and rebooted the machine into that kernel.
When i tried to launch the KVM guest with 2.6.30-rc8 kernel ran into following BUG.
# qemu-system-x86_64 -hda /local/kvmtest/rhel53.img -m 512 rhel53.img dentry_open failed BUG: unable to handle kernel paging request at ffffffffffffffe5 IP: [<ffffffff802cde9d>] fput+0x8/0x1a PGD 203067 PUD 204067 PMD 0 Oops: 0002 [#2] SMP last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map CPU 1 Modules linked in: kvm_amd kvm ipv6 sr_mod cdrom fuse loop dm_mod ums_cypress bnx2 sg mptctl i2c_piix4 rtc_cmos pcspkr usb_storage button serio_raw rtc_core i2c_core rtc_lib shpchp k8temp pci_hotplug usbhid hid ohci_hcd ehci_hcd sd_mod crc_t10dif usbcore edd ext3 jbd fan thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 3068, comm: qemu-system-x86 Tainted: G D 2.6.30-rc8 #1 BladeCenter LS21 -[79716AA]- RIP: 0010:[<ffffffff802cde9d>] [<ffffffff802cde9d>] fput+0x8/0x1a RSP: 0018:ffff880128d6dd88 EFLAGS: 00010282 RAX: ffffffffffffffe5 RBX: ffff880128d2a580 RCX: 0000000000000ccb RDX: ffff88002803c000 RSI: 0000000000000046 RDI: ffffffffffffffb5 RBP: ffff880128d6dd88 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8800000be360 R11: ffff880128d6db78 R12: ffff88012db6ad60 R13: ffffffffffffffb5 R14: ffff880128d6de48 R15: ffff88012db6ac00 FS: 00007f60db16b6f0(0000) GS:ffff88002803c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffffffffe5 CR3: 0000000128d11000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-system-x86 (pid: 3068, threadinfo ffff880128d6c000, task ffff88012c9f1880) Stack: ffff880128d6ddc8 ffffffff803ac6f1 ffff880128d2a5a8 ffff880126805fc0 0000000000009001 0000000000000004 ffff880128d6de48 ffff88012db6acc0 ffff880128d6de08 ffffffff802d5f3c ffff880128d6de08 0000000000000000 Call Trace: [<ffffffff803ac6f1>] ima_path_check+0x1a5/0x1c3 [<ffffffff802d5f3c>] may_open+0xc1/0x278 [<ffffffff802d8620>] do_filp_open+0x498/0x914 [<ffffffff802abd89>] ? handle_mm_fault+0x35b/0x75e [<ffffffff802cb0c9>] ? fd_install+0x30/0x60 [<ffffffff802e0abd>] ? alloc_fd+0x6d/0x117 [<ffffffff802cb295>] do_sys_open+0x56/0xd6 [<ffffffff802cb33e>] sys_open+0x1b/0x1d [<ffffffff8020ba6b>] system_call_fastpath+0x16/0x1b Code: ff 74 13 41 c7 87 cc 00 00 00 00 00 00 00 4c 89 ff e8 86 43 01 00 41 58 5b 41 5c 41 5d 41 5e 41 5f c9 c3 55 48 8d 47 30 48 89 e5 <f0> 48 ff 08 0f 94 c2 84 d2 74 05 e8 47 fe ff ff c9 c3 55 48 89 RIP [<ffffffff802cde9d>] fput+0x8/0x1a RSP <ffff880128d6dd88> CR2: ffffffffffffffe5 ---[ end trace 65e02cf766f19c9b ]---
Let me know if some more information is required.
Thanks
-Sachin
Signature · 6 lines
--------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India ---------------------------------
Sachin Sant <[email protected]> wrote on 06/05/2009 01:08:00 PM:
Quoted 8 lines
I had a
x86_64machine running 2.6.30-rc7-git4 as a KVM Host. I configured a KVM guest and was able to boot the guest.On the KVM host i compiled a 2.6.30-rc8 kernel with
CONFIG_IMA=yand rebooted the machine into that kernel.When i tried to launch the KVM guest with 2.6.30-rc8 kernel ran into following BUG.
This bug has been addressed in linux-next. Please refer to:
f06dd16a03f6f7f72fab4db03be36e28c28c6fd6 : IMA: Handle dentry_open failures1a62e958fa4aaeeb752311b4f5e16b2a86737b23 : IMA: open all files O_LARGEFILE 04288f42033607099cebf5ca15ce8dcec3a9688b : integrity: ima audit dentry_open failure
The default policy in 2.6.30 measures all files open for read by root. (So starting the VM as root will cause it to be read.) This linux-next patch changes the default behavior so that nothing is measured.
