Skip to contentSkip to conversation

2.6.30-rc8 does not boot

DISCUSSION Michael Tokarev 2 participants 4 messages Jun 8, 2009

lore
Share & tools
lore
#0 lore raw

Hello.

I just gave 2.6.30-rc a try, taken from Linus git, tag v2.6.29-rc8. And this one does not want to boot on my test machine which is an AMD X2-64 with AMD780G chipset. Neither 64 nor 32bit kernel boots. I even tried in kvm virtual machine, -- same effect. It freezes right after displaying "Verifying BIOS data successful" message -- nothing more is on the screen.

I did `make silentoldconfig' based on my current 2.6.29 configs. In the configs there are the following changes:
- quite some changes in various new/changed drivers (which should not affect what I'm seeing)

- decompression: I've no idea what compression it used before, but `make oldconfig' offered gzip by default which I accepted. Should I try bzip2 instead?

- changed HZ from 100 to 300

- also the following which I don't think I touched:

-X86_INTERNODE_CACHE_BYTES=128
+X86_INTERNODE_CACHE_BYTES=64

-X86_L1_CACHE_BYTES=128
+X86_L1_CACHE_BYTES=64

-X86_L1_CACHE_SHIFT=7
+X86_L1_CACHE_SHIFT=6

I'm trying different compression method for now. If it will solve this issue, my conclusion will be that the default value is wrong and - oh well - expect more reports/questions like this one :)

The rest of the system is not very interesting I think: the kernel config is pretty generic (most stuff is in modules), compiler is default on Debian Lenny (4.3.2-1.1).

Thanks!

/mjt

#1 lore raw
Quoted 28 lines · Michael Tokarev

Hello.

I just gave 2.6.30-rc a try, taken from Linus git, tag v2.6.29-rc8. And this one does not want to boot on my test machine which is an AMD X2-64 with AMD780G chipset. Neither 64 nor 32bit kernel boots. I even tried in kvm virtual machine, -- same effect. It freezes right after displaying "Verifying BIOS data successful" message -- nothing more is on the screen.

I did `make silentoldconfig' based on my current 2.6.29 configs. In the configs there are the following changes:
- quite some changes in various new/changed drivers (which should not affect what I'm seeing)

- decompression: I've no idea what compression it used before, but `make oldconfig' offered gzip by default which I accepted. Should I try bzip2 instead?

- changed HZ from 100 to 300

- also the following which I don't think I touched:

-X86_INTERNODE_CACHE_BYTES=128
+X86_INTERNODE_CACHE_BYTES=64

-X86_L1_CACHE_BYTES=128
+X86_L1_CACHE_BYTES=64

Quoted 6 lines

-X86_L1_CACHE_SHIFT=7
+X86_L1_CACHE_SHIFT=6

I'm trying different compression method for now. If it will solve this issue, my conclusion will be that the default value is wrong and - oh well - expect more reports/questions like this one :)

Ok, compression did not change anything. But now I've a bit more info available. Here's how the boot screen looks like when the boot stops:

Loading kernel ....
Loading initrd ....
BIOS data check successful

PANIC: early exception 0e rip: 10:ffffffff802c9abd error 0 cr2 0

Quoted 3 lines

The rest of the system is not very interesting I think: the kernel config is pretty generic (most stuff is in modules), compiler is default on Debian Lenny (4.3.2-1.1).

Tried two boot loaders: lilo (22.8) and extlinux. With similar effect.

Thanks!

/mjt

#2 lore raw

solved: Re: 2.6.30-rc8 does not boot

[2nd reply to my own email...]

Quoted 10 lines · Michael Tokarev
Quoted 9 lines · Michael Tokarev

Hello.

I just gave 2.6.30-rc a try, taken from Linus git, tag v2.6.29-rc8. And this one does not want to boot on my test machine which is an AMD X2-64 with AMD780G chipset. Neither 64 nor 32bit kernel boots. I even tried in kvm virtual machine, -- same effect. It freezes right after displaying "Verifying BIOS data successful" message -- nothing more is on the screen.

[]

Quoted 5 lines

Loading kernel ....
Loading initrd ....
BIOS data check successful

PANIC: early exception 0e rip: 10:ffffffff802c9abd error 0 cr2 0

It turned out to be an issue with acpi-dsdt-initrd-v0.9c-2.6.29.patch which I forgot to remove from my package when rebuilding the kernel. Reverting that patch solved boot issues and the kernel is now working.

Please excuse me for the noise.

Thanks!

/mjt

#3 lore raw
In reply to Michael Tokarev

2009/6/8 Michael Tokarev <[email protected]>:

Quoted 10 lines
Quoted 9 lines · Michael Tokarev

Hello.

I just gave 2.6.30-rc a try, taken from Linus git, tag v2.6.29-rc8. And this one does not want to boot on my test machine which is an AMD X2-64 with AMD780G chipset.  Neither 64 nor 32bit kernel boots. I even tried in kvm virtual machine, -- same effect.  It freezes right after displaying "Verifying BIOS data successful" message -- nothing more is on the screen.

[...]

Quoted 1 line

PANIC: early exception 0e rip: 10:ffffffff802c9abd error 0 cr2 0

That seems to be a NULL dereference (0e = page fault, cr2 0 = dereferenced address).

Try:

$ addr2line -e vmlinux -i ffffffff802c9abd

This should print the name of the function that crashed. If you enable CONFIG_DEBUG_INFO you can get the exact line number info too (but remember to replace the ffffffff802c9abd with the new value if you recompile and run it again).

Vegard

Signature · 4 lines
"The animistic metaphor of the bug that maliciously sneaked in while
the programmer was not looking is intellectually dishonest as it
disguises that the error is the programmer's own creation."
	-- E. W. Dijkstra, EWD1036