5789ba3bd0a3cd20df5980ebf03358f2eb44fd67 : IMA: Minimal IMA policy and boot param for TCB IMA policy
Mimi Zohar
Quoted 7 lines
# qemu-system-x86_64 -hda /local/kvmtest/rhel53.img -m 512 rhel53.img dentry_open failed BUG: unable to handle kernel paging request at ffffffffffffffe5 IP: [<ffffffff802cde9d>] fput+0x8/0x1a PGD 203067 PUD 204067 PMD 0 Oops: 0002 [#2] SMP last sysfs file:
/sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
Quoted 2 lines
CPU 1
Modules linked in: kvm_amd kvm ipv6 sr_mod cdrom fuse loop dm_mod
ums_cypress
Quoted 1 line
bnx2 sg mptctl
i2c_piix4rtc_cmospcspkrusb_storagebuttonserio_raw
rtc_core
Quoted 1 line
i2c_corertc_libshpchp k8temppci_hotplugusbhid hidohci_hcdehci_hcd
sd_mod
Quoted 1 line
crc_t10difusbcore edd ext3 jbd fan thermal processorthermal_syshwmon
mptsas
Quoted 2 lines
mptscsih mptbase
scsi_transport_sasscsi_mod
Pid: 3068, comm: qemu-system-x86 Tainted: G D 2.6.30-rc8 #1
BladeCenter
Quoted 9 lines
LS21 -[79716AA]-
RIP: 0010:[<ffffffff802cde9d>] [<ffffffff802cde9d>] fput+0x8/0x1a RSP: 0018:ffff880128d6dd88 EFLAGS: 00010282 RAX: ffffffffffffffe5 RBX: ffff880128d2a580 RCX: 0000000000000ccb RDX: ffff88002803c000 RSI: 0000000000000046 RDI: ffffffffffffffb5 RBP: ffff880128d6dd88 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8800000be360 R11: ffff880128d6db78 R12: ffff88012db6ad60 R13: ffffffffffffffb5 R14: ffff880128d6de48 R15: ffff88012db6ac00 FS: 00007f60db16b6f0(0000) GS:ffff88002803c000(0000)
knlGS:0000000000000000
Quoted 6 lines
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:ffffffffffffffe5CR3:0000000128d11000CR4:00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6:00000000ffff0ff0DR7: 0000000000000400 Process qemu-system-x86 (pid: 3068, threadinfoffff880128d6c000, taskffff88012c9f1880)
Quoted 15 lines
Stack: ffff880128d6ddc8 ffffffff803ac6f1 ffff880128d2a5a8 ffff880126805fc0 0000000000009001 0000000000000004 ffff880128d6de48 ffff88012db6acc0 ffff880128d6de08 ffffffff802d5f3c ffff880128d6de08 0000000000000000 Call Trace: [<ffffffff803ac6f1>] ima_path_check+0x1a5/0x1c3 [<ffffffff802d5f3c>] may_open+0xc1/0x278 [<ffffffff802d8620>] do_filp_open+0x498/0x914 [<ffffffff802abd89>] ? handle_mm_fault+0x35b/0x75e [<ffffffff802cb0c9>] ? fd_install+0x30/0x60 [<ffffffff802e0abd>] ? alloc_fd+0x6d/0x117 [<ffffffff802cb295>] do_sys_open+0x56/0xd6 [<ffffffff802cb33e>] sys_open+0x1b/0x1d [<ffffffff8020ba6b>] system_call_fastpath+0x16/0x1b Code: ff 74 13 41 c7 87 cc 00 00 00 00 00 00 00 4c 89 ff e8 86 43 01 00
41 58
Quoted 1 line
5b 41 5c 41 5d 41 5e 41 5f c9 c3 55 48 8d 47 30 48 89 e5 <f0> 48 ff 08
0f 94 c2
Quoted 20 lines
84 d2 74 05 e8 47 fe ff ff c9 c3 55 48 89
RIP [<ffffffff802cde9d>]fput+0x8/0x1a
RSP <ffff880128d6dd88>
CR2:ffffffffffffffe5---[ end trace 65e02cf766f19c9b ]---Let me know if some more information is required.
Thanks
-SachinSignature · 6 lines
--------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India ---------------------------------
Quoted 6 lines · Mimi Zohar
This bug has been addressed in linux-next. Please refer to:
f06dd16a03f6f7f72fab4db03be36e28c28c6fd6: IMA: Handledentry_openfailures1a62e958fa4aaeeb752311b4f5e16b2a86737b23: IMA: open all filesO_LARGEFILE04288f42033607099cebf5ca15ce8dcec3a9688b: integrity: ima auditdentry_openfailure
Quoted 6 lines
The default policy in 2.6.30 measures all files open for read by root. (So starting the VM as root will cause it to be read.) This linux-next patch changes the default behavior so that nothing is measured.
5789ba3bd0a3cd20df5980ebf03358f2eb44fd67: IMA: Minimal IMA policy and boot param for TCB IMA policy
I am able to boot the kvm guest after applying the following two patches.
commit f06dd16a03f6f7f72fab4db03be36e28c28c6fd6
commit 1a62e958fa4aaeeb752311b4f5e16b2a86737b23
Thanks Mimi for the help.
Regards
-Sachin
Signature · 6 lines
--------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India ---------------------------------